linux-stable.git/drivers/i2c, branch linux-5.4.y Linux kernel stable tree i2c: designware: Add disabling clocks when probe fails 2025-10-29T12:59:47+00:00 Kunihiko Hayashi hayashi.kunihiko@socionext.com 2025-07-24T04:22:11+00:00 46b35621d66945070adb9e713b07629e43adbfe3 [ Upstream commit c149841b069ccc6e480b00e11f35a57b5d88c7bb ] After an error occurs during probing state, dw_i2c_plat_pm_cleanup() is called. However, this function doesn't disable clocks and the clock-enable count keeps increasing. Should disable these clocks explicitly. Fixes: 7272194ed391f ("i2c-designware: add minimal support for runtime PM") Co-developed-by: Kohei Ito <ito.kohei@socionext.com> Signed-off-by: Kohei Ito <ito.kohei@socionext.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c149841b069ccc6e480b00e11f35a57b5d88c7bb ]

After an error occurs during probing state, dw_i2c_plat_pm_cleanup() is
called. However, this function doesn't disable clocks and the clock-enable
count keeps increasing. Should disable these clocks explicitly.

Fixes: 7272194ed391f ("i2c-designware: add minimal support for runtime PM")
Co-developed-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: mediatek: fix potential incorrect use of I2C_MASTER_WRRD 2025-10-29T12:59:46+00:00 Leilk.Liu leilk.liu@mediatek.com 2025-09-06T08:24:06+00:00 7dc48c447a24efc4e044c55848badf8610eef788 [ Upstream commit b492183652808e0f389272bf63dc836241b287ff ] The old IC does not support the I2C_MASTER_WRRD (write-then-read) function, but the current code’s handling of i2c->auto_restart may potentially lead to entering the I2C_MASTER_WRRD software flow, resulting in unexpected bugs. Instead of repurposing the auto_restart flag, add a separate flag to signal I2C_MASTER_WRRD operations. Also fix handling of msgs. If the operation (i2c->op) is I2C_MASTER_WRRD, then the msgs pointer is incremented by 2. For all other operations, msgs is simply incremented by 1. Fixes: b2ed11e224a2 ("I2C: mediatek: Add driver for MediaTek MT8173 I2C controller") Signed-off-by: Leilk.Liu <leilk.liu@mediatek.com> Suggested-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b492183652808e0f389272bf63dc836241b287ff ]

The old IC does not support the I2C_MASTER_WRRD (write-then-read)
function, but the current code’s handling of i2c->auto_restart may
potentially lead to entering the I2C_MASTER_WRRD software flow,
resulting in unexpected bugs.

Instead of repurposing the auto_restart flag, add a separate flag
to signal I2C_MASTER_WRRD operations.

Also fix handling of msgs. If the operation (i2c->op) is
I2C_MASTER_WRRD, then the msgs pointer is incremented by 2.
For all other operations, msgs is simply incremented by 1.

Fixes: b2ed11e224a2 ("I2C: mediatek: Add driver for MediaTek MT8173 I2C controller")
Signed-off-by: Leilk.Liu <leilk.liu@mediatek.com>
Suggested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: qup: jump out of the loop in case of timeout 2025-08-28T14:21:17+00:00 Yang Xiwen forbidden405@outlook.com 2025-06-15T16:01:10+00:00 cbec4406998185e0311ae97dfacc649f9cd79b0b commit a7982a14b3012527a9583d12525cd0dc9f8d8934 upstream. Original logic only sets the return value but doesn't jump out of the loop if the bus is kept active by a client. This is not expected. A malicious or buggy i2c client can hang the kernel in this case and should be avoided. This is observed during a long time test with a PCA953x GPIO extender. Fix it by changing the logic to not only sets the return value, but also jumps out of the loop and return to the caller with -ETIMEDOUT. Fixes: fbfab1ab0658 ("i2c: qup: reorganization of driver code to remove polling for qup v1") Signed-off-by: Yang Xiwen <forbidden405@outlook.com> Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250616-qca-i2c-v1-1-2a8d37ee0a30@outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a7982a14b3012527a9583d12525cd0dc9f8d8934 upstream.

Original logic only sets the return value but doesn't jump out of the
loop if the bus is kept active by a client. This is not expected. A
malicious or buggy i2c client can hang the kernel in this case and
should be avoided. This is observed during a long time test with a
PCA953x GPIO extender.

Fix it by changing the logic to not only sets the return value, but also
jumps out of the loop and return to the caller with -ETIMEDOUT.

