linux-stable.git/drivers/i2c, branch v6.1.142 Linux kernel stable tree i2c: npcm: Add clock toggle recovery 2025-06-27T10:07:33+00:00 Tali Perry tali.perry1@gmail.com 2025-03-28T19:32:50+00:00 e9a83fe283f142dcfe55b463df417b402b045d6e [ Upstream commit 38010591a0fc3203f1cee45b01ab358b72dd9ab2 ] During init of the bus, the module checks that the bus is idle. If one of the lines are stuck try to recover them first before failing. Sometimes SDA and SCL are low if improper reset occurs (e.g., reboot). Signed-off-by: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Mohammed Elbadry <mohammed.0.elbadry@gmail.com> Reviewed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com> Link: https://lore.kernel.org/r/20250328193252.1570811-1-mohammed.0.elbadry@gmail.com Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 38010591a0fc3203f1cee45b01ab358b72dd9ab2 ]

During init of the bus, the module checks that the bus is idle.
If one of the lines are stuck try to recover them first before failing.
Sometimes SDA and SCL are low if improper reset occurs (e.g., reboot).

Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Mohammed Elbadry <mohammed.0.elbadry@gmail.com>
Reviewed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/20250328193252.1570811-1-mohammed.0.elbadry@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: tegra: check msg length in SMBUS block read 2025-06-27T10:07:33+00:00 Akhil R akhilrajeev@nvidia.com 2025-04-24T05:33:20+00:00 c39d1a9ae4ad66afcecab124d7789722bfe909fa [ Upstream commit a6e04f05ce0b070ab39d5775580e65c7d943da0b ] For SMBUS block read, do not continue to read if the message length passed from the device is '0' or greater than the maximum allowed bytes. Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20250424053320.19211-1-akhilrajeev@nvidia.com Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a6e04f05ce0b070ab39d5775580e65c7d943da0b ]

For SMBUS block read, do not continue to read if the message length
passed from the device is '0' or greater than the maximum allowed bytes.

Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250424053320.19211-1-akhilrajeev@nvidia.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: designware: Invoke runtime suspend on quick slave re-registration 2025-06-27T10:07:33+00:00 Tan En De ende.tan@starfivetech.com 2025-04-12T02:33:03+00:00 a15d4ae4f7eb559710ae35b0aefbda2e63387179 [ Upstream commit 2fe2b969d911a09abcd6a47401a3c66c38a310e6 ] Replaced pm_runtime_put() with pm_runtime_put_sync_suspend() to ensure the runtime suspend is invoked immediately when unregistering a slave. This prevents a race condition where suspend was skipped when unregistering and registering slave in quick succession. For example, consider the rapid sequence of `delete_device -> new_device -> delete_device -> new_device`. In this sequence, it is observed that the dw_i2c_plat_runtime_suspend() might not be invoked after `delete_device` operation. This is because after `delete_device` operation, when the pm_runtime_put() is about to trigger suspend, the following `new_device` operation might race and cancel the suspend. If that happens, during the `new_device` operation, dw_i2c_plat_runtime_resume() is skipped (since there was no suspend), which means `i_dev->init()`, i.e. i2c_dw_init_slave(), is skipped. Since i2c_dw_init_slave() is skipped, i2c_dw_configure_fifo_slave() is skipped too, which leaves `DW_IC_INTR_MASK` unconfigured. If we inspect the interrupt mask register using devmem, it will show as zero. Example shell script to reproduce the issue: ``` #!/bin/sh SLAVE_LADDR=0x1010 SLAVE_BUS=13 NEW_DEVICE=/sys/bus/i2c/devices/i2c-$SLAVE_BUS/new_device DELETE_DEVICE=/sys/bus/i2c/devices/i2c-$SLAVE_BUS/delete_device # Create initial device echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE sleep 2 # Rapid sequence of # delete_device -> new_device -> delete_device -> new_device echo $SLAVE_LADDR > $DELETE_DEVICE echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE echo $SLAVE_LADDR > $DELETE_DEVICE echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE # Using devmem to inspect IC_INTR_MASK will show as zero ``` Signed-off-by: Tan En De <ende.tan@starfivetech.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20250412023303.378600-1-ende.tan@starfivetech.com Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2fe2b969d911a09abcd6a47401a3c66c38a310e6 ]

Replaced pm_runtime_put() with pm_runtime_put_sync_suspend() to ensure
the runtime suspend is invoked immediately when unregistering a slave.
This prevents a race condition where suspend was skipped when
unregistering and registering slave in quick succession.

