linux-stable.git/drivers/i3c/master, branch linux-6.3.y Linux kernel stable tree i3c: master: dw: stop hardcoding initial speed 2023-02-28T22:54:49+00:00 Jack Chen zenghuchen@google.com 2023-02-16T15:10:57+00:00 510d2358c466bf6588034f0d3b2266eed2bc0a51 Bus-speed could be default(12.5MHz) or defined by users in dts. Dw-i3c-master should not hard-code the initial speed to be I3C_BUS_TYP_I3C_SCL_RATE (12.5MHz) And because of Synopsys's I3C controller limit (hcnt/lcnt register length) and core-clk provided, there is a limit to bus speed, too. For example, when core-clk is 250 MHz, the bus speed cannot be lowered below 1MHz. Tested: tested with an i3c sensor and captured with a logic analyzer. Signed-off-by: Jack Chen <zenghuchen@google.com> Link: https://lore.kernel.org/r/20230216151057.293764-1-zenghuchen@google.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> 
Bus-speed could be default(12.5MHz) or defined by users in dts.
Dw-i3c-master should not hard-code the initial speed to be
I3C_BUS_TYP_I3C_SCL_RATE (12.5MHz)
And because of Synopsys's I3C controller limit (hcnt/lcnt register
length) and core-clk provided, there is a limit to bus speed, too.
For example, when core-clk is 250 MHz, the bus speed cannot be
lowered below 1MHz.

Tested: tested with an i3c sensor and captured with a logic analyzer.

Signed-off-by: Jack Chen <zenghuchen@google.com>
Link: https://lore.kernel.org/r/20230216151057.293764-1-zenghuchen@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
i3c: master: svc: fix returnvar.cocci warning 2022-05-17T20:34:42+00:00 Guo Zhengkui guozhengkui@vivo.com 2022-05-04T16:49:01+00:00 227fab1ee7ca70c9b4b0915898e81327aeb70414 Fix the following coccicheck warning: drivers/i3c/master/svc-i3c-master.c:1600:5-8: Unneeded variable: "ret". Return "0" on line 1605. Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220504164901.9622-1-guozhengkui@vivo.com 
Fix the following coccicheck warning:

drivers/i3c/master/svc-i3c-master.c:1600:5-8:
Unneeded variable: "ret". Return "0" on line 1605.

Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220504164901.9622-1-guozhengkui@vivo.com
i3c/master: simplify the return expression of i3c_hci_remove() 2022-05-17T20:33:43+00:00 Minghao Chi chi.minghao@zte.com.cn 2022-05-05T02:19:54+00:00 c157a606e7525409208a51bd6663d6da3757d69e Simplify the return expression. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220505021954.54524-1-chi.minghao@zte.com.cn 
Simplify the return expression.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220505021954.54524-1-chi.minghao@zte.com.cn
i3c: master: dw: check return of dw_i3c_master_get_free_pos() 2022-01-13T01:05:50+00:00 Tom Rix trix@redhat.com 2022-01-08T15:09:48+00:00 13462ba1815db5a96891293a9cfaa2451f7bd623 Clang static analysis reports this problem dw-i3c-master.c:799:9: warning: The result of the left shift is undefined because the left operand is negative COMMAND_PORT_DEV_INDEX(pos) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ pos can be negative because dw_i3c_master_get_free_pos() can return an error. So check for an error. Fixes: 1dd728f5d4d4 ("i3c: master: Add driver for Synopsys DesignWare IP") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220108150948.3988790-1-trix@redhat.com 
Clang static analysis reports this problem
dw-i3c-master.c:799:9: warning: The result of the left shift is
  undefined because the left operand is negative
                      COMMAND_PORT_DEV_INDEX(pos) |
                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~

pos can be negative because dw_i3c_master_get_free_pos() can return an
error.  So check for an error.

