linux-stable.git/drivers/i2c, branch v6.6.9 Linux kernel stable tree i2c: aspeed: Handle the coalesced stop conditions with the start conditions. 2024-01-01T12:42:35+00:00 Quan Nguyen quan@os.amperecomputing.com 2023-12-11T10:22:16+00:00 8f21b05995b3a8f79b87b6057fe1c254b6bd8879 [ Upstream commit b4cc1cbba5195a4dd497cf2f8f09e7807977d543 ] Some masters may drive the transfers with low enough latency between the nak/stop phase of the current command and the start/address phase of the following command that the interrupts are coalesced by the time we process them. Handle the stop conditions before processing SLAVE_MATCH to fix the complaints that sometimes occur below. "aspeed-i2c-bus 1e78a040.i2c-bus: irq handled != irq. Expected 0x00000086, but was 0x00000084" Fixes: f9eb91350bb2 ("i2c: aspeed: added slave support for Aspeed I2C driver") Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b4cc1cbba5195a4dd497cf2f8f09e7807977d543 ]

Some masters may drive the transfers with low enough latency between
the nak/stop phase of the current command and the start/address phase
of the following command that the interrupts are coalesced by the
time we process them.
Handle the stop conditions before processing SLAVE_MATCH to fix the
complaints that sometimes occur below.

"aspeed-i2c-bus 1e78a040.i2c-bus: irq handled != irq. Expected
0x00000086, but was 0x00000084"

Fixes: f9eb91350bb2 ("i2c: aspeed: added slave support for Aspeed I2C driver")
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: qcom-geni: fix missing clk_disable_unprepare() and geni_se_resources_off() 2024-01-01T12:42:34+00:00 Yang Yingliang yangyingliang@huawei.com 2023-11-30T01:43:24+00:00 5fcd03fa028ba2d77717de41197fd5baa5bc7c5c [ Upstream commit 043465b66506e8c647cdd38a2db1f2ee0f369a1b ] Add missing clk_disable_unprepare() and geni_se_resources_off() in the error path in geni_i2c_probe(). Fixes: 14d02fbadb5d ("i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 043465b66506e8c647cdd38a2db1f2ee0f369a1b ]

Add missing clk_disable_unprepare() and geni_se_resources_off() in the error
path in geni_i2c_probe().

Fixes: 14d02fbadb5d ("i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: ocores: Move system PM hooks to the NOIRQ phase 2023-12-13T17:44:57+00:00 Samuel Holland samuel.holland@sifive.com 2023-11-13T02:32:45+00:00 22a59e51ded2d02dd146d140389e31796327ac63 [ Upstream commit 382561d16854a747e6df71034da08d20d6013dfe ] When an I2C device contains a wake IRQ subordinate to a regmap-irq chip, the regmap-irq code must be able to perform I2C transactions during suspend_device_irqs() and resume_device_irqs(). Therefore, the bus must be suspended/resumed during the NOIRQ phase. Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 382561d16854a747e6df71034da08d20d6013dfe ]

When an I2C device contains a wake IRQ subordinate to a regmap-irq chip,
the regmap-irq code must be able to perform I2C transactions during
suspend_device_irqs() and resume_device_irqs(). Therefore, the bus must
be suspended/resumed during the NOIRQ phase.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: designware: Fix corrupted memory seen in the ISR 2023-12-13T17:44:56+00:00 Jan Bottorff janb@os.amperecomputing.com 2023-11-09T03:19:27+00:00 f5d10651396c52b95dc1b6e9867385e2675cff53 [ Upstream commit f726eaa787e9f9bc858c902d18a09af6bcbfcdaf ] When running on a many core ARM64 server, errors were happening in the ISR that looked like corrupted memory. These corruptions would fix themselves if small delays were inserted in the ISR. Errors reported by the driver included "i2c_designware APMC0D0F:00: i2c_dw_xfer_msg: invalid target address" and "i2c_designware APMC0D0F:00:controller timed out" during in-band IPMI SSIF stress tests. The problem was determined to be memory writes in the driver were not becoming visible to all cores when execution rapidly shifted between cores, like when a register write immediately triggers an ISR. Processors with weak memory ordering, like ARM64, make no guarantees about the order normal memory writes become globally visible, unless barrier instructions are used to control ordering. To solve this, regmap accessor functions configured by this driver were changed to use non-relaxed forms of the low-level register access functions, which include a barrier on platforms that require it. This assures memory writes before a controller register access are visible to all cores. The community concluded defaulting to correct operation outweighed defaulting to the small performance gains from using relaxed access functions. Being a low speed device added weight to this choice of default register access behavior. Signed-off-by: Jan Bottorff <janb@os.amperecomputing.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f726eaa787e9f9bc858c902d18a09af6bcbfcdaf ]

