linux-stable.git/drivers/iio, branch v5.2.9

iio: adc: max9611: Fix misuse of GENMASK macro

2019-08-16T08:10:49+00:00

commit ae8cc91a7d85e018c0c267f580820b2bb558cd48 upstream.

Arguments are supposed to be ordered high then low.

Signed-off-by: Joe Perches 
Fixes: 69780a3bbc0b ("iio: adc: Add Maxim max9611 ADC driver")
Cc: 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: adc: gyroadc: fix uninitialized return code

2019-08-16T08:10:49+00:00

commit 90c6260c1905a68fb596844087f2223bd4657fee upstream.

gcc-9 complains about a blatant uninitialized variable use that
all earlier compiler versions missed:

drivers/iio/adc/rcar-gyroadc.c:510:5: warning: 'ret' may be used uninitialized in this function [-Wmaybe-uninitialized]

Return -EINVAL instead here and a few lines above it where
we accidentally return 0 on failure.

Cc: stable@vger.kernel.org
Fixes: 059c53b32329 ("iio: adc: Add Renesas GyroADC driver")
Signed-off-by: Arnd Bergmann 
Reviewed-by: Wolfram Sang 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: imu: mpu6050: add missing available scan masks

2019-08-16T08:10:49+00:00

commit 1244a720572fd1680ac8d6b8a4235f2e8557b810 upstream.

Driver only supports 3-axis gyro and/or 3-axis accel.
For icm20602, temp data is mandatory for all configurations.

Fix all single and double axis configurations (almost never used) and more
importantly fix 3-axis gyro and 6-axis accel+gyro buffer on icm20602 when
temp data is not enabled.

Signed-off-by: Jean-Baptiste Maneyrol 
Fixes: 1615fe41a195 ("iio: imu: mpu6050: Fix FIFO layout for ICM20602")
Cc: 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: cros_ec_accel_legacy: Fix incorrect channel setting

2019-08-16T08:10:48+00:00

commit 6cdff99c9f7d7d28b87cf05dd464f7c7736332ae upstream.

INFO_SCALE is set both for each channel and all channels.
iio is using all channel setting, so the error was not user visible.

Signed-off-by: Gwendal Grignou 
Cc: 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

IIO: Ingenic JZ47xx: Set clock divider on probe

2019-08-16T08:10:48+00:00

commit 5a304e1a4ea000177cf25f5ecf26e786dda25b98 upstream.

The SADC component can run at up to 8 MHz on JZ4725B, but is fed
a 12 MHz input clock (EXT). Divide it by two to get 6 MHz, then
set up another divider to match, to produce a 10us clock.

If the clock dividers are left on their power-on defaults (a divider
of 1), the SADC mostly works, but will occasionally produce erroneous
readings. This led to button presses being detected out of nowhere on
the RS90 every few minutes. With this change, no ghost button presses
were logged in almost a day worth of testing.

The ADCLK register for configuring clock dividers doesn't exist on
JZ4740, so avoid writing it there.

A function has been introduced rather than a flag because there is a lot
of variation between the ADCLK registers on JZ47xx SoCs, both in
the internal layout of the register and in the frequency range
supported by the SADC. So this solution should make it easier
to add support for other JZ47xx SoCs later.

Fixes: 1a78daea107d ("iio: adc: probe should set clock divider")
Signed-off-by: Maarten ter Huurne 
Signed-off-by: Artur Rojek 
Cc: 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: adxl372: fix iio_triggered_buffer_{pre,post}enable positions

2019-07-31T05:24:40+00:00

[ Upstream commit 0e4f0b42f42d88507b48282c8915f502551534e4 ]

The iio_triggered_buffer_{predisable,postenable} functions attach/detach
the poll functions.

For the predisable hook, the disable code should occur before detaching
the poll func, and for the postenable hook, the poll func should be
attached before the enable code.

Signed-off-by: Alexandru Ardelean 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin

iio: adc: stm32-dfsdm: missing error case during probe

2019-07-31T05:24:29+00:00

[ Upstream commit d2fc0156963cae8f1eec8e2dd645fbbf1e1c1c8e ]

During probe, check the devm_ioremap_resource() error value.
Also return the devm_clk_get() error value instead of -EINVAL.

Signed-off-by: Fabien Dessenne 
Acked-by: Fabrice Gasnier 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin

iio: adc: stm32-dfsdm: manage the get_irq error case

2019-07-31T05:24:28+00:00

[ Upstream commit 3e53ef91f826957dec013c47707ffc1bb42b42d7 ]

During probe, check the "get_irq" error value.

Signed-off-by: Fabien Dessenne 
Acked-by: Fabrice Gasnier 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin

iio: adc: stm32-adc: add missing vdda-supply

2019-07-14T06:01:12+00:00

commit 7685010fca2ba0284f31fd1380df3cffc96d847e upstream.

Add missing vdda-supply, analog power supply, to STM32 ADC. When vdda is
an independent supply, it needs to be properly turned on or off to supply
the ADC.

Signed-off-by: Fabrice Gasnier 
Fixes: 1add69880240 ("iio: adc: Add support for STM32 ADC core").
Cc: 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'staging-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2019-06-21T17:20:19+00:00

Pull staging/IIO/counter fixes from Greg KH:
 "Here are some small driver bugfixes for some staging/iio/counter
  drivers.

  Staging and IIO have been lumped together for a while, as those
  subsystems cross the areas a log, and counter is used by IIO, so
  that's why they are all in one pull request here.

  These are small fixes for reported issues in some iio drivers, the
  erofs filesystem, and a build issue for counter code.

  All have been in linux-next with no reported issues"

* tag 'staging-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: erofs: add requirements field in superblock
  counter/ftm-quaddec: Add missing dependencies in Kconfig
  staging: iio: adt7316: Fix build errors when GPIOLIB is not set
  iio: temperature: mlx90632 Relax the compatibility check
  iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller
  staging:iio:ad7150: fix threshold mode config bit