linux-stable.git/drivers/i2c, branch v5.2.7

i2c: at91: fix clk_offset for sama5d2

2019-08-06T17:08:17+00:00

commit b1ac6704493fa14b5dc19eb6b69a73932361a131 upstream.

In SAMA5D2 datasheet, TWIHS_CWGR register rescription mentions clock
offset of 3 cycles (compared to 4 in eg. SAMA5D3).

Cc: stable@vger.kernel.org # 5.2.x
[needs applying to i2c-at91.c instead for earlier kernels]
Fixes: 0ef6f3213dac ("i2c: at91: add support for new alternative command mode")
Signed-off-by: Michał Mirosław 
Acked-by: Ludovic Desroches 
Signed-off-by: Wolfram Sang 
Signed-off-by: Greg Kroah-Hartman

i2c: at91: disable TXRDY interrupt after sending data

2019-08-06T17:08:17+00:00

commit d12e3aae160fb26b534c4496b211d6e60a5179ed upstream.

Driver was not disabling TXRDY interrupt after last TX byte.
This caused interrupt storm until transfer timeouts for slow
or broken device on the bus. The patch fixes the interrupt storm
on my SAMA5D2-based board.

Cc: stable@vger.kernel.org # 5.2.x
[v5.2 introduced file split; the patch should apply to i2c-at91.c before the split]
Fixes: fac368a04048 ("i2c: at91: add new driver")
Signed-off-by: Michał Mirosław 
Acked-by: Ludovic Desroches 
Tested-by: Raag Jadav 
Signed-off-by: Wolfram Sang 
Signed-off-by: Greg Kroah-Hartman

i2c: iproc: Fix i2c master read more than 63 bytes

2019-08-06T17:08:16+00:00

commit fd01eecdf9591453177d7b06faaabef8c300114a upstream.

Use SMBUS_MASTER_DATA_READ.MASTER_RD_STATUS bit to check for RX
FIFO empty condition because SMBUS_MASTER_FIFO_CONTROL.MASTER_RX_PKT_COUNT
is not updated for read >= 64 bytes. This fixes the issue when trying to
read from the I2C slave more than 63 bytes.

Fixes: c24b8d574b7c ("i2c: iproc: Extend I2C read up to 255 bytes")
Cc: stable@kernel.org
Signed-off-by: Rayagonda Kokatanur 
Reviewed-by: Ray Jui 
Signed-off-by: Wolfram Sang 
Signed-off-by: Greg Kroah-Hartman

i2c: stm32f7: fix the get_irq error cases

2019-07-31T05:24:43+00:00

[ Upstream commit 79b4499524ed659fb76323efc30f3dc03967c88f ]

During probe, return the "get_irq" error value instead of -EINVAL which
allows the driver to be deferred probed if needed.
Fix also the case where of_irq_get() returns a negative value.
Note :
On failure of_irq_get() returns 0 or a negative value while
platform_get_irq() returns a negative value.

Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver")
Reviewed-by: Pierre-Yves MORDRET 
Signed-off-by: Fabien Dessenne 
Signed-off-by: Fabrice Gasnier 
Signed-off-by: Wolfram Sang 
Signed-off-by: Sasha Levin

i2c: nvidia-gpu: resume ccgx i2c client

2019-07-31T05:24:37+00:00

[ Upstream commit 9f2e244d0a39eb437f98324ac315e605e48636db ]

Cypress USB Type-C CCGx controller firmware version 3.1.10
(which is being used in many NVIDIA GPU cards) has known issue of
not triggering interrupt when a USB device is hot plugged to runtime
resume the controller. If any GPU card gets latest kernel with runtime
pm support but does not get latest fixed firmware then also it should
continue to work and therefore a workaround is required to check for
any connector change event

The workaround is to request runtime resume of i2c client
which is UCSI Cypress CCGx driver. CCG driver will call the ISR
for any connector change event only if NVIDIA GPU has old
CCG firmware with the known issue.

Signed-off-by: Ajay Gupta 
Signed-off-by: Wolfram Sang 
Signed-off-by: Sasha Levin

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Enrico Weigelt 
Reviewed-by: Kate Stewart 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 462

2019-06-19T15:09:10+00:00

Based on 1 normalized pattern(s):

  license gpl v2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 1 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Enrico Weigelt 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081202.146070292@linutronix.de
Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 235

2019-06-19T15:09:07+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 53 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Allison Randal 
Reviewed-by: Alexios Zavras 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.904365654@linutronix.de
Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 233

2019-06-19T15:09:06+00:00

Based on 1 normalized pattern(s):

  this software is licensed under the terms of the gnu general public
  license version 2 as published by the free software foundation and
  may be copied distributed and modified under those terms

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 6 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Alexios Zavras 
Reviewed-by: Allison Randal 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.720704315@linutronix.de
Signed-off-by: Greg Kroah-Hartman

i2c: pca-platform: Fix GPIO lookup code

2019-06-12T10:54:06+00:00

The devm_gpiod_request_gpiod() call will add "-gpios" to
any passed connection ID before looking it up.

I do not think the reset GPIO on this platform is named
"reset-gpios-gpios" but rather "reset-gpios" in the device
tree, so fix this up so that we get a proper reset GPIO
handle.

Also drop the inclusion of the legacy GPIO header.

Fixes: 0e8ce93bdceb ("i2c: pca-platform: add devicetree awareness")
Signed-off-by: Linus Walleij 
Reviewed-by: Chris Packham 
Signed-off-by: Wolfram Sang