linux-stable.git/drivers/iio, branch v4.9.78

iio: adc: ti-ads1015: add 10% to conversion wait time

2017-12-09T21:01:49+00:00

[ Upstream commit fe895ac88b9fbdf2026f0bfd56c82747bb9d7c48 ]

As user's guide "ADS1015EVM, ADS1115EVM, ADS1015EVM-PDK, ADS1115EVM-PDK
User Guide (Rev. B)" (http://www.ti.com/lit/ug/sbau157b/sbau157b.pdf)
states at page 16:
"Note that both the ADS1115 and ADS1015 have internal clocks with a ±10%
accuracy. If performing FFT tests, frequencies may appear to be incorrect
as a result of this tolerance range.", add those 10% to converion wait
time.

Cc: Daniel Baluta 
Cc: Jonathan Cameron 
Signed-off-by: Ladislav Michl 
Reviewed-by: Akinobu Mita 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iio: light: fix improper return value

2017-11-30T08:39:13+00:00

[ Upstream commit db4e5376d058af8924fafd0520a0942d92538d0e ]

In function cm3232_reg_init(), it returns 0 even if the last call to
i2c_smbus_write_byte_data() returns a negative value (indicates error).
As a result, the return value may be inconsistent with the execution
status, and the caller of cm3232_reg_init() will not be able to detect
the error. This patch fixes the bug.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188641

Signed-off-by: Pan Bian 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iio: proximity: sx9500: claim direct mode during raw proximity reads

2017-11-15T14:53:14+00:00

[ Upstream commit 6b2e7589b82ff534dd5c6d67dd83c53f13691bec ]

Driver was checking for direct mode but not locking it.  Use the
claim/release helper functions to guarantee the device stays in
direct mode during raw reads of proximity data.

Signed-off-by: Alison Schofield 
Reviewed-by: Vlad Dogaru 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iio: magnetometer: mag3110: claim direct mode during raw writes

2017-11-15T14:53:14+00:00

[ Upstream commit 80dea21f95a4672cce545f48dc2ca500b69a2584 ]

Driver was checking for direct mode but not locking it.  Use
claim/release helper functions to guarantee the device stays
in direct mode during raw writes.

Signed-off-by: Alison Schofield 
Acked-by: Peter Meerwald-Stadler 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iio: pressure: ms5611: claim direct mode during oversampling changes

2017-11-15T14:53:14+00:00

[ Upstream commit 3bc1abcddb24f55b9c251e03caa4f9bd22ff748b ]

Driver was checking for direct mode before changing oversampling
ratios, but was not locking it.  Use the claim/release helper
functions to guarantee the device stays in direct mode while the
oversampling ratios are being updated.  Continue to use the drivers
private state lock to protect against conflicting direct mode access
of the state data.

Signed-off-by: Alison Schofield 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iio: trigger: free trigger resource correctly

2017-11-15T14:53:14+00:00

[ Upstream commit 10e840dfb0b7fc345082dd9e5fff3c1c02e7690e ]

These stand-alone trigger drivers were using iio_trigger_put()
where they should have been using iio_trigger_free().  The
iio_trigger_put() adds a module_put which is bad since they
never did a module_get.

In the sysfs driver, module_get/put's are used as triggers are
added & removed. This extra module_put() occurs on an error path
in the probe routine (probably rare).

In the bfin-timer & interrupt trigger drivers, the module resources
are not explicitly managed, so it's doing a put on something that
was never get'd.  It occurs on the probe error path and on the
remove path (not so rare).

Tested with the sysfs trigger driver.
The bfin & interrupt drivers were build tested & inspected only.

Signed-off-by: Alison Schofield 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iio: dummy: events: Add missing break

2017-10-27T08:38:06+00:00

commit be94a6f6d488b4767662e8949dc62361bd1d6311 upstream.

Add missing break in iio_simple_dummy_write_event_config() for the voltage
threshold event enable attribute. Without this writing to the
in_voltage0_thresh_rising_en always returns -EINVAL even though the change
was correctly applied.

Fixes: 3e34e650db197 ("iio: dummy: Demonstrate the usage of new channel types")
Signed-off-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: adc: xilinx: Fix error handling

2017-10-21T15:21:34+00:00

[ Upstream commit ca1c39ef76376b67303d01f94fe98bb68bb3861a ]

Reorder error handling labels in order to match the way resources have
been allocated.

Signed-off-by: Christophe JAILLET 
Acked-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

iio: adc: mcp320x: Fix oops on module unload

2017-10-12T09:51:19+00:00

commit 0964e40947a630a2a6f724e968246992f97bcf1c upstream.

The driver calls spi_get_drvdata() in its ->remove hook even though it
has never called spi_set_drvdata().  Stack trace for posterity:

Unable to handle kernel NULL pointer dereference at virtual address 00000220
Internal error: Oops: 5 [#1] SMP ARM
[<8072f564>] (mutex_lock) from [<7f1400d0>] (iio_device_unregister+0x24/0x7c [industrialio])
[<7f1400d0>] (iio_device_unregister [industrialio]) from [<7f15e020>] (mcp320x_remove+0x20/0x30 [mcp320x])
[<7f15e020>] (mcp320x_remove [mcp320x]) from [<8055a8cc>] (spi_drv_remove+0x2c/0x44)
[<8055a8cc>] (spi_drv_remove) from [<805087bc>] (__device_release_driver+0x98/0x134)
[<805087bc>] (__device_release_driver) from [<80509180>] (driver_detach+0xdc/0xe0)
[<80509180>] (driver_detach) from [<8050823c>] (bus_remove_driver+0x5c/0xb0)
[<8050823c>] (bus_remove_driver) from [<80509ab0>] (driver_unregister+0x38/0x58)
[<80509ab0>] (driver_unregister) from [<7f15e69c>] (mcp320x_driver_exit+0x14/0x1c [mcp320x])
[<7f15e69c>] (mcp320x_driver_exit [mcp320x]) from [<801a78d0>] (SyS_delete_module+0x184/0x1d0)
[<801a78d0>] (SyS_delete_module) from [<80108100>] (ret_fast_syscall+0x0/0x1c)

Fixes: f5ce4a7a9291 ("iio: adc: add driver for MCP3204/08 12-bit ADC")
Cc: Oskar Andero 
Signed-off-by: Lukas Wunner 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

iio: adc: mcp320x: Fix readout of negative voltages

2017-10-12T09:51:19+00:00

commit e6f4794371ee7cce1339e7ca9542f1e703c5f84a upstream.

Commit f686a36b4b79 ("iio: adc: mcp320x: Add support for mcp3301")
returns a signed voltage from mcp320x_adc_conversion() but neglects that
the caller interprets a negative return value as failure.  Only mcp3301
(and the upcoming mcp3550/1/3) is affected as the other chips are
incapable of measuring negative voltages.

Fix and while at it, add mcp3301 to the list of supported chips at the
top of the file.

Fixes: f686a36b4b79 ("iio: adc: mcp320x: Add support for mcp3301")
Cc: Andrea Galbusera 
Signed-off-by: Lukas Wunner 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman