linux-stable.git/drivers/i2c, branch v4.14.321 Linux kernel stable tree i2c: imx-lpi2c: fix type char overflow issue when calculating the clock cycle 2023-06-28T08:14:21+00:00 Clark Wang xiaoning.wang@nxp.com 2023-05-29T08:02:51+00:00 8224a830aea8de4497b91600e2aa515b6f81274f [ Upstream commit e69b9bc170c6d93ee375a5cbfd15f74c0fb59bdd ] Claim clkhi and clklo as integer type to avoid possible calculation errors caused by data overflow. Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver") Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Signed-off-by: Carlos Song <carlos.song@nxp.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e69b9bc170c6d93ee375a5cbfd15f74c0fb59bdd ]

Claim clkhi and clklo as integer type to avoid possible calculation
errors caused by data overflow.

Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: sprd: Delete i2c adapter in .remove's error path 2023-06-14T08:35:26+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2023-03-09T09:58:19+00:00 5fe38021b2154fc03b552bbc10316c800dd23c51 [ Upstream commit ca0aa17f2db3468fd017038d23a78e17388e2f67 ] If pm runtime resume fails the .remove callback used to exit early. This resulted in an error message by the driver core but the device gets removed anyhow. This lets the registered i2c adapter stay around with an unbound parent device. So only skip clk disabling if resume failed, but do delete the adapter. Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ca0aa17f2db3468fd017038d23a78e17388e2f67 ]

If pm runtime resume fails the .remove callback used to exit early. This
resulted in an error message by the driver core but the device gets
removed anyhow. This lets the registered i2c adapter stay around with an
unbound parent device.

So only skip clk disabling if resume failed, but do delete the adapter.

Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: omap: Fix standard mode false ACK readings 2023-05-17T09:11:39+00:00 Reid Tonking reidt@ti.com 2023-04-26T19:49:56+00:00 998080b96071a63e5c9ce14836351bfc0298609d commit c770657bd2611b077ec1e7b1fe6aa92f249399bd upstream. Using standard mode, rare false ACK responses were appearing with i2cdetect tool. This was happening due to NACK interrupt triggering ISR thread before register access interrupt was ready. Removing the NACK interrupt's ability to trigger ISR thread lets register access ready interrupt do this instead. Cc: <stable@vger.kernel.org> # v3.7+ Fixes: 3b2f8f82dad7 ("i2c: omap: switch to threaded IRQ support") Signed-off-by: Reid Tonking <reidt@ti.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c770657bd2611b077ec1e7b1fe6aa92f249399bd upstream.

Using standard mode, rare false ACK responses were appearing with
i2cdetect tool. This was happening due to NACK interrupt triggering
ISR thread before register access interrupt was ready. Removing the
NACK interrupt's ability to trigger ISR thread lets register access
ready interrupt do this instead.

Cc: <stable@vger.kernel.org> # v3.7+
Fixes: 3b2f8f82dad7 ("i2c: omap: switch to threaded IRQ support")
Signed-off-by: Reid Tonking <reidt@ti.com>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c: imx-lpi2c: clean rx/tx buffers upon new message 2023-04-20T10:02:12+00:00 Alexander Stein alexander.stein@ew.tq-group.com 2023-01-30T15:32:46+00:00 5b447120c05268349369e1ce736226126ea83ce0 [ Upstream commit 987dd36c0141f6ab9f0fbf14d6b2ec3342dedb2f ] When start sending a new message clear the Rx & Tx buffer pointers in order to avoid using stale pointers. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Tested-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 987dd36c0141f6ab9f0fbf14d6b2ec3342dedb2f ]

When start sending a new message clear the Rx & Tx buffer pointers in
order to avoid using stale pointers.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: xgene-slimpro: Fix out-of-bounds bug in xgene_slimpro_i2c_xfer() 2023-04-05T09:14:18+00:00 Wei Chen harperchen1110@gmail.com 2023-03-14T16:54:21+00:00 b8cb50c68c87f2c4a1d65df9275073e9c94aef5e commit 92fbb6d1296f81f41f65effd7f5f8c0f74943d15 upstream. The data->block[0] variable comes from user and is a number between 0-255. Without proper check, the variable may be very large to cause an out-of-bounds when performing memcpy in slimpro_i2c_blkwr. Fix this bug by checking the value of writelen. Fixes: f6505fbabc42 ("i2c: add SLIMpro I2C device driver on APM X-Gene platform") Signed-off-by: Wei Chen <harperchen1110@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 92fbb6d1296f81f41f65effd7f5f8c0f74943d15 upstream.

