linux-stable.git/drivers/infiniband/ulp, branch v4.9.8

IB/srp: fix invalid indirect_sg_entries parameter value

2017-02-01T07:33:07+00:00

commit 0a475ef4226e305bdcffe12b401ca1eab06c4913 upstream.

After setting indirect_sg_entries module_param to huge value (e.g 500,000),
srp_alloc_req_data() fails to allocate indirect descriptors for the request
ring (kmalloc fails). This commit enforces the maximum value of
indirect_sg_entries to be SG_MAX_SEGMENTS as signified in module param
description.

Fixes: 65e8617fba17 (scsi: rename SCSI_MAX_{SG, SG_CHAIN}_SEGMENTS)
Fixes: c07d424d6118 (IB/srp: add support for indirect tables that don't fit in SRP_CMD)
Signed-off-by: Israel Rukshin 
Signed-off-by: Max Gurtovoy 
Reviewed-by: Laurence Oberman 
Reviewed-by: Bart Van Assche --
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman

IB/srp: fix mr allocation when the device supports sg gaps

2017-02-01T07:33:07+00:00

commit ad8e66b4a80182174f73487ed25fd2140cf43361 upstream.

If the device support arbitrary sg list mapping (device cap
IB_DEVICE_SG_GAPS_REG set) we allocate the memory regions with
IB_MR_TYPE_SG_GAPS.

Fixes: 509c5f33f4f6 ("IB/srp: Prevent mapping failures")
Signed-off-by: Israel Rukshin 
Signed-off-by: Max Gurtovoy 
Reviewed-by: Leon Romanovsky 
Reviewed-by: Mark Bloch 
Reviewed-by: Yuval Shaia 
Reviewed-by: Bart Van Assche 
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman

IB/iser: Fix sg_tablesize calculation

2017-02-01T07:33:07+00:00

commit 1e5db6c31ade4150c2e2b1a21e39f776c38fea39 upstream.

For devices that can register page list that is bigger than
USHRT_MAX, we actually take the wrong value for sg_tablesize.
E.g: for CX4 max_fast_reg_page_list_len is 65536 (bigger than USHRT_MAX)
so we set sg_tablesize to 0 by mistake. Therefore, each IO that is
bigger than 4k splitted to "< 4k" chunks that cause performance degredation.
Remove wrong sg_tablesize assignment, and use the value that was set during
address resolution handler with the needed casting.

Signed-off-by: Max Gurtovoy 
Reviewed-by: Sagi Grimberg 
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman

IB/IPoIB: Remove can't use GFP_NOIO warning

2017-01-26T07:24:35+00:00

commit 0b59970e7d96edcb3c7f651d9d48e1a59af3c3b0 upstream.

Remove the warning print of "can't use of GFP_NOIO" to avoid prints in
each QP creation when devices aren't supporting IB_QP_CREATE_USE_GFP_NOIO.

This print become more annoying when the IPoIB interface is configured
to work in connected mode.

Fixes: 09b93088d750 ('IB: Add a QP creation flag to use GFP_NOIO allocations')
Signed-off-by: Kamal Heib 
Signed-off-by: Leon Romanovsky 
Reviewed-by: Yuval Shaia 
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman

IPoIB: Avoid reading an uninitialized member variable

2017-01-09T07:32:23+00:00

commit 11b642b84e8c43e8597de031678d15c08dd057bc upstream.

This patch avoids that Coverity reports the following:

    Using uninitialized value port_attr.state when calling printk

Fixes: commit 94232d9ce817 ("IPoIB: Start multicast join process only on active ports")
Signed-off-by: Bart Van Assche 
Cc: Erez Shitrit 
Reviewed-by: Leon Romanovsky 
Signed-off-by: Doug Ledford 
Signed-off-by: Greg Kroah-Hartman

IB/ipoib: move back IB LL address into the hard header

2016-10-14T14:54:53+00:00

After the commit 9207f9d45b0a ("net: preserve IP control block
during GSO segmentation"), the GSO CB and the IPoIB CB conflict.
That destroy the IPoIB address information cached there,
causing a severe performance regression, as better described here:

http://marc.info/?l=linux-kernel&m=146787279825501&w=2

This change moves the data cached by the IPoIB driver from the
skb control lock into the IPoIB hard header, as done before
the commit 936d7de3d736 ("IPoIB: Stop lying about hard_header_len
and use skb->cb to stash LL addresses").
In order to avoid GRO issue, on packet reception, the IPoIB driver
stash into the skb a dummy pseudo header, so that the received
packets have actually a hard header matching the declared length.
To avoid changing the connected mode maximum mtu, the allocated
head buffer size is increased by the pseudo header length.