For example, consider the rapid sequence of
`delete_device -> new_device -> delete_device -> new_device`.
In this sequence, it is observed that the dw_i2c_plat_runtime_suspend()
might not be invoked after `delete_device` operation.

This is because after `delete_device` operation, when the
pm_runtime_put() is about to trigger suspend, the following `new_device`
operation might race and cancel the suspend.

If that happens, during the `new_device` operation,
dw_i2c_plat_runtime_resume() is skipped (since there was no suspend), which
means `i_dev->init()`, i.e. i2c_dw_init_slave(), is skipped.
Since i2c_dw_init_slave() is skipped, i2c_dw_configure_fifo_slave() is
skipped too, which leaves `DW_IC_INTR_MASK` unconfigured. If we inspect
the interrupt mask register using devmem, it will show as zero.

Example shell script to reproduce the issue:
```
  #!/bin/sh

  SLAVE_LADDR=0x1010
  SLAVE_BUS=13
  NEW_DEVICE=/sys/bus/i2c/devices/i2c-$SLAVE_BUS/new_device
  DELETE_DEVICE=/sys/bus/i2c/devices/i2c-$SLAVE_BUS/delete_device

  # Create initial device
  echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE
  sleep 2

  # Rapid sequence of
  # delete_device -> new_device -> delete_device -> new_device
  echo $SLAVE_LADDR > $DELETE_DEVICE
  echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE
  echo $SLAVE_LADDR > $DELETE_DEVICE
  echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE

  # Using devmem to inspect IC_INTR_MASK will show as zero
```

Signed-off-by: Tan En De <ende.tan@starfivetech.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20250412023303.378600-1-ende.tan@starfivetech.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: pxa: fix call balance of i2c->clk handling routines 2025-06-04T12:40:04+00:00 Vitalii Mordan mordan@ispras.ru 2025-02-12T17:28:03+00:00 e212c8e9f2f37ee2a94b2bd4ed57e802e039e978 [ Upstream commit be7113d2e2a6f20cbee99c98d261a1fd6fd7b549 ] If the clock i2c->clk was not enabled in i2c_pxa_probe(), it should not be disabled in any path. Found by Linux Verification Center (linuxtesting.org) with Klever. Signed-off-by: Vitalii Mordan <mordan@ispras.ru> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250212172803.1422136-1-mordan@ispras.ru Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit be7113d2e2a6f20cbee99c98d261a1fd6fd7b549 ]

If the clock i2c->clk was not enabled in i2c_pxa_probe(), it should not be
disabled in any path.

Found by Linux Verification Center (linuxtesting.org) with Klever.

Signed-off-by: Vitalii Mordan <mordan@ispras.ru>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250212172803.1422136-1-mordan@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: qup: Vote for interconnect bandwidth to DRAM 2025-06-04T12:40:04+00:00 Stephan Gerhold stephan.gerhold@kernkonzept.com 2023-11-28T09:48:37+00:00 fb6a04c3b76a77176c009bdfef763195f133f87c [ Upstream commit d4f35233a6345f62637463ef6e0708f44ffaa583 ] When the I2C QUP controller is used together with a DMA engine it needs to vote for the interconnect path to the DRAM. Otherwise it may be unable to access the memory quickly enough. The requested peak bandwidth is dependent on the I2C core clock. To avoid sending votes too often the bandwidth is always requested when a DMA transfer starts, but dropped only on runtime suspend. Runtime suspend should only happen if no transfer is active. After resumption we can defer the next vote until the first DMA transfer actually happens. The implementation is largely identical to the one introduced for spi-qup in commit ecdaa9473019 ("spi: qup: Vote for interconnect bandwidth to DRAM") since both drivers represent the same hardware block. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20231128-i2c-qup-dvfs-v1-3-59a0e3039111@kernkonzept.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d4f35233a6345f62637463ef6e0708f44ffaa583 ]

When the I2C QUP controller is used together with a DMA engine it needs
to vote for the interconnect path to the DRAM. Otherwise it may be
unable to access the memory quickly enough.

