[ Upstream commit 3bec247474469f769af41e8c80d3a100dd97dd76 ]

In function _hid_sensor_power_state(), when hid_sensor_read_poll_value()
is called, sensor's all properties will be updated by the value from
sensor hardware/firmware.
In some implementation, sensor hardware/firmware will do a power cycle
during S3. In this case, after resume, once hid_sensor_read_poll_value()
is called, sensor's all properties which are kept by driver during S3
will be changed to default value.
But instead, if a set feature function is called first, sensor
hardware/firmware will be recovered to the last status. So change the
sensor_hub_set_feature() calling order to behind of set feature function
to avoid sensor properties lose.

Signed-off-by: Song Hongyan <hongyan.song@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>

[ Upstream commit f1664eaacec31035450132c46ed2915fd2b2049a ]

It has been reported for a while that with iio-sensor-proxy service the
rotation only works after one suspend/resume cycle. This required a wait
in the systemd unit file to avoid race. I found a Yoga 900 where I could
reproduce this.

The problem scenerio is:
- During sensor driver init, enable run time PM and also set a
  auto-suspend for 3 seconds.
	This result in one runtime resume. But there is a check to avoid
a powerup in this sequence, but rpm is active
- User space iio-sensor-proxy tries to power up the sensor. Since rpm is
  active it will simply return. But sensors were not actually
powered up in the prior sequence, so actaully the sensors will not work
- After 3 seconds the auto suspend kicks

If we add a wait in systemd service file to fire iio-sensor-proxy after
3 seconds, then now everything will work as the runtime resume will
actually powerup the sensor as this is a user request.

To avoid this:
- Remove the check to match user requested state, this will cause a
  brief powerup, but if the iio-sensor-proxy starts immediately it will
still work as the sensors are ON.
- Also move the autosuspend delay to place when user requested turn off
  of sensors, like after user finished raw read or buffer disable

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

commit 1e25aa9641e8f3fa39cd5e46b4afcafd7f12a44b upstream.

By default all the sensors are runtime suspended state (lowest power
state). During Linux suspend process, all the run time suspended
devices are resumed and then suspended. This caused all sensors to
power up and introduced delay in suspend time, when we introduced
runtime PM for HID sensors. The opposite process happens during resume
process.

To fix this, we do powerup process of the sensors only when the request
is issued from user (raw or tiggerred). In this way when runtime,
resume calls for powerup it will simply return as this will not match
user requested state.

Note this is a regression fix as the increase in suspend / resume
times can be substantial (report of 8 seconds on Len's laptop!)

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Len Brown <len.brown@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Jonathan writes:

The usual mixed bag of fixes for IIO in the 4.1 cycle.

Second version of this pull request as a small fix to a fix turned
up before Greg pulled it for a cc10001 patch near the top of the tree.

One core fix

* Set updated for a iio kfifo was incorrectly set to false during a failed
  update, resulting in atttempts to repeat the failed operation appearing
  to succeed.

This time I've decided to list the driver fixes in alphabetical order rather
than 'randomly'.

* axp288_adc - a recent change added a check for valid info masks when
  reading channels from consumer drivers.
* bmp280 - temperature compensation was failing to read the tfine value, hence
  causing a temperature of 0 to always be returned and incorrect presure
  measurements.
* cc10001 - Fix channel number mapping when some channels are reserved for
  remote CPUs. Fix an issue with the use of the power-up/power-down register
  (basically wrong polarity). Fix an issue due to the missinterpretting the
  return value from regulator_get_voltage. Add a delay before the start bit
  as recommended for the hardware to avoid data corruption.
* hid pressure - fix channel spec of modfiied, but no modifier (which makes no
  sense!)
* hid proximity - fix channel spec of modified, but no modifier (which makes
  no sense!). Fix a memory leak in the probe function.
* mcp320x - occasional incorrect readings on dma using spi busses due to
  cacheline corruption. Fixed by forcing ___cacheline_aligned for the buffers.
* mma9551 - buffer overrun fix (miss specified maximum length of buffers)
* mma9553 - endian fix on status message. Add an enable element for activity
  channel. Input checking for activity period to avoid rather unpredictable
  results.
* spmi-vadc - fix an overflow in the output value normalization seen on some
  boards.
* st-snesors - oops due to use of a mutex that is not yet initialized during
  probe.
* xilinx adc - Some wrong register addresses, a wrong address for vccaux
  channel, incorrect scale on VREFP and incorrect sign on VREFN.

In SPI mode the transfer buffer is locked with a mutex. However this
mutex is only initilized after the probe, but some transfer needs to
be done in the probe.

To fix this bug we move the mutex initialization at the beginning of
the device probe.

Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Pull HID updates from Jiri Kosina:

 - quite a few firmware fixes for RMI driver by Andrew Duggan

 - huion and uclogic drivers have been substantially overlaping in
   functionality laterly.  This redundancy is fixed by hid-huion driver
   being merged into hid-uclogic; work done by Benjamin Tissoires and
   Nikolai Kondrashov

 - i2c-hid now supports ACPI GPIO interrupts; patch from Mika Westerberg

 - Some of the quirks, that got separated into individual drivers, have
   historically had EXPERT dependency.  As HID subsystem matured (as
   well as the individual drivers), this made less and less sense.  This
   dependency is now being removed by patch from Jean Delvare

 - Logitech lg4ff driver received a couple of improvements for mode
   switching, by Michal Malý

 - multitouch driver now supports clickpads, patches by Benjamin
   Tissoires and Seth Forshee

 - hid-sensor framework received a substantial update; namely support
   for Custom and Generic pages is being added; work done by Srinivas
   Pandruvada

 - wacom driver received substantial update; it now supports
   i2c-conntected devices (Mika Westerberg), Bamboo PADs are now
   properly supported (Benjamin Tissoires), much improved battery
   reporting (Jason Gerecke) and pen proximity cleanups (Ping Cheng)

 - small assorted fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits)
  HID: sensor: Update document for custom sensor
  HID: sensor: Custom and Generic sensor support
  HID: debug: fix error handling in hid_debug_events_read()
  Input - mt: Fix input_mt_get_slot_by_key
  HID: logitech-hidpp: fix error return code
  HID: wacom: Add support for Cintiq 13HD Touch
  HID: logitech-hidpp: add a module parameter to keep firmware gestures
  HID: usbhid: yet another mouse with ALWAYS_POLL
  HID: usbhid: more mice with ALWAYS_POLL
  HID: wacom: set stylus_in_proximity before checking touch_down
  HID: wacom: use wacom_wac_finger_count_touches to set touch_down
  HID: wacom: remove hardcoded WACOM_QUIRK_MULTI_INPUT
  HID: pidff: effect can't be NULL
  HID: add quirk for PIXART OEM mouse used by HP
  HID: add HP OEM mouse to quirk ALWAYS_POLL
  HID: wacom: ask for a in-prox report when it was missed
  HID: hid-sensor-hub: Fix sparse warning
  HID: hid-sensor-hub: fix attribute read for logical usage id
  HID: plantronics: fix Kconfig default
  HID: pidff: support more than one concurrent effect
  ...

Conflicts:
	drivers/iio/common/hid-sensors/hid-sensor-trigger.c
	include/linux/hid-sensor-hub.h

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Current API only allows setting one offset in the field. This API
is extended to set multiple offsets in the field report.
Also update parameters in the users of this API.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Some hid sensor feature report can contain more than one reports.
This API can now support receiving multiple values from the feature
report.
Also update the parameters in the users of this API.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>