After this commit, IPoIB performances are back to pre-regression
value.

v2 -> v3: rebased
v1 -> v2: avoid changing the max mtu, increasing the head buf size

Fixes: 9207f9d45b0a ("net: preserve IP control block during GSO segmentation")
Signed-off-by: Paolo Abeni 
Signed-off-by: David S. Miller

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

2016-10-10T00:04:33+00:00

Pull main rdma updates from Doug Ledford:
 "This is the main pull request for the rdma stack this release.  The
  code has been through 0day and I had it tagged for linux-next testing
  for a couple days.

  Summary:

   - updates to mlx5

   - updates to mlx4 (two conflicts, both minor and easily resolved)

   - updates to iw_cxgb4 (one conflict, not so obvious to resolve,
     proper resolution is to keep the code in cxgb4_main.c as it is in
     Linus' tree as attach_uld was refactored and moved into
     cxgb4_uld.c)

   - improvements to uAPI (moved vendor specific API elements to uAPI
     area)

   - add hns-roce driver and hns and hns-roce ACPI reset support

   - conversion of all rdma code away from deprecated
     create_singlethread_workqueue

   - security improvement: remove unsafe ib_get_dma_mr (breaks lustre in
     staging)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (75 commits)
  staging/lustre: Disable InfiniBand support
  iw_cxgb4: add fast-path for small REG_MR operations
  cxgb4: advertise support for FR_NSMR_TPTE_WR
  IB/core: correctly handle rdma_rw_init_mrs() failure
  IB/srp: Fix infinite loop when FMR sg[0].offset != 0
  IB/srp: Remove an unused argument
  IB/core: Improve ib_map_mr_sg() documentation
  IB/mlx4: Fix possible vl/sl field mismatch in LRH header in QP1 packets
  IB/mthca: Move user vendor structures
  IB/nes: Move user vendor structures
  IB/ocrdma: Move user vendor structures
  IB/mlx4: Move user vendor structures
  IB/cxgb4: Move user vendor structures
  IB/cxgb3: Move user vendor structures
  IB/mlx5: Move and decouple user vendor structures
  IB/{core,hw}: Add constant for node_desc
  ipoib: Make ipoib_warn ratelimited
  IB/mlx4/alias_GUID: Remove deprecated create_singlethread_workqueue
  IB/ipoib_verbs: Remove deprecated create_singlethread_workqueue
  IB/ipoib: Remove deprecated create_singlethread_workqueue
  ...

IB/srp: Fix infinite loop when FMR sg[0].offset != 0

2016-10-07T20:54:39+00:00

Avoid that mapping an sg-list in which the first element has a
non-zero offset triggers an infinite loop when using FMR. This
patch makes the FMR mapping code similar to that of ib_sg_to_pages().

Note: older Mellanox HCAs do not support non-zero offsets for FMR.
See also commit 8c4037b501ac ("IB/srp: always avoid non-zero offsets
into an FMR").

Reported-by: Alex Estrin 
Signed-off-by: Bart Van Assche 
Cc: 
Signed-off-by: Doug Ledford

IB/srp: Remove an unused argument

2016-10-07T20:54:39+00:00

Signed-off-by: Bart Van Assche 
Signed-off-by: Doug Ledford

ipoib: Make ipoib_warn ratelimited

2016-10-07T20:54:33+00:00

In certain cases it's possible to be flooded by warning messages. To
cope with such situations make the ipoib_warn macro be ratelimited.
To prevent accidental limiting of legitimate, bursty messages make
the limit fairly liberal by allowing up to 100 messages in 10 seconds.

Signed-off-by: Nikolay Borisov 
Signed-off-by: Doug Ledford