The requested peak bandwidth is dependent on the I2C core clock.

To avoid sending votes too often the bandwidth is always requested when
a DMA transfer starts, but dropped only on runtime suspend. Runtime
suspend should only happen if no transfer is active. After resumption we
can defer the next vote until the first DMA transfer actually happens.

The implementation is largely identical to the one introduced for
spi-qup in commit ecdaa9473019 ("spi: qup: Vote for interconnect
bandwidth to DRAM") since both drivers represent the same hardware
block.

Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20231128-i2c-qup-dvfs-v1-3-59a0e3039111@kernkonzept.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: imx-lpi2c: Fix clock count when probe defers 2025-05-09T07:41:34+00:00 Clark Wang xiaoning.wang@nxp.com 2025-04-21T06:23:41+00:00 b36749bb27073e7cd4723ebe9b8e9b1d2053dedc commit b1852c5de2f2a37dd4462f7837c9e3e678f9e546 upstream. Deferred probe with pm_runtime_put() may delay clock disable, causing incorrect clock usage count. Use pm_runtime_put_sync() to ensure the clock is disabled immediately. Fixes: 13d6eb20fc79 ("i2c: imx-lpi2c: add runtime pm support") Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Signed-off-by: Carlos Song <carlos.song@nxp.com> Cc: <stable@vger.kernel.org> # v4.16+ Link: https://lore.kernel.org/r/20250421062341.2471922-1-carlos.song@nxp.com Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b1852c5de2f2a37dd4462f7837c9e3e678f9e546 upstream.

Deferred probe with pm_runtime_put() may delay clock disable, causing
incorrect clock usage count. Use pm_runtime_put_sync() to ensure the
clock is disabled immediately.

