linux-stable.git/drivers/infiniband/ulp, branch linux-2.6.28.y

IPoIB: Fix crash in path_rec_completion()

2008-11-12T18:24:39+00:00

Fix a crash in path_rec_completion() during an SM up/down loop.  If
more than one path record request is issued, the first completion
releases path->done, allowing ipoib_flush_paths() to free the path,
and thus corrupting it for the second completion.

Commit ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM
change events") added the field path->valid and changed the test "if
(!path)" to "if (!path || !path->valid)".  This change made it
possible for a path with an outstanding query to pass the test and
issue another query on the same path.  Having two queries on the same
path leads to a crash.

This fixes .

Signed-off-by: Yossi Etigin 
Signed-off-by: Roland Dreier

IPoIB: Fix hang in ipoib_flush_paths()

2008-11-12T18:24:38+00:00

ipoib_flush_paths() can hang during an SM up/down loop: if
path_rec_start() fails (for instance, because there is no sm_ah), the
path is still added to the path list by neigh_add_path().  Then,
ipoib_flush_paths() will wait for path->done, but it will never
complete because the request was not issued at all.  Fix this by
completing path->done if issuing the query fails.

This fixes .

Signed-off-by: Yossi Etigin 
Signed-off-by: Roland Dreier

IPoIB: Don't enable NAPI when it's already enabled

2008-11-12T18:24:36+00:00

If a P_Key is not present when an interface is created, ipoib_open()
will return after doing napi_enable().  ipoib_open() will be called
again from ipoib_pkey_poll() when the P_Key appears, after NAPI has
already been enabled, and try to enable it again. This triggers a
BUG_ON() in napi_enable().

Fix this by moving the call to napi_enable() to after the test for
P_Key presence.

Signed-off-by: Yossi Etigin 
Signed-off-by: Roland Dreier

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

2008-10-23T15:16:03+00:00

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ehca: Reject dynamic memory add/remove when ehca adapter is present
  IB/ehca: Fix reported max number of QPs and CQs in systems with >1 adapter
  IPoIB: Set netdev offload features properly for child (VLAN) interfaces
  IPoIB: Clean up ethtool support
  mlx4_core: Add Ethernet PCI device IDs
  mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC
  mlx4_core: Multiple port type support
  mlx4_core: Ethernet MAC/VLAN management
  mlx4_core: Get ethernet MTU and default address from firmware
  mlx4_core: Support multiple pre-reserved QP regions
  Update NetEffect maintainer emails to Intel emails
  RDMA/cxgb3: Remove cmid reference on tid allocation failures
  IB/mad: Use krealloc() to resize snoop table
  IPoIB: Always initialize poll_timer to avoid crash on unload
  IB/ehca: Don't allow creating UC QP with SRQ
  mlx4_core: Add QP range reservation support
  RDMA/ucma: Test ucma_alloc_multicast() return against NULL, not with IS_ERR()

IPoIB: Set netdev offload features properly for child (VLAN) interfaces

2008-10-22T22:49:49+00:00

Child devices were created without any offload features set, fix this by
moving the code that computes the features into generic function which is
now called through non-child and child device creation.

Signed-off-by: Or Gerlitz 

-- v1 has a bug where the 'result' flag in ipoib_vlan_add may be used uninitialized
Signed-off-by: Roland Dreier

IPoIB: Clean up ethtool support

2008-10-22T22:49:29+00:00

Add a get_rx_csum method.  Remove the driver's own get_tso method, as
the ethtool kernel code uses the default one if nothing is provided.

Signed-off-by: Or Gerlitz 
Signed-off-by: Roland Dreier

Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

2008-10-17T16:00:23+00:00

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (39 commits)
  [SCSI] sd: fix compile failure with CONFIG_BLK_DEV_INTEGRITY=n
  libiscsi: fix locking in iscsi_eh_device_reset
  libiscsi: check reason why we are stopping iscsi session to determine error value
  [SCSI] iscsi_tcp: return a descriptive error value during connection errors
  [SCSI] libiscsi: rename host reset to target reset
  [SCSI] iscsi class: fix endpoint id handling
  [SCSI] libiscsi: Support drivers initiating session removal
  [SCSI] libiscsi: fix data corruption when target has to resend data-in packets
  [SCSI] sd: Switch kernel printing level for DIF messages
  [SCSI] sd: Correctly handle all combinations of DIF and DIX
  [SCSI] sd: Always print actual protection_type
  [SCSI] sd: Issue correct protection operation
  [SCSI] scsi_error: fix target reset handling
  [SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc vendor events
  [SCSI] lpfc 8.2.8 v2 : Add sysfs control of target queue depth handling
  [SCSI] lpfc 8.2.8 v2 : Revert target busy in favor of transport disrupted
  [SCSI] scsi_dh_alua: remove REQ_NOMERGE
  [SCSI] lpfc 8.2.8 : update driver version to 8.2.8
  [SCSI] lpfc 8.2.8 : Add MSI-X support
  [SCSI] lpfc 8.2.8 : Update driver to use new Host byte error code DID_TRANSPORT_DISRUPTED
  ...

vfs: Use const for kernel parser table

2008-10-13T17:10:37+00:00

This is a much better version of a previous patch to make the parser
tables constant. Rather than changing the typedef, we put the "const" in
all the various places where its required, allowing the __initconst
exception for nfsroot which was the cause of the previous trouble.

This was posted for review some time ago and I believe its been in -mm
since then.

Signed-off-by: Steven Whitehouse 
Cc: Alexander Viro 
Signed-off-by: Linus Torvalds

[SCSI] libiscsi: rename host reset to target reset

2008-10-13T13:28:59+00:00

I had this in my patchset to add target reset support, but
it got dropped due to patching conflicts. This initial patch
just renames the function and users. We are actually just
dropping the session, and so this does not have anything to do
with the host exactly. It does for software iscsi because
we allocate a host per session, but for cxgb3i this makes no
sense.

Signed-off-by: Mike Christie 
Signed-off-by: James Bottomley

[SCSI] libiscsi: Support drivers initiating session removal

2008-10-13T13:28:59+00:00

If the driver knows when hardware is removed like with cxgb3i,
bnx2i, qla4xxx and iser then we will want to remove the sessions/devices
that are bound to that device before removing the host.

cxgb3i and in the future bnx2i will remove the host and that will
remove all the sessions on the hba. iser can call iscsi_kill_session
when it gets an event that indicates that a hca is removed.
And when qla4xxx is hooked in to the lib (it is only hooked into
the class right now) it can call iscsi remove host like the
partial offload card drivers.

Signed-off-by: Mike Christie 
Signed-off-by: James Bottomley