When running on a many core ARM64 server, errors were
happening in the ISR that looked like corrupted memory. These
corruptions would fix themselves if small delays were inserted
in the ISR. Errors reported by the driver included "i2c_designware
APMC0D0F:00: i2c_dw_xfer_msg: invalid target address" and
"i2c_designware APMC0D0F:00:controller timed out" during
in-band IPMI SSIF stress tests.

The problem was determined to be memory writes in the driver were not
becoming visible to all cores when execution rapidly shifted between
cores, like when a register write immediately triggers an ISR.
Processors with weak memory ordering, like ARM64, make no
guarantees about the order normal memory writes become globally
visible, unless barrier instructions are used to control ordering.

To solve this, regmap accessor functions configured by this driver
were changed to use non-relaxed forms of the low-level register
access functions, which include a barrier on platforms that require
it. This assures memory writes before a controller register access are
visible to all cores. The community concluded defaulting to correct
operation outweighed defaulting to the small performance gains from
using relaxed access functions. Being a low speed device added weight to
this choice of default register access behavior.

Signed-off-by: Jan Bottorff <janb@os.amperecomputing.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: i801: fix potential race in i801_block_transaction_byte_by_byte 2023-11-28T17:20:11+00:00 Heiner Kallweit hkallweit1@gmail.com 2023-09-09T20:25:06+00:00 74ee67b1a776db627a9f6766b1a09b10dfe66528 commit f78ca48a8ba9cdec96e8839351e49eec3233b177 upstream. Currently we set SMBHSTCNT_LAST_BYTE only after the host has started receiving the last byte. If we get e.g. preempted before setting SMBHSTCNT_LAST_BYTE, the host may be finished with receiving the byte before SMBHSTCNT_LAST_BYTE is set. Therefore change the code to set SMBHSTCNT_LAST_BYTE before writing SMBHSTSTS_BYTE_DONE for the byte before the last byte. Now the code is also consistent with what we do in i801_isr_byte_done(). Reported-by: Jean Delvare <jdelvare@suse.com> Closes: https://lore.kernel.org/linux-i2c/20230828152747.09444625@endymion.delvare/ Cc: stable@vger.kernel.org Acked-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit f78ca48a8ba9cdec96e8839351e49eec3233b177 upstream.

Currently we set SMBHSTCNT_LAST_BYTE only after the host has started
receiving the last byte. If we get e.g. preempted before setting
SMBHSTCNT_LAST_BYTE, the host may be finished with receiving the byte
before SMBHSTCNT_LAST_BYTE is set.
Therefore change the code to set SMBHSTCNT_LAST_BYTE before writing
SMBHSTSTS_BYTE_DONE for the byte before the last byte. Now the code
is also consistent with what we do in i801_isr_byte_done().