Fixes: fbfab1ab0658 ("i2c: qup: reorganization of driver code to remove polling for qup v1")
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Cc: <stable@vger.kernel.org> # v4.17+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250616-qca-i2c-v1-1-2a8d37ee0a30@outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c: stm32: fix the device used for the DMA map 2025-08-28T14:21:14+00:00 Clément Le Goffic clement.legoffic@foss.st.com 2025-07-04T08:39:14+00:00 e64ec9509c1ed56080063f3e976764503717e7c4 commit c870cbbd71fccda71d575f0acd4a8d2b7cd88861 upstream. If the DMA mapping failed, it produced an error log with the wrong device name: "stm32-dma3 40400000.dma-controller: rejecting DMA map of vmalloc memory" Fix this issue by replacing the dev with the I2C dev. Fixes: bb8822cbbc53 ("i2c: i2c-stm32: Add generic DMA API") Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com> Cc: <stable@vger.kernel.org> # v4.18+ Acked-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250704-i2c-upstream-v4-1-84a095a2c728@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c870cbbd71fccda71d575f0acd4a8d2b7cd88861 upstream.

If the DMA mapping failed, it produced an error log with the wrong
device name:
"stm32-dma3 40400000.dma-controller: rejecting DMA map of vmalloc memory"
Fix this issue by replacing the dev with the I2C dev.

Fixes: bb8822cbbc53 ("i2c: i2c-stm32: Add generic DMA API")
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: <stable@vger.kernel.org> # v4.18+
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250704-i2c-upstream-v4-1-84a095a2c728@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c: robotfuzz-osif: disable zero-length read messages 2025-07-17T16:24:53+00:00 Wolfram Sang wsa+renesas@sang-engineering.com 2025-05-22T06:42:35+00:00 585be561e512b91622c2b965d0d0cb67f279a2df commit 56ad91c1aa9c18064348edf69308080b03c9dc48 upstream. This driver passes the length of an i2c_msg directly to usb_control_msg(). If the message is now a read and of length 0, it violates the USB protocol and a warning will be printed. Enable the I2C_AQ_NO_ZERO_LEN_READ quirk for this adapter thus forbidding 0-length read messages altogether. Fixes: 83e53a8f120f ("i2c: Add bus driver for for OSIF USB i2c device.") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250522064234.3721-2-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 56ad91c1aa9c18064348edf69308080b03c9dc48 upstream.

This driver passes the length of an i2c_msg directly to
usb_control_msg(). If the message is now a read and of length 0, it
violates the USB protocol and a warning will be printed. Enable the
I2C_AQ_NO_ZERO_LEN_READ quirk for this adapter thus forbidding 0-length
read messages altogether.

Fixes: 83e53a8f120f ("i2c: Add bus driver for for OSIF USB i2c device.")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250522064234.3721-2-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c: tiny-usb: disable zero-length read messages 2025-07-17T16:24:53+00:00 Wolfram Sang wsa+renesas@sang-engineering.com 2025-05-22T06:43:49+00:00 e34167aee4e10692b4bcb8716bb012da19ba00d4 commit cbdb25ccf7566eee0c2b945e35cb98baf9ed0aa6 upstream. This driver passes the length of an i2c_msg directly to usb_control_msg(). If the message is now a read and of length 0, it violates the USB protocol and a warning will be printed. Enable the I2C_AQ_NO_ZERO_LEN_READ quirk for this adapter thus forbidding 0-length read messages altogether. Fixes: e8c76eed2ecd ("i2c: New i2c-tiny-usb bus driver") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: <stable@vger.kernel.org> # v2.6.22+ Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250522064349.3823-2-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cbdb25ccf7566eee0c2b945e35cb98baf9ed0aa6 upstream.

This driver passes the length of an i2c_msg directly to
usb_control_msg(). If the message is now a read and of length 0, it
violates the USB protocol and a warning will be printed. Enable the
I2C_AQ_NO_ZERO_LEN_READ quirk for this adapter thus forbidding 0-length
read messages altogether.