Fixes: 13d6eb20fc79 ("i2c: imx-lpi2c: add runtime pm support")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Cc: <stable@vger.kernel.org> # v4.16+
Link: https://lore.kernel.org/r/20250421062341.2471922-1-carlos.song@nxp.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c: cros-ec-tunnel: defer probe if parent EC is not present 2025-04-25T08:43:53+00:00 Thadeu Lima de Souza Cascardo cascardo@igalia.com 2025-04-07T20:33:34+00:00 3090cad5ccff8963b95160f4060068048a1e4c4c commit 424eafe65647a8d6c690284536e711977153195a upstream. When i2c-cros-ec-tunnel and the EC driver are built-in, the EC parent device will not be found, leading to NULL pointer dereference. That can also be reproduced by unbinding the controller driver and then loading i2c-cros-ec-tunnel module (or binding the device). [ 271.991245] BUG: kernel NULL pointer dereference, address: 0000000000000058 [ 271.998215] #PF: supervisor read access in kernel mode [ 272.003351] #PF: error_code(0x0000) - not-present page [ 272.008485] PGD 0 P4D 0 [ 272.011022] Oops: Oops: 0000 [#1] SMP NOPTI [ 272.015207] CPU: 0 UID: 0 PID: 3859 Comm: insmod Tainted: G S 6.15.0-rc1-00004-g44722359ed83 #30 PREEMPT(full) 3c7fb39a552e7d949de2ad921a7d6588d3a4fdc5 [ 272.030312] Tainted: [S]=CPU_OUT_OF_SPEC [ 272.034233] Hardware name: HP Berknip/Berknip, BIOS Google_Berknip.13434.356.0 05/17/2021 [ 272.042400] RIP: 0010:ec_i2c_probe+0x2b/0x1c0 [i2c_cros_ec_tunnel] [ 272.048577] Code: 1f 44 00 00 41 57 41 56 41 55 41 54 53 48 83 ec 10 65 48 8b 05 06 a0 6c e7 48 89 44 24 08 4c 8d 7f 10 48 8b 47 50 4c 8b 60 78 <49> 83 7c 24 58 00 0f 84 2f 01 00 00 48 89 fb be 30 06 00 00 4c 9 [ 272.067317] RSP: 0018:ffffa32082a03940 EFLAGS: 00010282 [ 272.072541] RAX: ffff969580b6a810 RBX: ffff969580b68c10 RCX: 0000000000000000 [ 272.079672] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff969580b68c00 [ 272.086804] RBP: 00000000fffffdfb R08: 0000000000000000 R09: 0000000000000000 [ 272.093936] R10: 0000000000000000 R11: ffffffffc0600000 R12: 0000000000000000 [ 272.101067] R13: ffffffffa666fbb8 R14: ffffffffc05b5528 R15: ffff969580b68c10 [ 272.108198] FS: 00007b930906fc40(0000) GS:ffff969603149000(0000) knlGS:0000000000000000 [ 272.116282] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 272.122024] CR2: 0000000000000058 CR3: 000000012631c000 CR4: 00000000003506f0 [ 272.129155] Call Trace: [ 272.131606] <TASK> [ 272.133709] ? acpi_dev_pm_attach+0xdd/0x110 [ 272.137985] platform_probe+0x69/0xa0 [ 272.141652] really_probe+0x152/0x310 [ 272.145318] __driver_probe_device+0x77/0x110 [ 272.149678] driver_probe_device+0x1e/0x190 [ 272.153864] __driver_attach+0x10b/0x1e0 [ 272.157790] ? driver_attach+0x20/0x20 [ 272.161542] bus_for_each_dev+0x107/0x150 [ 272.165553] bus_add_driver+0x15d/0x270 [ 272.169392] driver_register+0x65/0x110 [ 272.173232] ? cleanup_module+0xa80/0xa80 [i2c_cros_ec_tunnel 3a00532f3f4af4a9eade753f86b0f8dd4e4e5698] [ 272.182617] do_one_initcall+0x110/0x350 [ 272.186543] ? security_kernfs_init_security+0x49/0xd0 [ 272.191682] ? __kernfs_new_node+0x1b9/0x240 [ 272.195954] ? security_kernfs_init_security+0x49/0xd0 [ 272.201093] ? __kernfs_new_node+0x1b9/0x240 [ 272.205365] ? kernfs_link_sibling+0x105/0x130 [ 272.209810] ? kernfs_next_descendant_post+0x1c/0xa0 [ 272.214773] ? kernfs_activate+0x57/0x70 [ 272.218699] ? kernfs_add_one+0x118/0x160 [ 272.222710] ? __kernfs_create_file+0x71/0xa0 [ 272.227069] ? sysfs_add_bin_file_mode_ns+0xd6/0x110 [ 272.232033] ? internal_create_group+0x453/0x4a0 [ 272.236651] ? __vunmap_range_noflush+0x214/0x2d0 [ 272.241355] ? __free_frozen_pages+0x1dc/0x420 [ 272.245799] ? free_vmap_area_noflush+0x10a/0x1c0 [ 272.250505] ? load_module+0x1509/0x16f0 [ 272.254431] do_init_module+0x60/0x230 [ 272.258181] __se_sys_finit_module+0x27a/0x370 [ 272.262627] do_syscall_64+0x6a/0xf0 [ 272.266206] ? do_syscall_64+0x76/0xf0 [ 272.269956] ? irqentry_exit_to_user_mode+0x79/0x90 [ 272.274836] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 272.279887] RIP: 0033:0x7b9309168d39 [ 272.283466] Code: 5b 41 5c 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d af 40 0c 00 f7 d8 64 89 01 8 [ 272.302210] RSP: 002b:00007fff50f1a288 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 272.309774] RAX: ffffffffffffffda RBX: 000058bf9b50f6d0 RCX: 00007b9309168d39 [ 272.316905] RDX: 0000000000000000 RSI: 000058bf6c103a77 RDI: 0000000000000003 [ 272.324036] RBP: 00007fff50f1a2e0 R08: 00007fff50f19218 R09: 0000000021ec4150 [ 272.331166] R10: 000058bf9b50f7f0 R11: 0000000000000246 R12: 0000000000000000 [ 272.338296] R13: 00000000fffffffe R14: 0000000000000000 R15: 000058bf6c103a77 [ 272.345428] </TASK> [ 272.347617] Modules linked in: i2c_cros_ec_tunnel(+) [ 272.364585] gsmi: Log Shutdown Reason 0x03 Returning -EPROBE_DEFER will allow the device to be bound once the controller is bound, in the case of built-in drivers. Fixes: 9d230c9e4f4e ("i2c: ChromeOS EC tunnel driver") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250407-null-ec-parent-v1-1-f7dda62d3110@igalia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 424eafe65647a8d6c690284536e711977153195a upstream.

