iproc_i2c_rd_reg() and iproc_i2c_wr_reg() are called from both
interrupt context (e.g. bcm_iproc_i2c_isr) and process context
(e.g. bcm_iproc_i2c_suspend). Therefore, interrupts should be
disabled to avoid potential deadlock. To prevent this scenario,
use spin_lock_irqsave().

Fixes: 9a1038728037 ("i2c: iproc: add NIC I2C support")
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

The "ret" variable is uninitialized.  It was the "p2wi->rstc" variable
that was intended.  We can also use the %pe string format to print the
error code name instead of just the number.

Fixes: 75ff8a340a81 ("i2c: sun6i-p2wi: Use devm_clk_get_enabled()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

The controller may be shared with other port, for example the firmware.
Handle the interrupt from other sources will cause crash since some
data are not initialized. So only handle the interrupt of the driver's
transfer and discard others.

Fixes: d62fbdb99a85 ("i2c: add support for HiSilicon I2C controller")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20230801124625.63587-1-yangyicong@huawei.com
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Tegra processors prior to Tegra186 used APB DMA for I2C requiring
CONFIG_TEGRA20_APB_DMA=y while Tegra186 and later use GPC DMA requiring
CONFIG_TEGRA186_GPC_DMA=y.

The check for if the processor uses APB DMA is inverted and so the wrong
DMA config options are checked.

This means if CONFIG_TEGRA20_APB_DMA=y but CONFIG_TEGRA186_GPC_DMA=n
with a Tegra186 or later processor the driver will incorrectly think DMA is
enabled and attempt to request DMA channels that will never be availible,
leaving the driver in a perpetual EPROBE_DEFER state.

Fixes: 48cb6356fae1 ("i2c: tegra: Add GPCDMA support")
Signed-off-by: Parker Newman <pnewman@connecttech.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Akhil R <akhilrajeev@nvidia.com>
Link: https://lore.kernel.org/r/fcfcf9b3-c8c4-9b34-2ff8-cd60a3d490bd@connecttech.com
Signed-off-by: Wolfram Sang <wsa@kernel.org>

If the driver fails to obtain a DMA channel, it will initiate cleanup
and try to release the DMA channel that couldn't be retrieved. This will
cause a crash because the cleanup will try to dereference an ERR_PTR()-
encoded error code.

However, there's nothing to clean up at this point yet, so we can avoid
this by simply resetting the DMA channel to NULL instead of storing the
error code.

Fixes: fcc8a89a1c83 ("i2c: tegra: Share same DMA channel for RX and TX")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

In the I2C_FUNC_SMBUS_BLOCK_DATA case, the invalid length byte value
(outside of 1-32) of the SMBus block data response from the Slave device
is not correctly handled by the I2C Designware driver.

In case IC_EMPTYFIFO_HOLD_MASTER_EN==1, which cannot be detected
from the registers, the Master can be disabled only if the STOP bit
is set. Without STOP bit set, the Master remains active, holding the bus
until receiving a block data response length. This hangs the bus and
is unrecoverable.

Avoid this by issuing another dump read to reach the stop condition when
an invalid length byte is received.

Cc: stable@vger.kernel.org
Signed-off-by: Tam Nguyen <tamnguyenchi@os.amperecomputing.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20230726080001.337353-3-tamnguyenchi@os.amperecomputing.com
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Commit 0daede80f870 ("i2c: designware: Convert driver to using regmap API")
changes the logic to validate the whole 32-bit return value of
DW_IC_DATA_CMD register instead of 8-bit LSB without reason.

Later, commit f53f15ba5a85 ("i2c: designware: Get right data length"),
introduced partial fix but not enough because the "tmp > 0" still test
tmp as 32-bit value and is wrong in case the IC_DATA_CMD[11] is set.

Revert the logic to just before commit 0daede80f870
("i2c: designware: Convert driver to using regmap API").

Fixes: f53f15ba5a85 ("i2c: designware: Get right data length")
Fixes: 0daede80f870 ("i2c: designware: Convert driver to using regmap API")
Cc: stable@vger.kernel.org
Signed-off-by: Tam Nguyen <tamnguyenchi@os.amperecomputing.com>
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20230726080001.337353-2-tamnguyenchi@os.amperecomputing.com
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

On MX8X platforms, the default clock rate is 0 if without explicit
clock setting in dts nodes. I2c can't work when i2c peripheral clk
rate is 0.

Add a i2c peripheral clk rate check before configuring the clock
register. When i2c peripheral clk rate is 0 and directly return
-EINVAL.

Signed-off-by: Carlos Song <carlos.song@nxp.com>
Acked-by: Dong Aisheng <Aisheng.dong@nxp.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Pull more i2c updates from Wolfram Sang:

 - xiic patch should have been in the original pull but slipped through

 - mpc patch fixes a build regression

 - nomadik cleanup

* tag 'i2c-for-6.5-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mpc: Drop unused variable
  i2c: nomadik: Remove a useless call in the remove function
  i2c: xiic: Don't try to handle more interrupt events after error

Pull more ACPI updates from Rafael Wysocki:
 "These fix a couple of compiler warnings, refine an ACPI device
  enumeration quirk to address a driver regression and clean up code.

  Specifics:

   - Make acpi_companion_match() return a const pointer and update its
     callers accordingly (Andy Shevchenko)

   - Move the extern declaration of the acpi_root variable to a header
     file so as to address a compiler warning (Andy Shevchenko)

   - Address compiler warnings in the ACPI device enumeration code by
     adding a missing header file include to it (Ben Dooks)

   - Refine the SMB0001 quirk in the ACPI device enumeration code so as
     to address an i2c-scmi driver regression (Andy Shevchenko)

   - Clean up two pieces of the ACPI device enumeration code (Andy
     Shevchenko)"

* tag 'acpi-6.5-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: scan: Use the acpi_match_acpi_device() helper
  ACPI: platform: Move SMB0001 HID to the header and reuse
  ACPI: platform: Ignore SMB0001 only when it has resources
  ACPI: bus: Introduce acpi_match_acpi_device() helper
  ACPI: scan: fix undeclared variable warnings by including sleep.h
  ACPI: bus: Constify acpi_companion_match() returned value
  ACPI: scan: Move acpi_root to internal header