Fixes: 1dd728f5d4d4 ("i3c: master: Add driver for Synopsys DesignWare IP")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220108150948.3988790-1-trix@redhat.com
i3c: master: mipi-i3c-hci: correct the config reference for endianness 2022-01-05T08:54:54+00:00 Lukas Bulwahn lukas.bulwahn@gmail.com 2022-01-03T09:45:04+00:00 7a2bccd1a27f0c8fc87e4ed56abd6ea9fa7314a6 The referred config BIG_ENDIAN does not exist. The config for the endianness of the CPU architecture is called CPU_BIG_ENDIAN. Correct the config name to the existing config for the endianness. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Nicolas Pitre <npitre@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220103094504.3602-1-lukas.bulwahn@gmail.com 
The referred config BIG_ENDIAN does not exist. The config for the
endianness of the CPU architecture is called CPU_BIG_ENDIAN.

Correct the config name to the existing config for the endianness.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220103094504.3602-1-lukas.bulwahn@gmail.com
i3c: master: svc: enable the interrupt in the enable ibi function 2022-01-05T08:53:44+00:00 Clark Wang xiaoning.wang@nxp.com 2021-12-27T07:45:29+00:00 7ff730ca458e841dbcdc87f264d7afe3eaed525e If enable interrupt in the svc_i3c_master_bus_init() but do not call enable ibi in the device driver, it will cause a kernel dump in the svc_i3c_master_handle_ibi() when a slave start occurs on the i3c bus, because the data->ibi_pool is not initialized. So only enable the interrupt in svc_i3c_master_enable_ibi() function. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-9-xiaoning.wang@nxp.com 
If enable interrupt in the svc_i3c_master_bus_init() but do not call
enable ibi in the device driver, it will cause a kernel dump in the
svc_i3c_master_handle_ibi() when a slave start occurs on the i3c bus,
because the data->ibi_pool is not initialized.
So only enable the interrupt in svc_i3c_master_enable_ibi() function.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211227074529.1660398-9-xiaoning.wang@nxp.com
i3c: master: svc: add the missing module device table 2022-01-05T08:53:44+00:00 Clark Wang xiaoning.wang@nxp.com 2021-12-27T07:45:28+00:00 c5d4587bb9a9a03b30bbc928b4a007fcd1f8c279 The missing MODULE_DEVICE_TABLE() will cause the svc-i3c-master cannot be auto probed when it is built in moudle. So add it. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-8-xiaoning.wang@nxp.com 
The missing MODULE_DEVICE_TABLE() will cause the svc-i3c-master cannot
be auto probed when it is built in moudle.
So add it.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211227074529.1660398-8-xiaoning.wang@nxp.com
i3c: master: svc: add runtime pm support 2022-01-05T08:53:44+00:00 Clark Wang xiaoning.wang@nxp.com 2021-12-27T07:45:27+00:00 05be23ef78f76a741d529226a8764d81c719a1e3 Add runtime pm support to dynamically manage the clock. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-7-xiaoning.wang@nxp.com 
Add runtime pm support to dynamically manage the clock.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211227074529.1660398-7-xiaoning.wang@nxp.com
i3c: master: svc: set ODSTOP to let I2C device see the STOP signal 2022-01-05T08:53:44+00:00 Clark Wang xiaoning.wang@nxp.com 2021-12-27T07:45:26+00:00 173fcb27210b18b38f1080f1c8f806e02cf8a53b If using I2C/I3C mixed mode, need to set ODSTOP. Otherwise, the I2C devices cannot see the stop signal. It may cause message sending errors. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-6-xiaoning.wang@nxp.com 
If using I2C/I3C mixed mode, need to set ODSTOP. Otherwise, the I2C
devices cannot see the stop signal. It may cause message sending errors.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211227074529.1660398-6-xiaoning.wang@nxp.com
i3c: master: svc: add support for slave to stop returning data 2022-01-05T08:53:44+00:00 Clark Wang xiaoning.wang@nxp.com 2021-12-27T07:45:25+00:00 d5e512574dd2eb06ace859b27cafb0de41743bb5 When i3c controller reads data from slave device, slave device can stop returning data with an ACK after any byte. Add this support for svc i3c controller. Otherwise, it will timeout when the slave device ends the read operation early. Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Reviewed-by: Jun Li <jun.li@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211227074529.1660398-5-xiaoning.wang@nxp.com 
When i3c controller reads data from slave device, slave device can stop
returning data with an ACK after any byte.
Add this support for svc i3c controller. Otherwise, it will timeout
when the slave device ends the read operation early.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211227074529.1660398-5-xiaoning.wang@nxp.com