When i2c-cros-ec-tunnel and the EC driver are built-in, the EC parent
device will not be found, leading to NULL pointer dereference.

That can also be reproduced by unbinding the controller driver and then
loading i2c-cros-ec-tunnel module (or binding the device).

[  271.991245] BUG: kernel NULL pointer dereference, address: 0000000000000058
[  271.998215] #PF: supervisor read access in kernel mode
[  272.003351] #PF: error_code(0x0000) - not-present page
[  272.008485] PGD 0 P4D 0
[  272.011022] Oops: Oops: 0000 [#1] SMP NOPTI
[  272.015207] CPU: 0 UID: 0 PID: 3859 Comm: insmod Tainted: G S                  6.15.0-rc1-00004-g44722359ed83 #30 PREEMPT(full)  3c7fb39a552e7d949de2ad921a7d6588d3a4fdc5
[  272.030312] Tainted: [S]=CPU_OUT_OF_SPEC
[  272.034233] Hardware name: HP Berknip/Berknip, BIOS Google_Berknip.13434.356.0 05/17/2021
[  272.042400] RIP: 0010:ec_i2c_probe+0x2b/0x1c0 [i2c_cros_ec_tunnel]
[  272.048577] Code: 1f 44 00 00 41 57 41 56 41 55 41 54 53 48 83 ec 10 65 48 8b 05 06 a0 6c e7 48 89 44 24 08 4c 8d 7f 10 48 8b 47 50 4c 8b 60 78 <49> 83 7c 24 58 00 0f 84 2f 01 00 00 48 89 fb be 30 06 00 00 4c 9
[  272.067317] RSP: 0018:ffffa32082a03940 EFLAGS: 00010282
[  272.072541] RAX: ffff969580b6a810 RBX: ffff969580b68c10 RCX: 0000000000000000
[  272.079672] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff969580b68c00
[  272.086804] RBP: 00000000fffffdfb R08: 0000000000000000 R09: 0000000000000000
[  272.093936] R10: 0000000000000000 R11: ffffffffc0600000 R12: 0000000000000000
[  272.101067] R13: ffffffffa666fbb8 R14: ffffffffc05b5528 R15: ffff969580b68c10
[  272.108198] FS:  00007b930906fc40(0000) GS:ffff969603149000(0000) knlGS:0000000000000000
[  272.116282] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  272.122024] CR2: 0000000000000058 CR3: 000000012631c000 CR4: 00000000003506f0
[  272.129155] Call Trace:
[  272.131606]  <TASK>
[  272.133709]  ? acpi_dev_pm_attach+0xdd/0x110
[  272.137985]  platform_probe+0x69/0xa0
[  272.141652]  really_probe+0x152/0x310
[  272.145318]  __driver_probe_device+0x77/0x110
[  272.149678]  driver_probe_device+0x1e/0x190
[  272.153864]  __driver_attach+0x10b/0x1e0
[  272.157790]  ? driver_attach+0x20/0x20
[  272.161542]  bus_for_each_dev+0x107/0x150
[  272.165553]  bus_add_driver+0x15d/0x270
[  272.169392]  driver_register+0x65/0x110
[  272.173232]  ? cleanup_module+0xa80/0xa80 [i2c_cros_ec_tunnel 3a00532f3f4af4a9eade753f86b0f8dd4e4e5698]
[  272.182617]  do_one_initcall+0x110/0x350
[  272.186543]  ? security_kernfs_init_security+0x49/0xd0
[  272.191682]  ? __kernfs_new_node+0x1b9/0x240
[  272.195954]  ? security_kernfs_init_security+0x49/0xd0
[  272.201093]  ? __kernfs_new_node+0x1b9/0x240
[  272.205365]  ? kernfs_link_sibling+0x105/0x130
[  272.209810]  ? kernfs_next_descendant_post+0x1c/0xa0
[  272.214773]  ? kernfs_activate+0x57/0x70
[  272.218699]  ? kernfs_add_one+0x118/0x160
[  272.222710]  ? __kernfs_create_file+0x71/0xa0
[  272.227069]  ? sysfs_add_bin_file_mode_ns+0xd6/0x110
[  272.232033]  ? internal_create_group+0x453/0x4a0
[  272.236651]  ? __vunmap_range_noflush+0x214/0x2d0
[  272.241355]  ? __free_frozen_pages+0x1dc/0x420
[  272.245799]  ? free_vmap_area_noflush+0x10a/0x1c0
[  272.250505]  ? load_module+0x1509/0x16f0
[  272.254431]  do_init_module+0x60/0x230
[  272.258181]  __se_sys_finit_module+0x27a/0x370
[  272.262627]  do_syscall_64+0x6a/0xf0
[  272.266206]  ? do_syscall_64+0x76/0xf0
[  272.269956]  ? irqentry_exit_to_user_mode+0x79/0x90
[  272.274836]  entry_SYSCALL_64_after_hwframe+0x55/0x5d
[  272.279887] RIP: 0033:0x7b9309168d39
[  272.283466] Code: 5b 41 5c 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d af 40 0c 00 f7 d8 64 89 01 8
[  272.302210] RSP: 002b:00007fff50f1a288 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[  272.309774] RAX: ffffffffffffffda RBX: 000058bf9b50f6d0 RCX: 00007b9309168d39
[  272.316905] RDX: 0000000000000000 RSI: 000058bf6c103a77 RDI: 0000000000000003
[  272.324036] RBP: 00007fff50f1a2e0 R08: 00007fff50f19218 R09: 0000000021ec4150
[  272.331166] R10: 000058bf9b50f7f0 R11: 0000000000000246 R12: 0000000000000000
[  272.338296] R13: 00000000fffffffe R14: 0000000000000000 R15: 000058bf6c103a77
[  272.345428]  </TASK>
[  272.347617] Modules linked in: i2c_cros_ec_tunnel(+)
[  272.364585] gsmi: Log Shutdown Reason 0x03

