linux-stable.git/drivers/iio/common, branch linux-6.14.y Linux kernel stable tree iio: hid-sensor-prox: support multi-channel SCALE calculation 2025-05-18T06:26:02+00:00 Zhang Lixu lixu.zhang@intel.com 2025-03-31T05:50:21+00:00 09c6d74422581ab9ff0da160df2f936f2c9891ae commit 8b518cdb03f5f6e06d635cbfd9583d1fdbb39bfd upstream. With the introduction of multi-channel support in commit 596ef5cf654b ("iio: hid-sensor-prox: Add support for more channels"), each channel requires an independent SCALE calculation, but the existing code only calculates SCALE for a single channel. Addresses the problem by modifying the driver to perform independent SCALE calculations for each channel. Cc: stable@vger.kernel.org Fixes: 596ef5cf654b ("iio: hid-sensor-prox: Add support for more channels") Signed-off-by: Zhang Lixu <lixu.zhang@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://patch.msgid.link/20250331055022.1149736-3-lixu.zhang@intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8b518cdb03f5f6e06d635cbfd9583d1fdbb39bfd upstream.

With the introduction of multi-channel support in commit 596ef5cf654b
("iio: hid-sensor-prox: Add support for more channels"), each channel
requires an independent SCALE calculation, but the existing code only
calculates SCALE for a single channel.

Addresses the problem by modifying the driver to perform independent
SCALE calculations for each channel.

Cc: stable@vger.kernel.org
Fixes: 596ef5cf654b ("iio: hid-sensor-prox: Add support for more channels")
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250331055022.1149736-3-lixu.zhang@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iio: common: ssp_sensors: drop conditional optimization for simplicity 2024-12-28T14:28:13+00:00 Vasileios Amoiridis vassilisamir@gmail.com 2024-12-14T19:14:20+00:00 6d0981f964768f05f812db732465936d92a4a461 Drop conditional in favor of always calculating the timestamp value. This simplifies the code and allows to drop usage of internal private variable "scan_timestamp" of the struct iio_dev. Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com> Link: https://patch.msgid.link/20241214191421.94172-4-vassilisamir@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
Drop conditional in favor of always calculating the timestamp value.
This simplifies the code and allows to drop usage of internal private
variable "scan_timestamp" of the struct iio_dev.

Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241214191421.94172-4-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
iio: invensense: Prevent possible integer overflow while multiplication 2024-12-07T17:11:01+00:00 Karan Sanghavi karansanghvi98@gmail.com 2024-11-03T08:43:14+00:00 6dfc256151e842fa894a2b579f9a4551c6961e2c Typecast a variable to int64_t for 64-bit arithmetic multiplication. Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com> Link: https://scan7.scan.coverity.com/#/project-view/51946/11354?selectedIssue=1586045 Link: https://patch.msgid.link/20241103-coverity1586045integeroverflow-v1-1-43ea37a3f3cd@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
Typecast a variable to int64_t for 64-bit arithmetic multiplication.

Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com>
Link: https://scan7.scan.coverity.com/#/project-view/51946/11354?selectedIssue=1586045
Link: https://patch.msgid.link/20241103-coverity1586045integeroverflow-v1-1-43ea37a3f3cd@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
module: Convert symbol namespace to string literal 2024-12-02T19:34:44+00:00 Peter Zijlstra peterz@infradead.org 2024-12-02T14:59:47+00:00 cdd30ebb1b9f36159d66f088b61aee264e649d7a Clean up the existing export namespace code along the same lines of commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") and for the same reason, it is not desired for the namespace argument to be a macro expansion itself. Scripted using git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file; do awk -i inplace ' /^#define EXPORT_SYMBOL_NS/ { gsub(/__stringify\(ns\)/, "ns"); print; next; } /^#define MODULE_IMPORT_NS/ { gsub(/__stringify\(ns\)/, "ns"); print; next; } /MODULE_IMPORT_NS/ { $0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g"); } /EXPORT_SYMBOL_NS/ { if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) { if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ && $0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ && $0 !~ /^my/) { getline line; gsub(/[[:space:]]*\\$/, ""); gsub(/[[:space:]]/, "", line); $0 = $0 " " line; } $0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/, "\\1(\\2, \"\\3\")", "g"); } } { print }' $file; done Requested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc Acked-by: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.

