linux-stable.git/drivers/iio, branch v4.1.26 Linux kernel stable tree iio: ak8975: Fix NULL pointer exception on early interrupt 2016-05-17T17:42:38+00:00 Krzysztof Kozlowski k.kozlowski@samsung.com 2016-04-04T05:54:59+00:00 e7e16bb686861933ff351e945432bd607fc9fa02 [ Upstream commit 07d2390e36ee5b3265e9cc8305f2a106c8721e16 ] In certain probe conditions the interrupt came right after registering the handler causing a NULL pointer exception because of uninitialized waitqueue: $ udevadm trigger i2c-gpio i2c-gpio-1: using pins 143 (SDA) and 144 (SCL) i2c-gpio i2c-gpio-3: using pins 53 (SDA) and 52 (SCL) Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = e8b38000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: snd_soc_i2s(+) i2c_gpio(+) snd_soc_idma snd_soc_s3c_dma snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd soundcore ac97_bus spi_s3c64xx pwm_samsung dwc2 exynos_adc phy_exynos_usb2 exynosdrm exynos_rng rng_core rtc_s3c CPU: 0 PID: 717 Comm: data-provider-m Not tainted 4.6.0-rc1-next-20160401-00011-g1b8d87473b9e-dirty #101 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) (...) (__wake_up_common) from [<c0379624>] (__wake_up+0x38/0x4c) (__wake_up) from [<c0a41d30>] (ak8975_irq_handler+0x28/0x30) (ak8975_irq_handler) from [<c0386720>] (handle_irq_event_percpu+0x88/0x140) (handle_irq_event_percpu) from [<c038681c>] (handle_irq_event+0x44/0x68) (handle_irq_event) from [<c0389c40>] (handle_edge_irq+0xf0/0x19c) (handle_edge_irq) from [<c0385e04>] (generic_handle_irq+0x24/0x34) (generic_handle_irq) from [<c05ee360>] (exynos_eint_gpio_irq+0x50/0x68) (exynos_eint_gpio_irq) from [<c0386720>] (handle_irq_event_percpu+0x88/0x140) (handle_irq_event_percpu) from [<c038681c>] (handle_irq_event+0x44/0x68) (handle_irq_event) from [<c0389a70>] (handle_fasteoi_irq+0xb4/0x194) (handle_fasteoi_irq) from [<c0385e04>] (generic_handle_irq+0x24/0x34) (generic_handle_irq) from [<c03860b4>] (__handle_domain_irq+0x5c/0xb4) (__handle_domain_irq) from [<c0301774>] (gic_handle_irq+0x54/0x94) (gic_handle_irq) from [<c030c910>] (__irq_usr+0x50/0x80) The bug was reproduced on exynos4412-trats2 (with a max77693 device also using i2c-gpio) after building max77693 as a module. Cc: <stable@vger.kernel.org> Fixes: 94a6d5cf7caa ("iio:ak8975 Implement data ready interrupt handling") Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Gregor Boirie <gregor.boirie@parrot.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> 
[ Upstream commit 07d2390e36ee5b3265e9cc8305f2a106c8721e16 ]

In certain probe conditions the interrupt came right after registering
the handler causing a NULL pointer exception because of uninitialized
waitqueue:

$ udevadm trigger
i2c-gpio i2c-gpio-1: using pins 143 (SDA) and 144 (SCL)
i2c-gpio i2c-gpio-3: using pins 53 (SDA) and 52 (SCL)
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = e8b38000
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in: snd_soc_i2s(+) i2c_gpio(+) snd_soc_idma snd_soc_s3c_dma snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd soundcore ac97_bus spi_s3c64xx pwm_samsung dwc2 exynos_adc phy_exynos_usb2 exynosdrm exynos_rng rng_core rtc_s3c
CPU: 0 PID: 717 Comm: data-provider-m Not tainted 4.6.0-rc1-next-20160401-00011-g1b8d87473b9e-dirty #101
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
(...)
(__wake_up_common) from [<c0379624>] (__wake_up+0x38/0x4c)
(__wake_up) from [<c0a41d30>] (ak8975_irq_handler+0x28/0x30)
(ak8975_irq_handler) from [<c0386720>] (handle_irq_event_percpu+0x88/0x140)
(handle_irq_event_percpu) from [<c038681c>] (handle_irq_event+0x44/0x68)
(handle_irq_event) from [<c0389c40>] (handle_edge_irq+0xf0/0x19c)
(handle_edge_irq) from [<c0385e04>] (generic_handle_irq+0x24/0x34)
(generic_handle_irq) from [<c05ee360>] (exynos_eint_gpio_irq+0x50/0x68)
(exynos_eint_gpio_irq) from [<c0386720>] (handle_irq_event_percpu+0x88/0x140)
(handle_irq_event_percpu) from [<c038681c>] (handle_irq_event+0x44/0x68)
(handle_irq_event) from [<c0389a70>] (handle_fasteoi_irq+0xb4/0x194)
(handle_fasteoi_irq) from [<c0385e04>] (generic_handle_irq+0x24/0x34)
(generic_handle_irq) from [<c03860b4>] (__handle_domain_irq+0x5c/0xb4)
(__handle_domain_irq) from [<c0301774>] (gic_handle_irq+0x54/0x94)
(gic_handle_irq) from [<c030c910>] (__irq_usr+0x50/0x80)

The bug was reproduced on exynos4412-trats2 (with a max77693 device also
using i2c-gpio) after building max77693 as a module.