Returning -EPROBE_DEFER will allow the device to be bound once the
controller is bound, in the case of built-in drivers.

Fixes: 9d230c9e4f4e ("i2c: ChromeOS EC tunnel driver")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250407-null-ec-parent-v1-1-f7dda62d3110@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c: omap: fix IRQ storms 2025-03-28T20:59:00+00:00 Andreas Kemnade andreas@kemnade.info 2025-02-28T14:04:20+00:00 78f6d8f8fcff913f2fc6475d8c9d7e11a4d11378 commit 285df995f90e3d61d97f327d34b9659d92313314 upstream. On the GTA04A5 writing a reset command to the gyroscope causes IRQ storms because NACK IRQs are enabled and therefore triggered but not acked. Sending a reset command to the gyroscope by i2cset 1 0x69 0x14 0xb6 with an additional debug print in the ISR (not the thread) itself causes [ 363.353515] i2c i2c-1: ioctl, cmd=0x720, arg=0xbe801b00 [ 363.359039] omap_i2c 48072000.i2c: addr: 0x0069, len: 2, flags: 0x0, stop: 1 [ 363.366180] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x1110) [ 363.371673] omap_i2c 48072000.i2c: IRQ (ISR = 0x0010) [ 363.376892] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102) [ 363.382263] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102) [ 363.387664] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102) repeating till infinity [...] (0x2 = NACK, 0x100 = Bus free, which is not enabled) Apparently no other IRQ bit gets set, so this stalls. Do not ignore enabled interrupts and make sure they are acked. If the NACK IRQ is not needed, it should simply not enabled, but according to the above log, caring about it is necessary unless the Bus free IRQ is enabled and handled. The assumption that is will always come with a ARDY IRQ, which was the idea behind ignoring it, proves wrong. It is true for simple reads from an unused address. To still avoid the i2cdetect trouble which is the reason for commit c770657bd261 ("i2c: omap: Fix standard mode false ACK readings"), avoid doing much about NACK in omap_i2c_xfer_data() which is used by both IRQ mode and polling mode, so also the false detection fix is extended to polling usage and IRQ storms are avoided. By changing this, the hardirq handler is not needed anymore to filter stuff. The mentioned gyro reset now just causes a -ETIMEDOUT instead of hanging the system. Fixes: c770657bd261 ("i2c: omap: Fix standard mode false ACK readings"). CC: stable@kernel.org Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Tested-by: Nishanth Menon <nm@ti.com> Reviewed-by: Aniket Limaye <a-limaye@ti.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250228140420.379498-1-andreas@kemnade.info Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 285df995f90e3d61d97f327d34b9659d92313314 upstream.