Scripted using

  git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
  do
    awk -i inplace '
      /^#define EXPORT_SYMBOL_NS/ {
        gsub(/__stringify\(ns\)/, "ns");
        print;
        next;
      }
      /^#define MODULE_IMPORT_NS/ {
        gsub(/__stringify\(ns\)/, "ns");
        print;
        next;
      }
      /MODULE_IMPORT_NS/ {
        $0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
      }
      /EXPORT_SYMBOL_NS/ {
        if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
  	if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
  	    $0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
  	    $0 !~ /^my/) {
  	  getline line;
  	  gsub(/[[:space:]]*\\$/, "");
  	  gsub(/[[:space:]]/, "", line);
  	  $0 = $0 " " line;
  	}

  	$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
  		    "\\1(\\2, \"\\3\")", "g");
        }
      }
      { print }' $file;
  done

Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'iio-fixes-for-6.12c' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next 2024-11-08T15:46:34+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2024-11-08T15:46:34+00:00 389c4245f5491e343b1dd07d65923ac372679037 Jonathan writes: IIO: 3rd set of fixes for the 6.12 cycle Usual mixed bag of new issues from this cycle and ancient bugs recently noticed. core - Fix wrong fwnode handle if __fwnode_iio_channel_get_by_name() looks at parents of the provider node. core,backend - Fix a wrong pointer error check. gts library - Fix plausible corner case where the value returned was not set. - Avoid near infinite loop if the size of the table is 0. (neither are an issue for current drivers). adi,ad4000 - Fix reading of unsigned channels that were returning garbage. adi,ad7780 - Prevent a division by zero. adi,ad7923 - Fix buffer overflows in arrays that were not resized when devices with more channels were added to the driver. adi,adxl380 - Check only for negative error codes rather than including the positive channel read values in an error check. invense,common - Fix an issue where changing the sampling rate to another value and back again whilst the FIFO was off would not update things correctly. kionix,kx022a - Fix failure to sign extend value read from device. * tag 'iio-fixes-for-6.12c' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: Fix fwnode_handle in __fwnode_iio_channel_get_by_name() iio: accel: adxl380: fix raw sample read iio: accel: kx022a: Fix raw read format iio: gts: fix infinite loop for gain_to_scaletables() iio: gts: Fix uninitialized symbol 'ret' iio: adc: ad4000: fix reading unsigned data ad7780: fix division by zero in ad7780_write_raw() iio: adc: ad7923: Fix buffer overflow for tx_buf and ring_xfer iio: backend: fix wrong pointer passed to IS_ERR() iio: invensense: fix multiple odr switch when FIFO is off 
Jonathan writes:

IIO: 3rd set of fixes for the 6.12 cycle

Usual mixed bag of new issues from this cycle and ancient bugs
recently noticed.

core
- Fix wrong fwnode handle if __fwnode_iio_channel_get_by_name()
  looks at parents of the provider node.
core,backend
- Fix a wrong pointer error check.
gts library
- Fix plausible corner case where the value returned was not set.
- Avoid near infinite loop if the size of the table is 0.
  (neither are an issue for current drivers).
adi,ad4000
- Fix reading of unsigned channels that were returning garbage.
adi,ad7780
- Prevent a division by zero.
adi,ad7923
- Fix buffer overflows in arrays that were not resized when devices
  with more channels were added to the driver.
adi,adxl380
- Check only for negative error codes rather than including the
  positive channel read values in an error check.
invense,common
- Fix an issue where changing the sampling rate to another value and
  back again whilst the FIFO was off would not update things correctly.
kionix,kx022a
- Fix failure to sign extend value read from device.

* tag 'iio-fixes-for-6.12c' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: Fix fwnode_handle in __fwnode_iio_channel_get_by_name()
  iio: accel: adxl380: fix raw sample read
  iio: accel: kx022a: Fix raw read format
  iio: gts: fix infinite loop for gain_to_scaletables()
  iio: gts: Fix uninitialized symbol 'ret'
  iio: adc: ad4000: fix reading unsigned data
  ad7780: fix division by zero in ad7780_write_raw()
  iio: adc: ad7923: Fix buffer overflow for tx_buf and ring_xfer
  iio: backend: fix wrong pointer passed to IS_ERR()
  iio: invensense: fix multiple odr switch when FIFO is off
iio: invensense: fix multiple odr switch when FIFO is off 2024-10-29T20:59:49+00:00 Jean-Baptiste Maneyrol jean-baptiste.maneyrol@tdk.com 2024-10-21T08:38:42+00:00 ef5f5e7b6f73f79538892a8be3a3bee2342acc9f When multiple ODR switch happens during FIFO off, the change could not be taken into account if you get back to previous FIFO on value. For example, if you run sensor buffer at 50Hz, stop, change to 200Hz, then back to 50Hz and restart buffer, data will be timestamped at 200Hz. This due to testing against mult and not new_mult. To prevent this, let's just run apply_odr automatically when FIFO is off. It will also simplify driver code. Update inv_mpu6050 and inv_icm42600 to delete now useless apply_odr. Fixes: 95444b9eeb8c ("iio: invensense: fix odr switching to same value") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://patch.msgid.link/20241021-invn-inv-sensors-timestamp-fix-switch-fifo-off-v2-1-39ffd43edcc4@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
When multiple ODR switch happens during FIFO off, the change could
not be taken into account if you get back to previous FIFO on value.
For example, if you run sensor buffer at 50Hz, stop, change to
200Hz, then back to 50Hz and restart buffer, data will be timestamped
at 200Hz. This due to testing against mult and not new_mult.

To prevent this, let's just run apply_odr automatically when FIFO is
off. It will also simplify driver code.

Update inv_mpu6050 and inv_icm42600 to delete now useless apply_odr.