Reported-by: Jean Delvare <jdelvare@suse.com>
Closes: https://lore.kernel.org/linux-i2c/20230828152747.09444625@endymion.delvare/
Cc: stable@vger.kernel.org
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c: designware: Disable TX_EMPTY irq while waiting for block length byte 2023-11-28T17:20:11+00:00 Tam Nguyen tamnguyenchi@os.amperecomputing.com 2023-11-02T03:30:08+00:00 b382f69317efb2578ef327d3eb413ea983cac9e6 commit e8183fa10c25c7b3c20670bf2b430ddcc1ee03c0 upstream. During SMBus block data read process, we have seen high interrupt rate because of TX_EMPTY irq status while waiting for block length byte (the first data byte after the address phase). The interrupt handler does not do anything because the internal state is kept as STATUS_WRITE_IN_PROGRESS. Hence, we should disable TX_EMPTY IRQ until I2C DesignWare receives first data byte from I2C device, then re-enable it to resume SMBus transaction. It takes 0.789 ms for host to receive data length from slave. Without the patch, i2c_dw_isr() is called 99 times by TX_EMPTY interrupt. And it is none after applying the patch. Cc: stable@vger.kernel.org Co-developed-by: Chuong Tran <chuong@os.amperecomputing.com> Signed-off-by: Chuong Tran <chuong@os.amperecomputing.com> Signed-off-by: Tam Nguyen <tamnguyenchi@os.amperecomputing.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e8183fa10c25c7b3c20670bf2b430ddcc1ee03c0 upstream.

During SMBus block data read process, we have seen high interrupt rate
because of TX_EMPTY irq status while waiting for block length byte (the
first data byte after the address phase). The interrupt handler does not
do anything because the internal state is kept as STATUS_WRITE_IN_PROGRESS.
Hence, we should disable TX_EMPTY IRQ until I2C DesignWare receives
first data byte from I2C device, then re-enable it to resume SMBus
transaction.

It takes 0.789 ms for host to receive data length from slave.
Without the patch, i2c_dw_isr() is called 99 times by TX_EMPTY interrupt.
And it is none after applying the patch.

Cc: stable@vger.kernel.org
Co-developed-by: Chuong Tran <chuong@os.amperecomputing.com>
Signed-off-by: Chuong Tran <chuong@os.amperecomputing.com>
Signed-off-by: Tam Nguyen <tamnguyenchi@os.amperecomputing.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "i2c: pxa: move to generic GPIO recovery" 2023-11-28T17:20:10+00:00 Robert Marko robert.marko@sartura.hr 2023-11-10T09:30:11+00:00 ff4d0309780c9c40121206b446605ba18c31e675 commit 7b211c7671212cad0b83603c674838c7e824d845 upstream. This reverts commit 0b01392c18b9993a584f36ace1d61118772ad0ca. Conversion of PXA to generic I2C recovery, makes the I2C bus completely lock up if recovery pinctrl is present in the DT and I2C recovery is enabled. So, until the generic I2C recovery can also work with PXA lets revert to have working I2C and I2C recovery again. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: stable@vger.kernel.org # 5.11+ Acked-by: Andi Shyti <andi.shyti@kernel.org> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7b211c7671212cad0b83603c674838c7e824d845 upstream.

This reverts commit 0b01392c18b9993a584f36ace1d61118772ad0ca.

Conversion of PXA to generic I2C recovery, makes the I2C bus completely
lock up if recovery pinctrl is present in the DT and I2C recovery is
enabled.

