linux-stable.git/drivers/infiniband/core/cache.c, branch linux-3.13.y

IB/core: Add ib_find_exact_cached_pkey()

2012-10-01T03:33:30+00:00

When P_Key tables potentially contain both full and partial membership
copies for the same P_Key, we need a function to find the index for an
exact (16-bit) P_Key.

This is necessary when the master forwards QP1 MADs sent by guests.
If the guest has sent the MAD with a limited membership P_Key, we need
to to forward the MAD using the same limited membership P_Key.  Since
the master may have both the limited and the full member P_Keys in its
table, we must make sure to retrieve the limited membership P_Key in
this case.

Signed-off-by: Jack Morgenstein 
Signed-off-by: Or Gerlitz 
Signed-off-by: Roland Dreier

IB/core: Handle table with full and partial membership for the same P_Key

2012-10-01T03:33:29+00:00

Extend the cached and non-cached P_Key table lookups to handle limited
and full membership of the same P_Key to co-exist in the P_Key table.

This is necessary for SR-IOV, to allow for some guests would to have
the full membership P_Key in their virtual P_Key table, while other
guests on the same physical HCA would have the limited one.
To support this, we need both the limited and full membership P_Keys
to be present in the master's (hypervisor physical port) P_Key table.

The algorithm for handling P_Key tables which contain both the limited
and the full membership versions of the same P_Key works as follows:

When scanning the P_Key table for a 15-bit P_Key:

A. If there is a full member version of that P_Key anywhere in the
    table, return its index (even if a limited-member version of the
    P_Key exists earlier in the table).

B. If the full member version is not in the table, but the
   limited-member version is in the table, return the index of the
   limited P_Key.

Signed-off-by: Liran Liss 
Signed-off-by: Jack Morgenstein 
Signed-off-by: Or Gerlitz 
Signed-off-by: Roland Dreier

IB/core: Add GID change event

2011-07-19T04:04:30+00:00

Add IB GID change event type.  This is needed for IBoE when the HW
driver updates the GID (e.g when new VLANs are added/deleted) table
and the change should be reflected to the IB core cache.

Signed-off-by: Eli Cohen 
Signed-off-by: Or Gerlitz 
Signed-off-by: Roland Dreier

RDMA: Update workqueue usage

2011-01-17T05:16:31+00:00

* ib_wq is added, which is used as the common workqueue for infiniband
  instead of the system workqueue.  All system workqueue usages
  including flush_scheduled_work() callers are converted to use and
  flush ib_wq.

* cancel_delayed_work() + flush_scheduled_work() converted to
  cancel_delayed_work_sync().

* qib_wq is removed and ib_wq is used instead.

This is to prepare for deprecation of flush_scheduled_work().

Signed-off-by: Tejun Heo 
Signed-off-by: Roland Dreier

RDMA: Remove subversion $Id tags

2008-07-15T06:48:44+00:00

They don't get updated by git and so they're worse than useless.

Signed-off-by: Roland Dreier

Detach sched.h from mm.h

2007-05-21T16:18:19+00:00

First thing mm.h does is including sched.h solely for can_do_mlock() inline
function which has "current" dereference inside. By dealing with can_do_mlock()
mm.h can be detached from sched.h which is good. See below, why.

This patch
a) removes unconditional inclusion of sched.h from mm.h
b) makes can_do_mlock() normal function in mm/mlock.c
c) exports can_do_mlock() to not break compilation
d) adds sched.h inclusions back to files that were getting it indirectly.
e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
   getting them indirectly

Net result is:
a) mm.h users would get less code to open, read, preprocess, parse, ... if
   they don't need sched.h
b) sched.h stops being dependency for significant number of files:
   on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
   after patch it's only 3744 (-8.3%).

Cross-compile tested on

	all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
	alpha alpha-up
	arm
	i386 i386-up i386-defconfig i386-allnoconfig
	ia64 ia64-up
	m68k
	mips
	parisc parisc-up
	powerpc powerpc-up
	s390 s390-up
	sparc sparc-up
	sparc64 sparc64-up
	um-x86_64
	x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig

as well as my two usual configs.

Signed-off-by: Alexey Dobriyan 
Signed-off-by: Linus Torvalds

[PATCH] remove many unneeded #includes of sched.h

2007-02-14T16:09:54+00:00

After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau 
Acked-by: Russell King 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

WorkStruct: make allyesconfig

2006-11-22T14:57:56+00:00

Fix up for make allyesconfig.

Signed-Off-By: David Howells

RDMA: iWARP Core Changes.

2006-09-22T22:22:47+00:00

Modifications to the existing rdma header files, core files, drivers,
and ulp files to support iWARP, including:
 - Hook iWARP CM into the build system and use it in rdma_cm.
 - Convert enum ib_node_type to enum rdma_node_type, which includes
   the possibility of RDMA_NODE_RNIC, and update everything for this.

Signed-off-by: Tom Tucker 
Signed-off-by: Steve Wise 
Signed-off-by: Roland Dreier

IB/core: Fix SM LID/LID change with client reregister set

2006-08-16T16:54:47+00:00

After commit 12bbb2b7be7f5564952ebe0196623e97464b8ac5, when SM LID
change or LID change MAD also has a client reregistration bit set,
only CLIENT_REREGISTER event is generated.

As a result, the sa_query module and the cache module don't update the
port information, and ULPs (e.g. IPoIB) stop working.  This is the
regression we observe as compared to 2.6.17.

Rather than generate multiple events (which would have negative
performance impact), let us simply let cache and SA query respond to
reregister event in the same way as to LID and SM change events.

Signed-off-by: Jack Morgenstein 
Signed-off-by: Michael S. Tsirkin 
Signed-off-by: Roland Dreier