Fixes: 95444b9eeb8c ("iio: invensense: fix odr switching to same value")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://patch.msgid.link/20241021-invn-inv-sensors-timestamp-fix-switch-fifo-off-v2-1-39ffd43edcc4@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Merge 6.12-rc4 into char-misc-next 2024-10-21T06:42:22+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2024-10-21T06:42:22+00:00 d723c456ef5ad60d368e62791004fd152c4380aa We need the iio fixes from 6.12-rc4 in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
We need the iio fixes from 6.12-rc4 in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'iio-fixes-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus 2024-10-13T15:23:47+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2024-10-13T15:23:47+00:00 7528cb0f65d7472c1d6b96956f86b408c5ab6b11 Jonathan writes: IIO: 1st set of fixes for the 6.12 cycle. Most of this pull request is the result of Javier Carrasco doing a careful audit for missing Kconfig dependencies that luck has meant the random builds have never hit. The rest is the usual mix of old bugs that have surfaced and some fallout from the recent merge window. adi,ad5686 - Fix binding duplication of compatible strings. bosch,bma400 - Fix an uninitialized variable in the event tap handling. bosch,bmi323 - Fix several issues in the register saving and restore on suspend/resume sensiron,spd500 - Fix missing CRC8 dependency ti,op3001 - Fix a missing full-scale range value (values above this point were all reported wrongly) vishay,veml6030 - Fix a segmentation fault due to some type confusion. - Fix wrong ambient light sensor resolution. * tag 'iio-fixes-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (34 commits) iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig iio: frequency: {admv4420,adrf6780}: format Kconfig entries iio: adc: ad4695: Add missing Kconfig select iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency() iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config() iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig iio: resolver: ad2s1210: add missing select (TRIGGERED_)BUFFER in Kconfig iio: resolver: ad2s1210 add missing select REGMAP in Kconfig iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: pressure: bm1390: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: magnetometer: af8133j: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: light: bu27008: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: chemical: ens160: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: dac: ad5766: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig iio: dac: ad3552r: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig ... 
Jonathan writes:

IIO: 1st set of fixes for the 6.12 cycle.

Most of this pull request is the result of Javier Carrasco doing a
careful audit for missing Kconfig dependencies that luck has meant
the random builds have never hit. The rest is the usual mix of old
bugs that have surfaced and some fallout from the recent merge window.

adi,ad5686
 - Fix binding duplication of compatible strings.
bosch,bma400
 - Fix an uninitialized variable in the event tap handling.
bosch,bmi323
 - Fix several issues in the register saving and restore on suspend/resume
sensiron,spd500
 - Fix missing CRC8 dependency
ti,op3001
 - Fix a missing full-scale range value (values above this point were
   all reported wrongly)
vishay,veml6030
 - Fix a segmentation fault due to some type confusion.
 - Fix wrong ambient light sensor resolution.

* tag 'iio-fixes-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (34 commits)
  iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig
  iio: frequency: {admv4420,adrf6780}: format Kconfig entries
  iio: adc: ad4695: Add missing Kconfig select
  iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
  iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency()
  iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config()
  iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig
  iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig
  iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig
  iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig
  iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig
  iio: resolver: ad2s1210: add missing select (TRIGGERED_)BUFFER in Kconfig
  iio: resolver: ad2s1210 add missing select REGMAP in Kconfig
  iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
  iio: pressure: bm1390: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
  iio: magnetometer: af8133j: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
  iio: light: bu27008: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
  iio: chemical: ens160: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
  iio: dac: ad5766: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
  iio: dac: ad3552r: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
  ...
Merge tag 'v6.12-rc2' into test2 2024-10-12T10:43:29+00:00 Jonathan Cameron Jonathan.Cameron@huawei.com 2024-10-12T10:22:25+00:00 220c71dafaa28cbb75fd785670cf68a758347026 Linux 6.12-rc2 Resolved movement of asm/unaligned.h to linux/unaligned.h 
Linux 6.12-rc2

Resolved movement of asm/unaligned.h to linux/unaligned.h
iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency() 2024-10-10T17:50:30+00:00 Christophe JAILLET christophe.jaillet@wanadoo.fr 2024-10-03T18:41:12+00:00 3a29b84cf7fbf912a6ab1b9c886746f02b74ea25 If hid_sensor_set_report_latency() fails, the error code should be returned instead of a value likely to be interpreted as 'success'. Fixes: 138bc7969c24 ("iio: hid-sensor-hub: Implement batch mode") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://patch.msgid.link/c50640665f091a04086e5092cf50f73f2055107a.1727980825.git.christophe.jaillet@wanadoo.fr Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
If hid_sensor_set_report_latency() fails, the error code should be returned
instead of a value likely to be interpreted as 'success'.

Fixes: 138bc7969c24 ("iio: hid-sensor-hub: Implement batch mode")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/c50640665f091a04086e5092cf50f73f2055107a.1727980825.git.christophe.jaillet@wanadoo.fr
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>