Cc: <stable@vger.kernel.org>
Fixes: 94a6d5cf7caa ("iio:ak8975 Implement data ready interrupt handling")
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Tested-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
iio: pressure: mpl115: fix temperature offset sign 2016-04-12T02:07:36+00:00 Akinobu Mita akinobu.mita@gmail.com 2016-01-20T16:07:31+00:00 17fe8c8b306e4b76078b8b103e1f344970409378 [ Upstream commit 431386e783a3a6c8b7707bee32d18c353b8688b2 ] According to the datasheet, the resolusion of temperature sensor is -5.35 counts/C. Temperature ADC is 472 counts at 25C. (https://www.sparkfun.com/datasheets/Sensors/Pressure/MPL115A1.pdf NOTE: This is older revision, but this information is removed from the latest datasheet from nxp somehow) Temp [C] = (Tadc - 472) / -5.35 + 25 = (Tadc - 605.750000) * -0.186915888 So the correct offset is -605.750000. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> 
[ Upstream commit 431386e783a3a6c8b7707bee32d18c353b8688b2 ]

According to the datasheet, the resolusion of temperature sensor is
-5.35 counts/C. Temperature ADC is 472 counts at 25C.
(https://www.sparkfun.com/datasheets/Sensors/Pressure/MPL115A1.pdf
NOTE: This is older revision, but this information is removed from the
latest datasheet from nxp somehow)

Temp [C] = (Tadc - 472) / -5.35 + 25
         = (Tadc - 605.750000) * -0.186915888

So the correct offset is -605.750000.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
iio: dac: mcp4725: set iio name property in sysfs 2016-04-12T02:07:36+00:00 Yong Li sdliyong@gmail.com 2016-01-06T01:09:43+00:00 5b20b25abab6faba0c91a4d7ccde93e134f29d6d [ Upstream commit 97a249e98a72d6b79fb7350a8dd56b147e9d5bdb ] Without this change, the name entity for mcp4725 is missing in /sys/bus/iio/devices/iio\:device*/name With this change, name is reported correctly Signed-off-by: Yong Li <sdliyong@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> 
[ Upstream commit 97a249e98a72d6b79fb7350a8dd56b147e9d5bdb ]

Without this change, the name entity for mcp4725 is missing in
/sys/bus/iio/devices/iio\:device*/name

With this change, name is reported correctly

Signed-off-by: Yong Li <sdliyong@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
iio: adis_buffer: Fix out-of-bounds memory access 2016-04-12T02:07:36+00:00 Lars-Peter Clausen lars@metafoo.de 2015-11-27T13:55:56+00:00 3e77cb858ce67861e142186e3b131c04ddbc6edd [ Upstream commit d590faf9e8f8509a0a0aa79c38e87fcc6b913248 ] The SPI tx and rx buffers are both supposed to be scan_bytes amount of bytes large and a common allocation is used to allocate both buffers. This puts the beginning of the tx buffer scan_bytes bytes after the rx buffer. The initialization of the tx buffer pointer is done adding scan_bytes to the beginning of the rx buffer, but since the rx buffer is of type __be16 this will actually add two times as much and the tx buffer ends up pointing after the allocated buffer. Fix this by using scan_count, which is scan_bytes / 2, instead of scan_bytes when initializing the tx buffer pointer. Fixes: aacff892cbd5 ("staging:iio:adis: Preallocate transfer message") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> 
[ Upstream commit d590faf9e8f8509a0a0aa79c38e87fcc6b913248 ]

The SPI tx and rx buffers are both supposed to be scan_bytes amount of
bytes large and a common allocation is used to allocate both buffers. This
puts the beginning of the tx buffer scan_bytes bytes after the rx buffer.
The initialization of the tx buffer pointer is done adding scan_bytes to
the beginning of the rx buffer, but since the rx buffer is of type __be16
this will actually add two times as much and the tx buffer ends up pointing
after the allocated buffer.

Fix this by using scan_count, which is scan_bytes / 2, instead of
scan_bytes when initializing the tx buffer pointer.

