Make 'struct ide_taskfile' cover only 8 register values and thus put two such
fields ('tf' and 'hob') into 'struct ide_cmd', dropping unnecessary 'tf_array'
field from it.

This required changing the prototype of ide_get_lba_addr() and ide_tf_dump().

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
[bart: fix setting of ATA_LBA bit for LBA48 commands in __ide_do_rw_disk()]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Replace IDE_TFLAG_{IN|OUT}_* flags meaning to the taskfile register validity on
input/output by the IDE_VALID_* flags and introduce 4 symmetric 8-bit register
validity indicator subfields, 'valid.{input/output}.{tf|hob}', into the 'struct
ide_cmd' instead of using the 'tf_flags' field for that purpose (this field can
then be turned from 32-bit into 8-bit one).

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Make use of ATA_ERR instead of hard-coded value in idedisk_set_max_address()
and idedisk_read_native_max_address().

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Pass number of bytes instead of sectors to ide_init_sg_cmd().

* Pass number of bytes to process to ide_pio_sector() and rename
  it to ide_pio_bytes().

* Rename ->nsect field to ->nbytes in struct ide_cmd and use
  ->nbytes, ->nleft and ->cursg_ofs to keep track of number of
  bytes instead of sectors.

There should be no functional changes caused by this patch.

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Set IDE_TFLAG_WRITE flag and ->rq also for ATA_CMD_PACKET
  commands.

* Pass command to ->dma_setup method and update all its
  implementations accordingly.

* Pass command instead of request to ide_build_sglist(),
  *_build_dmatable() and ide_map_sg().

While at it:

* Fix scc_dma_setup() documentation + use ATA_DMA_WR define.

* Rename sgiioc4_build_dma_table() to sgiioc4_build_dmatable(),
  change return value type to 'int' and drop unused 'ddir'
  argument.

* Do some minor cleanups in [tx4939]ide_dma_setup().

There should be no functional changes caused by this patch.

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add ide_rq_bytes() helper.

* Add blk_noretry_request() quirk to ide_complete_rq() (currently only fs
  requests can be marked as "noretry" so there is no change in behavior).

* Switch current ide_end_request() users to use ide_complete_rq().

  [ No need to check for rq->nr_sectors == 0 in {ide_dma,task_pio}_intr(),
    nsectors == 0 in cdrom_end_request() and err == 0 in ide_do_devset(). ]

* Remove no longer needed ide_end_request().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Move rq->errors quirk out from ide_end_request() to its call sites.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add IDE_TFLAG_MULTI_PIO taskfile flag and set it for commands
  using multi-PIO protocol.

* Use ata_tf_protocols enums instead of TASKFILE_* defines to
  denote command's protocol and then rename ->data_phase field
  to ->protocol.

* Remove no longer needed <linux/hdreg.h> includes.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move command related fields from ide_hwif_t to struct ide_cmd.

* Make ide_init_sg_cmd() take command and sectors number as arguments.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add IDE_TFLAG_FS taskfile flag and set it for REQ_TYPE_FS requests.

* Convert ->{in,out}put_data methods to take command instead of request
  as an argument.  Then convert pre_task_out_intr(), task_end_request(),
  task_error(), task_in_unexpected(), ide_pio_sector(), ide_pio_multi()
  and ide_pio_datablock() in similar way.

* Rename task_end_request() to ide_finish_cmd().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>