So, until the generic I2C recovery can also work with PXA lets revert
to have working I2C and I2C recovery again.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: stable@vger.kernel.org # 5.11+
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c: core: Run atomic i2c xfer when !preemptible 2023-11-28T17:20:05+00:00 Benjamin Bara benjamin.bara@skidata.com 2023-07-15T07:53:24+00:00 3473cf43b9068b9dfef2f545f833f33c6a544b91 commit aa49c90894d06e18a1ee7c095edbd2f37c232d02 upstream. Since bae1d3a05a8b, i2c transfers are non-atomic if preemption is disabled. However, non-atomic i2c transfers require preemption (e.g. in wait_for_completion() while waiting for the DMA). panic() calls preempt_disable_notrace() before calling emergency_restart(). Therefore, if an i2c device is used for the restart, the xfer should be atomic. This avoids warnings like: [ 12.667612] WARNING: CPU: 1 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x33c/0x6b0 [ 12.676926] Voluntary context switch within RCU read-side critical section! ... [ 12.742376] schedule_timeout from wait_for_completion_timeout+0x90/0x114 [ 12.749179] wait_for_completion_timeout from tegra_i2c_wait_completion+0x40/0x70 ... [ 12.994527] atomic_notifier_call_chain from machine_restart+0x34/0x58 [ 13.001050] machine_restart from panic+0x2a8/0x32c Use !preemptible() instead, which is basically the same check as pre-v5.2. Fixes: bae1d3a05a8b ("i2c: core: remove use of in_atomic()") Cc: stable@vger.kernel.org # v5.2+ Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Acked-by: Wolfram Sang <wsa@kernel.org> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com> Link: https://lore.kernel.org/r/20230327-tegra-pmic-reboot-v7-2-18699d5dcd76@skidata.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit aa49c90894d06e18a1ee7c095edbd2f37c232d02 upstream.

Since bae1d3a05a8b, i2c transfers are non-atomic if preemption is
disabled. However, non-atomic i2c transfers require preemption (e.g. in
wait_for_completion() while waiting for the DMA).

panic() calls preempt_disable_notrace() before calling
emergency_restart(). Therefore, if an i2c device is used for the
restart, the xfer should be atomic. This avoids warnings like:

[   12.667612] WARNING: CPU: 1 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x33c/0x6b0
[   12.676926] Voluntary context switch within RCU read-side critical section!
...
[   12.742376]  schedule_timeout from wait_for_completion_timeout+0x90/0x114
[   12.749179]  wait_for_completion_timeout from tegra_i2c_wait_completion+0x40/0x70
...
[   12.994527]  atomic_notifier_call_chain from machine_restart+0x34/0x58
[   13.001050]  machine_restart from panic+0x2a8/0x32c

Use !preemptible() instead, which is basically the same check as
pre-v5.2.

Fixes: bae1d3a05a8b ("i2c: core: remove use of in_atomic()")
Cc: stable@vger.kernel.org # v5.2+
Suggested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Link: https://lore.kernel.org/r/20230327-tegra-pmic-reboot-v7-2-18699d5dcd76@skidata.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c: dev: copy userspace array safely 2023-11-28T17:19:47+00:00 Philipp Stanner pstanner@redhat.com 2023-11-02T19:26:13+00:00 bef76b8544939518dafa3325bcd438b111136437 [ Upstream commit cc9c54232f04aef3a5d7f64a0ece7df00f1aaa3d ] i2c-dev.c utilizes memdup_user() to copy a userspace array. This is done without an overflow check. Use the new wrapper memdup_array_user() to copy the array more safely. Suggested-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit cc9c54232f04aef3a5d7f64a0ece7df00f1aaa3d ]

i2c-dev.c utilizes memdup_user() to copy a userspace array. This is done
without an overflow check.

Use the new wrapper memdup_array_user() to copy the array more safely.

Suggested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: sun6i-p2wi: Prevent potential division by zero 2023-11-28T17:19:46+00:00 Axel Lin axel.lin@ingics.com 2016-04-13T00:54:30+00:00 a5a583fbb002ae8115f53f8ec364f22c7aa40442 [ Upstream commit 5ac61d26b8baff5b2e5a9f3dc1ef63297e4b53e7 ] Make sure we don't OOPS in case clock-frequency is set to 0 in a DT. The variable set here is later used as a divisor. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 5ac61d26b8baff5b2e5a9f3dc1ef63297e4b53e7 ]

Make sure we don't OOPS in case clock-frequency is set to 0 in a DT. The
variable set here is later used as a divisor.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>