Fixes: aacff892cbd5 ("staging:iio:adis: Preallocate transfer message")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
iio: st_accel: fix interrupt handling on LIS3LV02 2015-11-09T22:33:35+00:00 Linus Walleij linus.walleij@linaro.org 2015-09-02T19:02:58+00:00 49ffed3bf81c2da2ba1958df661d2f0580a2335c commit 61fd56309165d4790f99462d893b099f0b07312a upstream. This accelerometer accidentally either emits a DRDY signal or an IRQ signal. Accidentally I activated the IRQ signal as I thought it was analogous to the interrupt generator on other ST accelerometers. This was wrong. After this patch generic_buffer gives a nice stream of accelerometer readings. Fixes: 3acddf74f807778f "iio: st-sensors: add support for lis3lv02d accelerometer" Cc: Denis CIOCCA <denis.ciocca@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 61fd56309165d4790f99462d893b099f0b07312a upstream.

This accelerometer accidentally either emits a DRDY signal or an
IRQ signal. Accidentally I activated the IRQ signal as I thought
it was analogous to the interrupt generator on other ST
accelerometers. This was wrong. After this patch generic_buffer
gives a nice stream of accelerometer readings.

Fixes: 3acddf74f807778f "iio: st-sensors: add support for lis3lv02d accelerometer"
Cc: Denis CIOCCA <denis.ciocca@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iio: adis16480: Fix scale factors 2015-09-21T17:05:28+00:00 Lars-Peter Clausen lars@metafoo.de 2015-08-05T13:38:15+00:00 da4ecf32643639585af69bf5f0e5143198e43c39 commit 7abad1063deb0f77d275c61f58863ec319c58c5c upstream. The different devices support by the adis16480 driver have slightly different scales for the gyroscope and accelerometer channels. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7abad1063deb0f77d275c61f58863ec319c58c5c upstream.

The different devices support by the adis16480 driver have slightly
different scales for the gyroscope and accelerometer channels.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iio: adis16400: Fix adis16448 gyroscope scale 2015-09-21T17:05:28+00:00 Lars-Peter Clausen lars@metafoo.de 2015-08-05T13:38:13+00:00 dfc28f84d3d1d45bf2720362ee03420b8637d4ba commit 8166537283b31d7abaae9e56bd48fbbc30cdc579 upstream. Use the correct scale for the adis16448 gyroscope output. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8166537283b31d7abaae9e56bd48fbbc30cdc579 upstream.

Use the correct scale for the adis16448 gyroscope output.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iio: industrialio-buffer: Fix iio_buffer_poll return value 2015-09-21T17:05:27+00:00 Cristina Opriceana cristina.opriceana@gmail.com 2015-08-03T10:37:40+00:00 3f0ade6354d14d0efb7d344ea388a4d154fba03f commit 1bdc0293901cbea23c6dc29432e81919d4719844 upstream. Change return value to 0 if no device is bound since unsigned int cannot support negative error codes. Fixes: f18e7a068 ("iio: Return -ENODEV for file operations if the device has been unregistered") Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1bdc0293901cbea23c6dc29432e81919d4719844 upstream.

Change return value to 0 if no device is bound since
unsigned int cannot support negative error codes.

Fixes: f18e7a068 ("iio: Return -ENODEV for file operations if the
device has been unregistered")

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iio: event: Remove negative error code from iio_event_poll 2015-09-21T17:05:27+00:00 Cristina Opriceana cristina.opriceana@gmail.com 2015-08-03T10:00:47+00:00 ddf196ae809800281b5494b3cda7cbff0f89e4a3 commit 41d903c00051d8f31c98a8136edbac67e6f8688f upstream. Negative return values are not supported by iio_event_poll since its return type is unsigned int. Fixes: f18e7a068a0a3 ("iio: Return -ENODEV for file operations if the device has been unregistered") Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 41d903c00051d8f31c98a8136edbac67e6f8688f upstream.

Negative return values are not supported by iio_event_poll since
its return type is unsigned int.

Fixes: f18e7a068a0a3 ("iio: Return -ENODEV for file operations if the device has been unregistered")

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iio: bmg160: IIO_BUFFER and IIO_TRIGGERED_BUFFER are required 2015-09-21T17:05:27+00:00 Markus Pargmann mpa@pengutronix.de 2015-07-29T13:46:03+00:00 b78f553c856992967005427faf3cdc403578f863 commit 06d2f6ca5a38abe92f1f3a132b331eee773868c3 upstream. This patch adds selects for IIO_BUFFER and IIO_TRIGGERED_BUFFER. Without IIO_BUFFER, the driver does not compile. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 06d2f6ca5a38abe92f1f3a132b331eee773868c3 upstream.

This patch adds selects for IIO_BUFFER and IIO_TRIGGERED_BUFFER. Without
IIO_BUFFER, the driver does not compile.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>