Fixes: e8c76eed2ecd ("i2c: New i2c-tiny-usb bus driver")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: <stable@vger.kernel.org> # v2.6.22+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250522064349.3823-2-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c: designware: Invoke runtime suspend on quick slave re-registration 2025-06-27T10:02:54+00:00 Tan En De ende.tan@starfivetech.com 2025-04-12T02:33:03+00:00 aa588740e35866ae6bd84ee78a63f5fbb360fe46 [ Upstream commit 2fe2b969d911a09abcd6a47401a3c66c38a310e6 ] Replaced pm_runtime_put() with pm_runtime_put_sync_suspend() to ensure the runtime suspend is invoked immediately when unregistering a slave. This prevents a race condition where suspend was skipped when unregistering and registering slave in quick succession. For example, consider the rapid sequence of `delete_device -> new_device -> delete_device -> new_device`. In this sequence, it is observed that the dw_i2c_plat_runtime_suspend() might not be invoked after `delete_device` operation. This is because after `delete_device` operation, when the pm_runtime_put() is about to trigger suspend, the following `new_device` operation might race and cancel the suspend. If that happens, during the `new_device` operation, dw_i2c_plat_runtime_resume() is skipped (since there was no suspend), which means `i_dev->init()`, i.e. i2c_dw_init_slave(), is skipped. Since i2c_dw_init_slave() is skipped, i2c_dw_configure_fifo_slave() is skipped too, which leaves `DW_IC_INTR_MASK` unconfigured. If we inspect the interrupt mask register using devmem, it will show as zero. Example shell script to reproduce the issue: ``` #!/bin/sh SLAVE_LADDR=0x1010 SLAVE_BUS=13 NEW_DEVICE=/sys/bus/i2c/devices/i2c-$SLAVE_BUS/new_device DELETE_DEVICE=/sys/bus/i2c/devices/i2c-$SLAVE_BUS/delete_device # Create initial device echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE sleep 2 # Rapid sequence of # delete_device -> new_device -> delete_device -> new_device echo $SLAVE_LADDR > $DELETE_DEVICE echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE echo $SLAVE_LADDR > $DELETE_DEVICE echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE # Using devmem to inspect IC_INTR_MASK will show as zero ``` Signed-off-by: Tan En De <ende.tan@starfivetech.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20250412023303.378600-1-ende.tan@starfivetech.com Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2fe2b969d911a09abcd6a47401a3c66c38a310e6 ]

Replaced pm_runtime_put() with pm_runtime_put_sync_suspend() to ensure
the runtime suspend is invoked immediately when unregistering a slave.
This prevents a race condition where suspend was skipped when
unregistering and registering slave in quick succession.

For example, consider the rapid sequence of
`delete_device -> new_device -> delete_device -> new_device`.
In this sequence, it is observed that the dw_i2c_plat_runtime_suspend()
might not be invoked after `delete_device` operation.

This is because after `delete_device` operation, when the
pm_runtime_put() is about to trigger suspend, the following `new_device`
operation might race and cancel the suspend.

If that happens, during the `new_device` operation,
dw_i2c_plat_runtime_resume() is skipped (since there was no suspend), which
means `i_dev->init()`, i.e. i2c_dw_init_slave(), is skipped.
Since i2c_dw_init_slave() is skipped, i2c_dw_configure_fifo_slave() is
skipped too, which leaves `DW_IC_INTR_MASK` unconfigured. If we inspect
the interrupt mask register using devmem, it will show as zero.

Example shell script to reproduce the issue:
```
  #!/bin/sh

  SLAVE_LADDR=0x1010
  SLAVE_BUS=13
  NEW_DEVICE=/sys/bus/i2c/devices/i2c-$SLAVE_BUS/new_device
  DELETE_DEVICE=/sys/bus/i2c/devices/i2c-$SLAVE_BUS/delete_device

  # Create initial device
  echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE
  sleep 2

  # Rapid sequence of
  # delete_device -> new_device -> delete_device -> new_device
  echo $SLAVE_LADDR > $DELETE_DEVICE
  echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE
  echo $SLAVE_LADDR > $DELETE_DEVICE
  echo slave-24c02 $SLAVE_LADDR > $NEW_DEVICE

  # Using devmem to inspect IC_INTR_MASK will show as zero
```

Signed-off-by: Tan En De <ende.tan@starfivetech.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20250412023303.378600-1-ende.tan@starfivetech.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: pxa: fix call balance of i2c->clk handling routines 2025-06-04T12:32:30+00:00 Vitalii Mordan mordan@ispras.ru 2025-02-12T17:28:03+00:00 1fb065f237d8f4c2ed53f221fd4b0d6669a09fdf [ Upstream commit be7113d2e2a6f20cbee99c98d261a1fd6fd7b549 ] If the clock i2c->clk was not enabled in i2c_pxa_probe(), it should not be disabled in any path. Found by Linux Verification Center (linuxtesting.org) with Klever. Signed-off-by: Vitalii Mordan <mordan@ispras.ru> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250212172803.1422136-1-mordan@ispras.ru Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit be7113d2e2a6f20cbee99c98d261a1fd6fd7b549 ]

If the clock i2c->clk was not enabled in i2c_pxa_probe(), it should not be
disabled in any path.

Found by Linux Verification Center (linuxtesting.org) with Klever.

