linux-stable.git/drivers/iio, branch v6.1.78

iio: adc: ad7091r: Enable internal vref if external vref is not supplied

2024-02-01T00:17:00+00:00

[ Upstream commit e71c5c89bcb165a02df35325aa13d1ee40112401 ]

The ADC needs a voltage reference to work correctly.
Users can provide an external voltage reference or use the chip internal
reference to operate the ADC.
The availability of an in chip reference for the ADC saves the user from
having to supply an external voltage reference, which makes the external
reference an optional property as described in the device tree
documentation.
Though, to use the internal reference, it must be enabled by writing to
the configuration register.
Enable AD7091R internal voltage reference if no external vref is supplied.

Fixes: 260442cc5be4 ("iio: adc: ad7091r5: Add scale and external VREF support")
Signed-off-by: Marcelo Schmitt 
Link: https://lore.kernel.org/r/b865033fa6a4fc4bf2b4a98ec51a6144e0f64f77.1703013352.git.marcelo.schmitt1@gmail.com
Cc: 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin

iio: adc: ad7091r: Allow users to configure device events

2024-02-01T00:16:58+00:00

[ Upstream commit 020e71c7ffc25dfe29ed9be6c2d39af7bd7f661f ]

AD7091R-5 devices are supported by the ad7091r-5 driver together with
the ad7091r-base driver. Those drivers declared iio events for notifying
user space when ADC readings fall bellow the thresholds of low limit
registers or above the values set in high limit registers.
However, to configure iio events and their thresholds, a set of callback
functions must be implemented and those were not present until now.
The consequence of trying to configure ad7091r-5 events without the
proper callback functions was a null pointer dereference in the kernel
because the pointers to the callback functions were not set.

Implement event configuration callbacks allowing users to read/write
event thresholds and enable/disable event generation.

Since the event spec structs are generic to AD7091R devices, also move
those from the ad7091r-5 driver the base driver so they can be reused
when support for ad7091r-2/-4/-8 be added.

Fixes: ca69300173b6 ("iio: adc: Add support for AD7091R5 ADC")
Suggested-by: David Lechner 
Signed-off-by: Marcelo Schmitt 
Link: https://lore.kernel.org/r/59552d3548dabd56adc3107b7b4869afee2b0c3c.1703013352.git.marcelo.schmitt1@gmail.com
Cc: 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin

iio: adc: ad7091r: Set alert bit in config register

2024-02-01T00:16:58+00:00

[ Upstream commit 149694f5e79b0c7a36ceb76e7c0d590db8f151c1 ]

The ad7091r-base driver sets up an interrupt handler for firing events
when inputs are either above or below a certain threshold.
However, for the interrupt signal to come from the device it must be
configured to enable the ALERT/BUSY/GPO pin to be used as ALERT, which
was not being done until now.
Enable interrupt signals on the ALERT/BUSY/GPO pin by setting the proper
bit in the configuration register.

Signed-off-by: Marcelo Schmitt 
Link: https://lore.kernel.org/r/e8da2ee98d6df88318b14baf3dc9630e20218418.1702746240.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron 
Stable-dep-of: 020e71c7ffc2 ("iio: adc: ad7091r: Allow users to configure device events")
Signed-off-by: Sasha Levin

iio: adc: ad9467: fix scale setting

2024-01-25T23:27:47+00:00

[ Upstream commit b73f08bb7fe5a0901646ca5ceaa1e7a2d5ee6293 ]

When reading in_voltage_scale we can get something like:

root@analog:/sys/bus/iio/devices/iio:device2# cat in_voltage_scale
0.038146

However, when reading the available options:

root@analog:/sys/bus/iio/devices/iio:device2# cat
in_voltage_scale_available
2000.000000 2100.000006 2200.000007 2300.000008 2400.000009 2500.000010

which does not make sense. Moreover, when trying to set a new scale we
get an error because there's no call to __ad9467_get_scale() to give us
values as given when reading in_voltage_scale. Fix it by computing the
available scales during probe and properly pass the list when
.read_available() is called.

While at it, change to use .read_available() from iio_info. Also note
that to properly fix this, adi-axi-adc.c has to be changed accordingly.

Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC")
Signed-off-by: Nuno Sa 
Reviewed-by: David Lechner 
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-4-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin

iio: adc: ad9467: don't ignore error codes

2024-01-25T23:27:46+00:00

[ Upstream commit e072e149cfb827e0ab4cafb0547e9658e35393cd ]

Make sure functions that return errors are not ignored.

Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC")
Reviewed-by: David Lechner 
Signed-off-by: Nuno Sa 
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-2-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin

iio: adc: ad9467: fix reset gpio handling

2024-01-25T23:27:46+00:00

[ Upstream commit 76f028539cf360f750efd8cde560edda298e4c6b ]

The reset gpio was being handled with inverted polarity. This means that
as far as gpiolib is concerned we were actually leaving the pin asserted
(in theory, this would mean reset). However, inverting the polarity in
devicetree made things work. Fix it by doing it the proper way and how
gpiolib expects it to be done.

While at it, moved the handling to it's own function and dropped
'reset_gpio' from the 'struct ad9467_state' as we only need it during
probe. On top of that, refactored things so that we now request the gpio
asserted (i.e in reset) and then de-assert it. Also note that we now use
gpiod_set_value_cansleep() instead of gpiod_direction_output() as we
already request the pin as output.

Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC")
Reviewed-by: David Lechner 
Signed-off-by: Nuno Sa 
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-1-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin

iio: adc: ad7091r: Pass iio_dev to event handler

2024-01-25T23:27:44+00:00

commit a25a7df518fc71b1ba981d691e9322e645d2689c upstream.

Previous version of ad7091r event handler received the ADC state pointer
and retrieved the iio device from driver data field with dev_get_drvdata().
However, no driver data have ever been set, which led to null pointer
dereference when running the event handler.

Pass the iio device to the event handler and retrieve the ADC state struct
from it so we avoid the null pointer dereference and save the driver from
filling the driver data field.

Fixes: ca69300173b6 ("iio: adc: Add support for AD7091R5 ADC")
Signed-off-by: Marcelo Schmitt 
Link: https://lore.kernel.org/r/5024b764107463de9578d5b3b0a3d5678e307b1a.1702746240.git.marcelo.schmitt1@gmail.com
Cc: 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: imu: adis16475: add spi_device_id table

2024-01-05T14:18:37+00:00

[ Upstream commit ee4d79055aeea27f1b8c42233cc0c90d0a8b5355 ]

This prevents the warning message "SPI driver has no spi_device_id for..."
when registering the driver. More importantly, it makes sure that
module autoloading works as spi relies on spi: modaliases and not of.

While at it, move the of_device_id table to it's natural place.

Fixes: fff7352bf7a3c ("iio: imu: Add support for adis16475")
Signed-off-by: Nuno Sa 
Link: https://lore.kernel.org/r/20231102125258.3284830-1-nuno.sa@analog.com
Cc: 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin

iio: triggered-buffer: prevent possible freeing of wrong buffer

2024-01-01T12:39:01+00:00

commit bce61476dc82f114e24e9c2e11fb064781ec563c upstream.

Commit ee708e6baacd ("iio: buffer: introduce support for attaching more
IIO buffers") introduced support for multiple buffers per indio_dev but
left indio_dev->buffer for a few legacy use cases.

In the case of the triggered buffer, iio_triggered_buffer_cleanup()
still assumes that indio_dev->buffer points to the buffer allocated by
iio_triggered_buffer_setup_ext(). However, since
iio_triggered_buffer_setup_ext() now calls iio_device_attach_buffer()
to attach the buffer, indio_dev->buffer will only point to the buffer
allocated by iio_device_attach_buffer() if it the first buffer attached.

This adds a check to make sure that no other buffer has been attached
yet to ensure that indio_dev->buffer will be assigned when
iio_device_attach_buffer() is called.

As per discussion in the review thread, we may want to deal with multiple
triggers per device, but this is a fix for the issue in the meantime and
any such support would be unlikely to be suitable for a backport.

Fixes: ee708e6baacd ("iio: buffer: introduce support for attaching more IIO buffers")
Signed-off-by: David Lechner 
Acked-by: Nuno Sa 
Link: https://lore.kernel.org/r/20231031210521.1661552-1-dlechner@baylibre.com
Cc: 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: adc: ti_am335x_adc: Fix return value check of tiadc_request_dma()

2024-01-01T12:39:01+00:00

commit 60576e84c187043cef11f11d015249e71151d35a upstream.

Fix wrong handling of a DMA request where the probing only failed
if -EPROPE_DEFER was returned. Instead, let us fail if a non -ENODEV
value is returned. This makes DMAs explicitly optional. Even if the
DMA request is unsuccessfully, the ADC can still work properly.
We do also handle the defer probe case by making use of dev_err_probe().

Fixes: f438b9da75eb ("drivers: iio: ti_am335x_adc: add dma support")
Signed-off-by: Wadim Egorov 
Reviewed-by: Bhavya Kapoor 
Link: https://lore.kernel.org/r/20230925134427.214556-1-w.egorov@phytec.de
Cc: 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman