linux-stable.git/drivers/i3c, branch v6.1.76 Linux kernel stable tree i3c: master: svc: fix random hot join failure since timeout error 2023-11-28T17:07:17+00:00 Frank Li Frank.Li@nxp.com 2023-10-23T16:16:58+00:00 e841a59ac1d89a75a7b7810c25a00f4b5f1b2e60 [ Upstream commit 9aaeef113c55248ecf3ab941c2e4460aaa8b8b9a ] master side report: silvaco-i3c-master 44330000.i3c-master: Error condition: MSTATUS 0x020090c7, MERRWARN 0x00100000 BIT 20: TIMEOUT error The module has stalled too long in a frame. This happens when: - The TX FIFO or RX FIFO is not handled and the bus is stuck in the middle of a message, - No STOP was issued and between messages, - IBI manual is used and no decision was made. The maximum stall period is 100 μs. This can be considered as being just a warning as the system IRQ latency can easily be greater than 100us. Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver") Cc: <stable@vger.kernel.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20231023161658.3890811-7-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 9aaeef113c55248ecf3ab941c2e4460aaa8b8b9a ]

master side report:
  silvaco-i3c-master 44330000.i3c-master: Error condition: MSTATUS 0x020090c7, MERRWARN 0x00100000

BIT 20: TIMEOUT error
  The module has stalled too long in a frame. This happens when:
  - The TX FIFO or RX FIFO is not handled and the bus is stuck in the
middle of a message,
  - No STOP was issued and between messages,
  - IBI manual is used and no decision was made.
  The maximum stall period is 100 μs.

This can be considered as being just a warning as the system IRQ latency
can easily be greater than 100us.

Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Cc:  <stable@vger.kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-7-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i3c: master: svc: add NACK check after start byte sent 2023-11-28T17:07:17+00:00 Clark Wang xiaoning.wang@nxp.com 2023-05-17T03:30:30+00:00 a807a44189d10934d3c6476ae2c99b310f148579 [ Upstream commit 49b472ebc61de3d4aa7cc57539246bb39f6c5128 ] Add NACK check after start byte is sent. It is possible to detect early that a device is not on the bus and avoid invalid transmissions thereafter. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230517033030.3068085-3-xiaoning.wang@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Stable-dep-of: 9aaeef113c55 ("i3c: master: svc: fix random hot join failure since timeout error") Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 49b472ebc61de3d4aa7cc57539246bb39f6c5128 ]

Add NACK check after start byte is sent.
It is possible to detect early that a device is not on the bus
and avoid invalid transmissions thereafter.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230517033030.3068085-3-xiaoning.wang@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 9aaeef113c55 ("i3c: master: svc: fix random hot join failure since timeout error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
i3c: master: svc: fix SDA keep low when polling IBIWON timeout happen 2023-11-28T17:07:14+00:00 Frank Li Frank.Li@nxp.com 2023-10-23T16:16:57+00:00 3ddb2fa5ec1c1d7bbadc0b70fccd06cfd1bea081 commit dfd7cd6aafdb1f5ba93828e97e56b38304b23a05 upstream. Upon IBIWON timeout, the SDA line will always be kept low if we don't emit a stop. Calling svc_i3c_master_emit_stop() there will let the bus return to idle state. Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver") Cc: <stable@vger.kernel.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20231023161658.3890811-6-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit dfd7cd6aafdb1f5ba93828e97e56b38304b23a05 upstream.

Upon IBIWON timeout, the SDA line will always be kept low if we don't emit
a stop. Calling svc_i3c_master_emit_stop() there will let the bus return to
idle state.

Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Cc:  <stable@vger.kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-6-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i3c: master: svc: fix check wrong status register in irq handler 2023-11-28T17:07:14+00:00 Frank Li Frank.Li@nxp.com 2023-10-23T16:16:56+00:00 1ea1fb22166266d05300db9708ffb2aea3a48c91 commit 225d5ef048c4ed01a475c95d94833bd7dd61072d upstream. svc_i3c_master_irq_handler() wrongly checks register SVC_I3C_MINTMASKED. It should be SVC_I3C_MSTATUS. Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver") Cc: <stable@vger.kernel.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20231023161658.3890811-5-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 225d5ef048c4ed01a475c95d94833bd7dd61072d upstream.

svc_i3c_master_irq_handler() wrongly checks register SVC_I3C_MINTMASKED. It
should be SVC_I3C_MSTATUS.

Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Cc:  <stable@vger.kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-5-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i3c: master: svc: fix ibi may not return mandatory data byte 2023-11-28T17:07:14+00:00 Frank Li Frank.Li@nxp.com 2023-10-23T16:16:55+00:00 65d9f61324fcdb43dc6fbdcc8b78ae0a05ceab5a commit c85e209b799f12d18a90ae6353b997b1bb1274a5 upstream. MSTATUS[RXPEND] is only updated after the data transfer cycle started. This creates an issue when the I3C clock is slow, and the CPU is running fast enough that MSTATUS[RXPEND] may not be updated when the code reaches checking point. As a result, mandatory data can be missed. Add a wait for MSTATUS[COMPLETE] to ensure that all mandatory data is already in FIFO. It also works without mandatory data. Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver") Cc: <stable@vger.kernel.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20231023161658.3890811-4-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c85e209b799f12d18a90ae6353b997b1bb1274a5 upstream.

MSTATUS[RXPEND] is only updated after the data transfer cycle started. This
creates an issue when the I3C clock is slow, and the CPU is running fast
enough that MSTATUS[RXPEND] may not be updated when the code reaches
checking point. As a result, mandatory data can be missed.

Add a wait for MSTATUS[COMPLETE] to ensure that all mandatory data is
already in FIFO. It also works without mandatory data.

Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Cc:  <stable@vger.kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-4-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i3c: master: svc: fix wrong data return when IBI happen during start frame 2023-11-28T17:07:14+00:00 Frank Li Frank.Li@nxp.com 2023-10-23T16:16:54+00:00 e32e9cba564e739d8ff2fafe066ef3c2e68bc811 commit 5e5e3c92e748a6d859190e123b9193cf4911fcca upstream. ┌─────┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┌───── SCL: ┘ └─────┛ └──┛ └──┛ └──┛ └──┛ └──┛ └──┛ └──┛ └──┘ ───┐ ┌─────┐ ┌─────┐ ┌───────────┐ SDA: └───────────────────────┘ └─────┘ └─────┘ └───── xxx╱ ╲╱ ╲╱ ╲╱ ╲╱ ╲ : xxx╲IBI ╱╲ Addr(0x0a) ╱╲ RW ╱╲NACK╱╲ S ╱ If an In-Band Interrupt (IBI) occurs and IBI work thread is not immediately scheduled, when svc_i3c_master_priv_xfers() initiates the I3C transfer and attempts to send address 0x7e, the target interprets it as an IBI handler and returns the target address 0x0a. However, svc_i3c_master_priv_xfers() does not handle this case and proceeds with other transfers, resulting in incorrect data being returned. Add IBIWON check in svc_i3c_master_xfer(). In case this situation occurs, return a failure to the driver. Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver") Cc: <stable@vger.kernel.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20231023161658.3890811-3-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5e5e3c92e748a6d859190e123b9193cf4911fcca upstream.

     ┌─────┐     ┏──┐  ┏──┐  ┏──┐  ┏──┐  ┏──┐  ┏──┐  ┏──┐  ┏──┐  ┌─────
SCL: ┘     └─────┛  └──┛  └──┛  └──┛  └──┛  └──┛  └──┛  └──┛  └──┘
     ───┐                       ┌─────┐     ┌─────┐     ┌───────────┐
SDA:    └───────────────────────┘     └─────┘     └─────┘           └─────
     xxx╱    ╲╱                                        ╲╱    ╲╱    ╲╱    ╲
   : xxx╲IBI ╱╲               Addr(0x0a)               ╱╲ RW ╱╲NACK╱╲ S  ╱

If an In-Band Interrupt (IBI) occurs and IBI work thread is not immediately
scheduled, when svc_i3c_master_priv_xfers() initiates the I3C transfer and
attempts to send address 0x7e, the target interprets it as an
IBI handler and returns the target address 0x0a.

However, svc_i3c_master_priv_xfers() does not handle this case and proceeds
with other transfers, resulting in incorrect data being returned.

