Refactor the driver to use the regmap API. Replace the driver-specific mutex and manual shadow buffers with the standard regmap infrastructure for locking and caching. This ensures the cache is populated from hardware at probe, preventing state desynchronization (e.g. across suspend/resume). Define access tables to validate the different register maps of DS44x2 and DS44x4. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Sander Vanheule <sander@svanheule.net> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for the MAX22007 4 channel DAC that drives a voltage or current output on each channel. Signed-off-by: Janani Sunil <janani.sunil@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is the iio driver for Microchip MCP47F(E/V)B(0/1/2)1, MCP47F(E/V)B(0/1/2)2, MCP47F(E/V)B(0/1/2)4 and MCP47F(E/V)B(0/1/2)8 series of buffered voltage output Digital-to-Analog Converters with nonvolatile or volatile memory and an I2C Interface. The families support up to 8 output channels. The devices can be 8-bit, 10-bit and 12-bit. Signed-off-by: Ariana Lazar <ariana.lazar@microchip.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Properly separate the I2C and SPI drivers into two different drivers living in their own source file (as usual). So that no need for the hacky ifdefery. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The AD3530/AD3530R (8-channel) and AD3531/AD3531R (4-channel) are low-power, 16-bit, buffered voltage output DACs with software- programmable gain controls, providing full-scale output spans of 2.5V or 5V for reference voltages of 2.5V. These devices operate from a single 2.7V to 5.5V supply and are guaranteed monotonic by design. The "R" variants include a 2.5V, 5ppm/°C internal reference, which is disabled by default. Support for monitoring internal die temperature, output voltages, and current of a selected channel via the MUXOUT pin using an external ADC is currently not implemented. Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://patch.msgid.link/20250429-togreg-v7-3-0af9c543b545@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add SPI offload support to stream TX buffers using DMA. This allows loading samples to the DAC with a rate of 1 MSPS. Signed-off-by: Axel Haslam <ahaslam@baylibre.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250207-dlech-mainline-spi-engine-offload-2-v8-17-e48a489be48c@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ROHM BD79703 is a 6 channel digital to analog converter. Based on the data-sheet examples the hardware would support setting the DAC word without changing the actual output. The data-sheet is not too specific on how the enabling the output of new voltage set by DAC should be done - hence this is not implemented by the driver. The BD79703 would also support two specific "PULL_DOWN" modes. These aren't currently supported by the driver either. Add a very basic support for controlling the channel outputs one-by-one. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://patch.msgid.link/bc77d7b979ca28408a216f597082fcd94ec63be7.1734608215.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Correct the converters typo error "convertors" => "converters" Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com> Link: https://patch.msgid.link/20241111-dackconfigcodespell-v1-1-2498567be34c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Merge v6.12-rc6 via char-misc-next to get some fixes needed for next few patches in IIO.
We need the char/misc/iio fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>