Add 'unsigned long dev_flags' to ide_drive_t and convert bitfields
to IDE_DFLAG_* flags.

While at it:
- IDE_DFLAG_ADDRESSING -> IDE_DFLAG_LBA48
- fixup some comments
- remove needless g->flags zeroing from ide*_probe()

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Include <linux/ata.h> directly in <linux/ide.h>
  instead of through <linux/hdreg.h>.

* Include <linux/hdreg.h> only when needed.

Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* ERR_STAT   -> ATA_ERR
* INDEX_STAT -> ATA_IDX
* ECC_STAT   -> ATA_CORR
* DRQ_STAT   -> ATA_DRQ
* SEEK_STAT  -> ATA_DSC
* WRERR_STAT -> ATA_DF
* READY_STAT -> ATA_DRDY
* BUSY_STAT  -> ATA_BUSY

* MARK_ERR   -> ATA_AMNF
* TRK0_ERR   -> ATA_TRK0NF
* ABRT_ERR   -> ATA_ABORTED
* MCR_ERR    -> ATA_MCR
* ID_ERR     -> ATA_IDNF
* MC_ERR     -> ATA_MC
* ECC_ERR    -> ATA_UNC
* ICRC_ERR   -> ATA_ICRC

* BBD_ERR    -> ATA_BBK

Also:

* ILI_ERR    -> ATAPI_ILI
* EOM_ERR    -> ATAPI_EOM
* LFS_ERR    -> ATAPI_LFS

* CD         -> ATAPI_COD
* IO         -> ATAPI_IO

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Factor out HDIO_[OBSOLETE,GET]_IDENTITY ioctls handling
  to ide_get_identity_ioctl().

* Use temporary buffer in ide_get_identity_ioctl() instead
  of accessing drive->id directly.

* Add ide_id_to_hd_driveid() inline to convert raw id into
  struct hd_driveid format (needed on big-endian).

* Use ide_id_to_hd_driveid() in ide_get_identity_ioctl(),
  cleanup ide_fix_driveid() and switch ide to use use raw id.

* Remove no longer needed drive->driveid.

  This leaves us with 3 users of struct hd_driveid in tree:
  - arch/um/drivers/ubd_kern.c
  - drivers/block/xsysace.c
  - drivers/usb/storage/isd200.c

While at it:

* Use ata_id_u{32,64}() and ata_id_has_{dma,lba,iordy}() macros.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Make drive->id an unnamed union so id can be accessed either by using
'u16 *id' or 'struct hd_driveid *driveid'.  Then convert all existing
drive->id users accordingly (using 'u16 *id' when possible).

This is an intermediate step to make ide 'struct hd_driveid'-free.

While at it:

- Add missing KERN_CONTs in it821x.c.

- Use ATA_ID_WORDS and ATA_ID_*_LEN defines.

- Remove unnecessary checks for drive->id.

- s/drive_table/table/ in ide_in_drive_list().

- Cleanup ide_config_drive_speed() a bit.

- s/drive1/dev1/ & s/drive0/dev0/ in ide_undecoded_slave().

v2:
Fix typo in drivers/ide/ppc/pmac.c. (From Stephen Rothwell)

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add struct ide_tp_ops for transport methods.

* Add 'const struct ide_tp_ops *tp_ops' to struct ide_port_info
  and ide_hwif_t.

* Set the default hwif->tp_ops in ide_init_port_data().

* Set host driver specific hwif->tp_ops in ide_init_port().

* Export ide_exec_command(), ide_read_status(), ide_read_altstatus(),
  ide_read_sff_dma_status(), ide_set_irq(), ide_tf_{load,read}()
  and ata_{in,out}put_data().

* Convert host drivers and core code to use struct ide_tp_ops.

* Remove no longer needed default_hwif_transport().

* Cleanup ide_hwif_t from methods that are now in struct ide_tp_ops.

While at it:

* Use struct ide_port_info in falconide.c and q40ide.c.

* Rename ata_{in,out}put_data() to ide_{in,out}put_data().

v2:

* Fix missing convertion in ns87415.c.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Filter out "default" transfer mode values (0x00 - default PIO mode,
  0x01 - default PIO mode w/ IORDY disabled) in write handler for obsoleted
  /proc/ide/hd?/settings:current_speed setting.

  Allowing "default" transfer mode values is a dangerous thing to do as
  we don't support programming controller to the "default" transfer mode
  and devices often use different values for the default and maximum PIO
  mode (i.e. PIO2 default and PIO4 maximum) so the controller will stay
  programmed for higher PIO mode while device will use the lower PIO mode.

  There is no functionality loss as by using special IOCTLs device can
  still be programmed to "default" transfer modes (it is only useful for
  debugging/testing purposes anyway).

* Remove no longer needed IDE_HFLAG_ABUSE_SET_DMA_MODE host flag, it was
  previously used by few host drivers to program the controller to PIO0
  timings for "default" transfer mode == 0x01 (although some host drivers
  would program invalid PIO timings instead).

* Cleanup ide_set_xfer_rate() and add BUG_ON().

Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Move PIO blacklist to ide-pio-blacklist.c.

While at it:

- fix comment

- fix whitespace damage

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

All ide_pio_cycle_time() users already select CONFIG_IDE_TIMINGS
so move the function from ide-lib.c to ide-timings.c.

While at it:

- convert ide_pio_cycle_time() to use ide_timing_find_mode()

- cleanup ide_pio_cycle_time() a bit

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>