On the GTA04A5 writing a reset command to the gyroscope causes IRQ
storms because NACK IRQs are enabled and therefore triggered but not
acked.

Sending a reset command to the gyroscope by
i2cset 1 0x69 0x14 0xb6
with an additional debug print in the ISR (not the thread) itself
causes

[ 363.353515] i2c i2c-1: ioctl, cmd=0x720, arg=0xbe801b00
[ 363.359039] omap_i2c 48072000.i2c: addr: 0x0069, len: 2, flags: 0x0, stop: 1
[ 363.366180] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x1110)
[ 363.371673] omap_i2c 48072000.i2c: IRQ (ISR = 0x0010)
[ 363.376892] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102)
[ 363.382263] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102)
[ 363.387664] omap_i2c 48072000.i2c: IRQ LL (ISR = 0x0102)
repeating till infinity
[...]
(0x2 = NACK, 0x100 = Bus free, which is not enabled)
Apparently no other IRQ bit gets set, so this stalls.

Do not ignore enabled interrupts and make sure they are acked.
If the NACK IRQ is not needed, it should simply not enabled, but
according to the above log, caring about it is necessary unless
the Bus free IRQ is enabled and handled. The assumption that is
will always come with a ARDY IRQ, which was the idea behind
ignoring it, proves wrong.
It is true for simple reads from an unused address.

To still avoid the i2cdetect trouble which is the reason for
commit c770657bd261 ("i2c: omap: Fix standard mode false ACK readings"),
avoid doing much about NACK in omap_i2c_xfer_data() which is used
by both IRQ mode and polling mode, so also the false detection fix
is extended to polling usage and IRQ storms are avoided.

By changing this, the hardirq handler is not needed anymore to filter
stuff.

The mentioned gyro reset now just causes a -ETIMEDOUT instead of
hanging the system.

Fixes: c770657bd261 ("i2c: omap: Fix standard mode false ACK readings").
CC: stable@kernel.org
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250228140420.379498-1-andreas@kemnade.info
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c: sis630: Fix an error handling path in sis630_probe() 2025-03-28T20:58:58+00:00 Christophe JAILLET christophe.jaillet@wanadoo.fr 2025-03-03T20:26:54+00:00 b801f524377de6f9ff1e7c0402f9636f3a3a8b5d [ Upstream commit 2b22459792fcb4def9f0936d64575ac11a95a58d ] If i2c_add_adapter() fails, the request_region() call in sis630_setup() must be undone by a corresponding release_region() call, as done in the remove function. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/3d607601f2c38e896b10207963c6ab499ca5c307.1741033587.git.christophe.jaillet@wanadoo.fr Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2b22459792fcb4def9f0936d64575ac11a95a58d ]

If i2c_add_adapter() fails, the request_region() call in sis630_setup()
must be undone by a corresponding release_region() call, as done in the
remove function.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/3d607601f2c38e896b10207963c6ab499ca5c307.1741033587.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: ali15x3: Fix an error handling path in ali15x3_probe() 2025-03-28T20:58:58+00:00 Christophe JAILLET christophe.jaillet@wanadoo.fr 2025-03-03T19:58:06+00:00 f5955987f4c60e461a248539ea924bde38792473 [ Upstream commit 6e55caaf30c88209d097e575a169b1dface1ab69 ] If i2c_add_adapter() fails, the request_region() call in ali15x3_setup() must be undone by a corresponding release_region() call, as done in the remove function. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/9b2090cbcc02659f425188ea05f2e02745c4e67b.1741031878.git.christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 6e55caaf30c88209d097e575a169b1dface1ab69 ]

If i2c_add_adapter() fails, the request_region() call in ali15x3_setup()
must be undone by a corresponding release_region() call, as done in the
remove function.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/9b2090cbcc02659f425188ea05f2e02745c4e67b.1741031878.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>