linux-stable.git/drivers/iio, branch v3.16.2 Linux kernel stable tree iio:bma180: Missing check for frequency fractional part 2014-07-20T16:39:47+00:00 Peter Meerwald pmeerw@pmeerw.net 2014-07-16T18:32:00+00:00 9b2a4d35a6ceaf217be61ed8eb3c16986244f640 val2 should be zero This will make no difference for correct inputs but will reject incorrect ones with a decimal part in the value written to the sysfs interface. Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Stable@vger.kernel.org 
val2 should be zero

This will make no difference for correct inputs but will reject
incorrect ones with a decimal part in the value written to the sysfs
interface.

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Cc: Stable@vger.kernel.org
iio:bma180: Fix scale factors to report correct acceleration units 2014-07-20T16:38:39+00:00 Peter Meerwald pmeerw@pmeerw.net 2014-07-16T18:32:00+00:00 381676d5e86596b11e22a62f196e192df6091373 The userspace interface for acceleration sensors is documented as using m/s^2 units [Documentation/ABI/testing/sysfs-bus-iio] The fullscale raw values for the BMA80 corresponds to -/+ 1, 1.5, 2, etc G depending on the selected mode. The scale table was converting to G rather than m/s^2. Change the scaling table to match the documented interface. See commit 71702e6e, iio: mma8452: Use correct acceleration units, for a related fix. Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Stable@vger.kernel.org 
The userspace interface for acceleration sensors is documented as using
m/s^2 units [Documentation/ABI/testing/sysfs-bus-iio]

The fullscale raw values for the BMA80 corresponds to -/+ 1, 1.5, 2, etc G
depending on the selected mode.

The scale table was converting to G rather than m/s^2.
Change the scaling table to match the documented interface.

See commit 71702e6e, iio: mma8452: Use correct acceleration units,
for a related fix.

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Cc: Stable@vger.kernel.org
iio: buffer: Fix demux table creation 2014-07-20T14:44:39+00:00 Lars-Peter Clausen lars@metafoo.de 2014-07-17T15:59:00+00:00 61bd55ce1667809f022be88da77db17add90ea4e When creating the demux table we need to iterate over the selected scan mask for the buffer to get the samples which should be copied to destination buffer. Right now the code uses the mask which contains all active channels, which means the demux table contains entries which causes it to copy all the samples from source to destination buffer one by one without doing any demuxing. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Stable@vger.kernel.org 
When creating the demux table we need to iterate over the selected scan mask for
the buffer to get the samples which should be copied to destination buffer.
Right now the code uses the mask which contains all active channels, which means
the demux table contains entries which causes it to copy all the samples from
source to destination buffer one by one without doing any demuxing.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Cc: Stable@vger.kernel.org
iio: mma8452: Use correct acceleration units. 2014-07-12T12:18:55+00:00 Martin Fuzzey mfuzzey@parkeon.com 2014-11-07T13:54:00+00:00 71702e6e52c8312f4c6797a9787d0f8b5656156f The userspace interface for acceleration sensors is documented as using m/s^2 units [Documentation/ABI/testing/sysfs-bus-iio] The fullscale raw value for the mma8452 (-2048) corresponds to -2G, -4G or -8G depending on the seleted mode. The scale table was converting to G rather than m/s^2. Change the scaling table to match the documented interface. Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: stable@vger.kernel.org 
The userspace interface for acceleration sensors is documented as using
m/s^2 units [Documentation/ABI/testing/sysfs-bus-iio]

The fullscale raw value for the mma8452 (-2048) corresponds to -2G, -4G or -8G
depending on the seleted mode.

The scale table was converting to G rather than m/s^2.
Change the scaling table to match the documented interface.

Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Cc: stable@vger.kernel.org
iio:core: Handle error when mask type is not separate 2014-07-11T20:17:56+00:00 Srinivas Pandruvada srinivas.pandruvada@linux.intel.com 2014-08-07T21:03:00+00:00 78b3321610bf920d7fceb1a0236faa881be0bcf3 When event spec is shared by multiple channels, which has definition for mask_shared_by_type, iio_device_register_eventset fails. For example: static const struct iio_event_spec iio_dummy_events[] = { { .type = IIO_EV_TYPE_THRESH, .dir = IIO_EV_DIR_RISING, .mask_separate = BIT(IIO_EV_INFO_ENABLE), .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE), }, { .type = IIO_EV_TYPE_THRESH, .dir = IIO_EV_DIR_FALLING, .mask_separate = BIT(IIO_EV_INFO_ENABLE),a .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE), } }; If two channels use this event spec, this will result in error. This change handles EBUSY error similar to iio_device_add_info_mask_type(). Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Stable@vger.kernel.org 
When event spec is shared by multiple channels, which has definition
for mask_shared_by_type, iio_device_register_eventset fails.

For example:
static const struct iio_event_spec iio_dummy_events[] = {
	{
		.type = IIO_EV_TYPE_THRESH,
		.dir = IIO_EV_DIR_RISING,
		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
		.mask_shared_by_type = BIT(IIO_EV_INFO_VALUE),
	}, {
		.type = IIO_EV_TYPE_THRESH,
		.dir = IIO_EV_DIR_FALLING,
		.mask_separate = BIT(IIO_EV_INFO_ENABLE),a
		.mask_shared_by_type = BIT(IIO_EV_INFO_VALUE),
	}
};

If two channels use this event spec, this will result in error.

This change handles EBUSY error similar to iio_device_add_info_mask_type().

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Cc: Stable@vger.kernel.org
iio: ti_am335x_adc: Fix: Use same step id at FIFOs both ends 2014-07-08T20:21:22+00:00 Jan Kardell jan.kardell@telliq.com 2014-11-06T22:18:00+00:00 baa3c65298c089a9014b4e523a14ec2885cca1bc Since AI lines could be selected at will (linux-3.11) the sending and receiving ends of the FIFO does not agree about what step is used for a line. It only works if the last lines are used, like 5,6,7, and fails if ie 2,4,6 is selected in DT. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Tested-by: Zubair Lutfullah <zubair.lutfullah@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: stable@vger.kernel.org 
Since AI lines could be selected at will (linux-3.11) the sending
and receiving ends of the FIFO does not agree about what step is used
for a line. It only works if the last lines are used, like 5,6,7,
and fails if ie 2,4,6 is selected in DT.

Signed-off-by: Jan Kardell <jan.kardell@telliq.com>
Tested-by: Zubair Lutfullah <zubair.lutfullah@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Cc: stable@vger.kernel.org
iio:tcs3472: Check for buffer enabled and locking 2014-07-07T07:59:16+00:00 Peter Meerwald p.meerwald@bct-electronic.com 2014-05-07T12:38:00+00:00 2a58b4f88e3e51619916e9d090cbd1bb8d12b632 Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio: hid-sensor-prox: Fix return values 2014-07-05T10:09:46+00:00 Sachin Kamat sachin.kamat@samsung.com 2014-03-07T07:44:00+00:00 4ff9f633c35e2d94eb92f92c48ae0d9172242889 IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored the actual return values (which could be -EINVAL) and instead returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO upon success. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 
IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored
the actual return values (which could be -EINVAL) and instead
returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value
obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO
upon success.

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio: hid-sensor-gyro-3d: Fix return values 2014-07-05T10:07:58+00:00 Sachin Kamat sachin.kamat@samsung.com 2014-03-07T07:44:00+00:00 27793803f2ea876799cc44e05bb28d34b34a3869 IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored the actual return values (which could be -EINVAL) and instead returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO upon success. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 
IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored
the actual return values (which could be -EINVAL) and instead
returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value
obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO
upon success.

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
iio: hid-sensor-als: Fix return values 2014-07-05T10:07:38+00:00 Sachin Kamat sachin.kamat@samsung.com 2014-03-07T07:44:00+00:00 5d24b0b37bd5229227d0271c58b15aeb52e9c966 IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored the actual return values (which could be -EINVAL) and instead returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO upon success. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 
IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored
the actual return values (which could be -EINVAL) and instead
returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value
obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO
upon success.

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>