The data->block[0] variable comes from user and is a number between
0-255. Without proper check, the variable may be very large to cause
an out-of-bounds when performing memcpy in slimpro_i2c_blkwr.

Fix this bug by checking the value of writelen.

Fixes: f6505fbabc42 ("i2c: add SLIMpro I2C device driver on APM X-Gene platform")
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c: imx-lpi2c: check only for enabled interrupt flags 2023-04-05T09:14:14+00:00 Alexander Stein alexander.stein@ew.tq-group.com 2023-01-30T15:32:47+00:00 34b179b1d7f0c0739b01bc9549b857e074c22fd9 [ Upstream commit 1c7885004567e8951d65a983be095f254dd20bef ] When reading from I2C, the Tx watermark is set to 0. Unfortunately the TDF (transmit data flag) is enabled when Tx FIFO entries is equal or less than watermark. So it is set in every case, hence the reset default of 1. This results in the MSR_RDF _and_ MSR_TDF flags to be set thus trying to send Tx data on a read message. Mask the IRQ status to filter for wanted flags only. Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Tested-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1c7885004567e8951d65a983be095f254dd20bef ]

When reading from I2C, the Tx watermark is set to 0. Unfortunately the
TDF (transmit data flag) is enabled when Tx FIFO entries is equal or less
than watermark. So it is set in every case, hence the reset default of 1.
This results in the MSR_RDF _and_ MSR_TDF flags to be set thus trying
to send Tx data on a read message.
Mask the IRQ status to filter for wanted flags only.

Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: ismt: Fix an out-of-bounds bug in ismt_access() 2023-01-18T08:26:25+00:00 Zheyu Ma zheyuma97@gmail.com 2022-07-29T11:02:16+00:00 03b7ef7a6c5ca1ff553470166b4919db88b810f6 [ Upstream commit 39244cc754829bf707dccd12e2ce37510f5b1f8d ] When the driver does not check the data from the user, the variable 'data->block[0]' may be very large to cause an out-of-bounds bug. The following log can reveal it: [ 33.995542] i2c i2c-1: ioctl, cmd=0x720, arg=0x7ffcb3dc3a20 [ 33.995978] ismt_smbus 0000:00:05.0: I2C_SMBUS_BLOCK_DATA: WRITE [ 33.996475] ================================================================== [ 33.996995] BUG: KASAN: out-of-bounds in ismt_access.cold+0x374/0x214b [ 33.997473] Read of size 18446744073709551615 at addr ffff88810efcfdb1 by task ismt_poc/485 [ 33.999450] Call Trace: [ 34.001849] memcpy+0x20/0x60 [ 34.002077] ismt_access.cold+0x374/0x214b [ 34.003382] __i2c_smbus_xfer+0x44f/0xfb0 [ 34.004007] i2c_smbus_xfer+0x10a/0x390 [ 34.004291] i2cdev_ioctl_smbus+0x2c8/0x710 [ 34.005196] i2cdev_ioctl+0x5ec/0x74c Fix this bug by checking the size of 'data->block[0]' first. Fixes: 13f35ac14cd0 ("i2c: Adding support for Intel iSMT SMBus 2.0 host controller") Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 39244cc754829bf707dccd12e2ce37510f5b1f8d ]

When the driver does not check the data from the user, the variable
'data->block[0]' may be very large to cause an out-of-bounds bug.

The following log can reveal it:

[   33.995542] i2c i2c-1: ioctl, cmd=0x720, arg=0x7ffcb3dc3a20
[   33.995978] ismt_smbus 0000:00:05.0: I2C_SMBUS_BLOCK_DATA:  WRITE
[   33.996475] ==================================================================
[   33.996995] BUG: KASAN: out-of-bounds in ismt_access.cold+0x374/0x214b
[   33.997473] Read of size 18446744073709551615 at addr ffff88810efcfdb1 by task ismt_poc/485
[   33.999450] Call Trace:
[   34.001849]  memcpy+0x20/0x60
[   34.002077]  ismt_access.cold+0x374/0x214b
[   34.003382]  __i2c_smbus_xfer+0x44f/0xfb0
[   34.004007]  i2c_smbus_xfer+0x10a/0x390
[   34.004291]  i2cdev_ioctl_smbus+0x2c8/0x710
[   34.005196]  i2cdev_ioctl+0x5ec/0x74c

Fix this bug by checking the size of 'data->block[0]' first.

Fixes: 13f35ac14cd0 ("i2c: Adding support for Intel iSMT SMBus 2.0 host controller")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe 2023-01-18T08:26:25+00:00 Hui Tang tanghui20@huawei.com 2022-11-14T09:25:40+00:00 580f4556ab32057a5fecdc04895ac1be70fc39c7 [ Upstream commit d78a167332e1ca8113268ed922c1212fd71b73ad ] Using pcim_enable_device() to avoid missing pci_disable_device(). Fixes: 7e94dd154e93 ("i2c-pxa2xx: Add PCI support for PXA I2C controller") Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit d78a167332e1ca8113268ed922c1212fd71b73ad ]

Using pcim_enable_device() to avoid missing pci_disable_device().

Fixes: 7e94dd154e93 ("i2c-pxa2xx: Add PCI support for PXA I2C controller")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: xiic: Add platform module alias 2022-11-10T14:47:22+00:00 Martin Tůma martin.tuma@digiteqautomotive.com 2022-10-18T14:03:37+00:00 eb0393cdccfcd56dd35c5965e1f416d6d19e143e [ Upstream commit b8caf0a0e04583fb71e21495bef84509182227ea ] The missing "platform" alias is required for the mgb4 v4l2 driver to load the i2c controller driver when probing the HW. Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com> Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b8caf0a0e04583fb71e21495bef84509182227ea ]

The missing "platform" alias is required for the mgb4 v4l2 driver to load
the i2c controller driver when probing the HW.

Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: dev: prevent ZERO_SIZE_PTR deref in i2cdev_ioctl_rdwr() 2022-10-26T11:16:51+00:00 Alexander Popov alex.popov@linux.com 2018-04-19T12:29:22+00:00 dc76815698d63016284aef22b69aefb006489418 commit 23a27722b5292ef0b27403c87a109feea8296a5c upstream. i2cdev_ioctl_rdwr() allocates i2c_msg.buf using memdup_user(), which returns ZERO_SIZE_PTR if i2c_msg.len is zero. Currently i2cdev_ioctl_rdwr() always dereferences the buf pointer in case of I2C_M_RD | I2C_M_RECV_LEN transfer. That causes a kernel oops in case of zero len. Let's check the len against zero before dereferencing buf pointer. This issue was triggered by syzkaller. Signed-off-by: Alexander Popov <alex.popov@linux.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [wsa: use '< 1' instead of '!' for easier readability] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> [Harshit: backport to 4.14.y, use rdwr_pa[i].len instead of msgs[i].len as the 4.14.y code uses rdwr_pa.] Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 23a27722b5292ef0b27403c87a109feea8296a5c upstream.

i2cdev_ioctl_rdwr() allocates i2c_msg.buf using memdup_user(), which
returns ZERO_SIZE_PTR if i2c_msg.len is zero.

Currently i2cdev_ioctl_rdwr() always dereferences the buf pointer in case
of I2C_M_RD | I2C_M_RECV_LEN transfer. That causes a kernel oops in
case of zero len.

Let's check the len against zero before dereferencing buf pointer.

This issue was triggered by syzkaller.

Signed-off-by: Alexander Popov <alex.popov@linux.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[wsa: use '< 1' instead of '!' for easier readability]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
[Harshit: backport to 4.14.y, use rdwr_pa[i].len instead of msgs[i].len
as the 4.14.y  code uses rdwr_pa.]
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>