Add IBIWON check in svc_i3c_master_xfer(). In case this situation occurs,
return a failure to the driver.

Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Cc:  <stable@vger.kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-3-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i3c: master: svc: fix race condition in ibi work thread 2023-11-28T17:07:14+00:00 Frank Li Frank.Li@nxp.com 2023-10-23T16:16:53+00:00 3a8e03f133c0b21656903ddeafa027c8e1574559 commit 6bf3fc268183816856c96b8794cd66146bc27b35 upstream. The ibi work thread operates asynchronously with other transfers, such as svc_i3c_master_priv_xfers(). Introduce mutex protection to ensure the completion of the entire i3c/i2c transaction. Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver") Cc: <stable@vger.kernel.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20231023161658.3890811-2-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6bf3fc268183816856c96b8794cd66146bc27b35 upstream.

The ibi work thread operates asynchronously with other transfers, such as
svc_i3c_master_priv_xfers(). Introduce mutex protection to ensure the
completion of the entire i3c/i2c transaction.

Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Cc:  <stable@vger.kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231023161658.3890811-2-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i3c: master: cdns: Fix reading status register 2023-11-28T17:07:14+00:00 Joshua Yeong joshua.yeong@starfivetech.com 2023-09-13T03:17:45+00:00 de6ca501addc3f108c1cc51bcd029d1895d4ea38 commit 4bd8405257da717cd556f99e5fb68693d12c9766 upstream. IBIR_DEPTH and CMDR_DEPTH should read from status0 instead of status1. Cc: stable@vger.kernel.org Fixes: 603f2bee2c54 ("i3c: master: Add driver for Cadence IP") Signed-off-by: Joshua Yeong <joshua.yeong@starfivetech.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230913031743.11439-2-joshua.yeong@starfivetech.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4bd8405257da717cd556f99e5fb68693d12c9766 upstream.

IBIR_DEPTH and CMDR_DEPTH should read from status0 instead of status1.

Cc: stable@vger.kernel.org
Fixes: 603f2bee2c54 ("i3c: master: Add driver for Cadence IP")
Signed-off-by: Joshua Yeong <joshua.yeong@starfivetech.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230913031743.11439-2-joshua.yeong@starfivetech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data. 2023-11-28T17:07:02+00:00 Billy Tsai billy_tsai@aspeedtech.com 2023-10-23T08:02:37+00:00 e64d23dc65810be4e3395d72df0c398f60c991f9 [ Upstream commit b53e9758a31c683fc8615df930262192ed5f034b ] The `i3c_master_bus_init` function may attach the I2C devices before the I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used before the DAT `init`. Additionally, if the `i3c_master_bus_init` fails, the DAT `cleanup` will execute before the device is detached, which will execue DAT `free_entry` function. The above scenario can cause the driver to use DAT_data when it is NULL. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20231023080237.560936-1-billy_tsai@aspeedtech.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b53e9758a31c683fc8615df930262192ed5f034b ]

The `i3c_master_bus_init` function may attach the I2C devices before the
I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used
before the DAT `init`. Additionally, if the `i3c_master_bus_init` fails,
the DAT `cleanup` will execute before the device is detached, which will
execue DAT `free_entry` function. The above scenario can cause the driver
to use DAT_data when it is NULL.

Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20231023080237.560936-1-billy_tsai@aspeedtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handler 2023-11-28T17:07:01+00:00 Jarkko Nikula jarkko.nikula@linux.intel.com 2023-09-21T05:56:56+00:00 8be39f66915b40d26ea2c18ba84b5c3d5da6809b [ Upstream commit 45a832f989e520095429589d5b01b0c65da9b574 ] Do not loop over ring headers in hci_dma_irq_handler() that are not allocated and enabled in hci_dma_init(). Otherwise out of bounds access will occur from rings->headers[i] access when i >= number of allocated ring headers. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20230921055704.1087277-5-jarkko.nikula@linux.intel.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 45a832f989e520095429589d5b01b0c65da9b574 ]

Do not loop over ring headers in hci_dma_irq_handler() that are not
allocated and enabled in hci_dma_init(). Otherwise out of bounds access
will occur from rings->headers[i] access when i >= number of allocated
ring headers.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20230921055704.1087277-5-jarkko.nikula@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>