Signed-off-by: Vitalii Mordan <mordan@ispras.ru>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250212172803.1422136-1-mordan@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
i2c: imx-lpi2c: Fix clock count when probe defers 2025-06-04T12:32:24+00:00 Clark Wang xiaoning.wang@nxp.com 2025-04-21T06:23:41+00:00 a4e8f24422187eb48ebbdc915d0146e98cc9c6c7 commit b1852c5de2f2a37dd4462f7837c9e3e678f9e546 upstream. Deferred probe with pm_runtime_put() may delay clock disable, causing incorrect clock usage count. Use pm_runtime_put_sync() to ensure the clock is disabled immediately. Fixes: 13d6eb20fc79 ("i2c: imx-lpi2c: add runtime pm support") Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Signed-off-by: Carlos Song <carlos.song@nxp.com> Cc: <stable@vger.kernel.org> # v4.16+ Link: https://lore.kernel.org/r/20250421062341.2471922-1-carlos.song@nxp.com Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b1852c5de2f2a37dd4462f7837c9e3e678f9e546 upstream.

Deferred probe with pm_runtime_put() may delay clock disable, causing
incorrect clock usage count. Use pm_runtime_put_sync() to ensure the
clock is disabled immediately.

Fixes: 13d6eb20fc79 ("i2c: imx-lpi2c: add runtime pm support")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Cc: <stable@vger.kernel.org> # v4.16+
Link: https://lore.kernel.org/r/20250421062341.2471922-1-carlos.song@nxp.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c: cros-ec-tunnel: defer probe if parent EC is not present 2025-05-02T05:39:20+00:00 Thadeu Lima de Souza Cascardo cascardo@igalia.com 2025-04-07T20:33:34+00:00 092de5ac8cb2eaa9593a765fa92ba39d8173f984 commit 424eafe65647a8d6c690284536e711977153195a upstream. When i2c-cros-ec-tunnel and the EC driver are built-in, the EC parent device will not be found, leading to NULL pointer dereference. That can also be reproduced by unbinding the controller driver and then loading i2c-cros-ec-tunnel module (or binding the device). [ 271.991245] BUG: kernel NULL pointer dereference, address: 0000000000000058 [ 271.998215] #PF: supervisor read access in kernel mode [ 272.003351] #PF: error_code(0x0000) - not-present page [ 272.008485] PGD 0 P4D 0 [ 272.011022] Oops: Oops: 0000 [#1] SMP NOPTI [ 272.015207] CPU: 0 UID: 0 PID: 3859 Comm: insmod Tainted: G S 6.15.0-rc1-00004-g44722359ed83 #30 PREEMPT(full) 3c7fb39a552e7d949de2ad921a7d6588d3a4fdc5 [ 272.030312] Tainted: [S]=CPU_OUT_OF_SPEC [ 272.034233] Hardware name: HP Berknip/Berknip, BIOS Google_Berknip.13434.356.0 05/17/2021 [ 272.042400] RIP: 0010:ec_i2c_probe+0x2b/0x1c0 [i2c_cros_ec_tunnel] [ 272.048577] Code: 1f 44 00 00 41 57 41 56 41 55 41 54 53 48 83 ec 10 65 48 8b 05 06 a0 6c e7 48 89 44 24 08 4c 8d 7f 10 48 8b 47 50 4c 8b 60 78 <49> 83 7c 24 58 00 0f 84 2f 01 00 00 48 89 fb be 30 06 00 00 4c 9 [ 272.067317] RSP: 0018:ffffa32082a03940 EFLAGS: 00010282 [ 272.072541] RAX: ffff969580b6a810 RBX: ffff969580b68c10 RCX: 0000000000000000 [ 272.079672] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff969580b68c00 [ 272.086804] RBP: 00000000fffffdfb R08: 0000000000000000 R09: 0000000000000000 [ 272.093936] R10: 0000000000000000 R11: ffffffffc0600000 R12: 0000000000000000 [ 272.101067] R13: ffffffffa666fbb8 R14: ffffffffc05b5528 R15: ffff969580b68c10 [ 272.108198] FS: 00007b930906fc40(0000) GS:ffff969603149000(0000) knlGS:0000000000000000 [ 272.116282] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 272.122024] CR2: 0000000000000058 CR3: 000000012631c000 CR4: 00000000003506f0 [ 272.129155] Call Trace: [ 272.131606] <TASK> [ 272.133709] ? acpi_dev_pm_attach+0xdd/0x110 [ 272.137985] platform_probe+0x69/0xa0 [ 272.141652] really_probe+0x152/0x310 [ 272.145318] __driver_probe_device+0x77/0x110 [ 272.149678] driver_probe_device+0x1e/0x190 [ 272.153864] __driver_attach+0x10b/0x1e0 [ 272.157790] ? driver_attach+0x20/0x20 [ 272.161542] bus_for_each_dev+0x107/0x150 [ 272.165553] bus_add_driver+0x15d/0x270 [ 272.169392] driver_register+0x65/0x110 [ 272.173232] ? cleanup_module+0xa80/0xa80 [i2c_cros_ec_tunnel 3a00532f3f4af4a9eade753f86b0f8dd4e4e5698] [ 272.182617] do_one_initcall+0x110/0x350 [ 272.186543] ? security_kernfs_init_security+0x49/0xd0 [ 272.191682] ? __kernfs_new_node+0x1b9/0x240 [ 272.195954] ? security_kernfs_init_security+0x49/0xd0 [ 272.201093] ? __kernfs_new_node+0x1b9/0x240 [ 272.205365] ? kernfs_link_sibling+0x105/0x130 [ 272.209810] ? kernfs_next_descendant_post+0x1c/0xa0 [ 272.214773] ? kernfs_activate+0x57/0x70 [ 272.218699] ? kernfs_add_one+0x118/0x160 [ 272.222710] ? __kernfs_create_file+0x71/0xa0 [ 272.227069] ? sysfs_add_bin_file_mode_ns+0xd6/0x110 [ 272.232033] ? internal_create_group+0x453/0x4a0 [ 272.236651] ? __vunmap_range_noflush+0x214/0x2d0 [ 272.241355] ? __free_frozen_pages+0x1dc/0x420 [ 272.245799] ? free_vmap_area_noflush+0x10a/0x1c0 [ 272.250505] ? load_module+0x1509/0x16f0 [ 272.254431] do_init_module+0x60/0x230 [ 272.258181] __se_sys_finit_module+0x27a/0x370 [ 272.262627] do_syscall_64+0x6a/0xf0 [ 272.266206] ? do_syscall_64+0x76/0xf0 [ 272.269956] ? irqentry_exit_to_user_mode+0x79/0x90 [ 272.274836] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 272.279887] RIP: 0033:0x7b9309168d39 [ 272.283466] Code: 5b 41 5c 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d af 40 0c 00 f7 d8 64 89 01 8 [ 272.302210] RSP: 002b:00007fff50f1a288 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 272.309774] RAX: ffffffffffffffda RBX: 000058bf9b50f6d0 RCX: 00007b9309168d39 [ 272.316905] RDX: 0000000000000000 RSI: 000058bf6c103a77 RDI: 0000000000000003 [ 272.324036] RBP: 00007fff50f1a2e0 R08: 00007fff50f19218 R09: 0000000021ec4150 [ 272.331166] R10: 000058bf9b50f7f0 R11: 0000000000000246 R12: 0000000000000000 [ 272.338296] R13: 00000000fffffffe R14: 0000000000000000 R15: 000058bf6c103a77 [ 272.345428] </TASK> [ 272.347617] Modules linked in: i2c_cros_ec_tunnel(+) [ 272.364585] gsmi: Log Shutdown Reason 0x03 Returning -EPROBE_DEFER will allow the device to be bound once the controller is bound, in the case of built-in drivers. Fixes: 9d230c9e4f4e ("i2c: ChromeOS EC tunnel driver") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250407-null-ec-parent-v1-1-f7dda62d3110@igalia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 424eafe65647a8d6c690284536e711977153195a upstream.

When i2c-cros-ec-tunnel and the EC driver are built-in, the EC parent
device will not be found, leading to NULL pointer dereference.

That can also be reproduced by unbinding the controller driver and then
loading i2c-cros-ec-tunnel module (or binding the device).

[  271.991245] BUG: kernel NULL pointer dereference, address: 0000000000000058
[  271.998215] #PF: supervisor read access in kernel mode
[  272.003351] #PF: error_code(0x0000) - not-present page
[  272.008485] PGD 0 P4D 0
[  272.011022] Oops: Oops: 0000 [#1] SMP NOPTI
[  272.015207] CPU: 0 UID: 0 PID: 3859 Comm: insmod Tainted: G S                  6.15.0-rc1-00004-g44722359ed83 #30 PREEMPT(full)  3c7fb39a552e7d949de2ad921a7d6588d3a4fdc5
[  272.030312] Tainted: [S]=CPU_OUT_OF_SPEC
[  272.034233] Hardware name: HP Berknip/Berknip, BIOS Google_Berknip.13434.356.0 05/17/2021
[  272.042400] RIP: 0010:ec_i2c_probe+0x2b/0x1c0 [i2c_cros_ec_tunnel]
[  272.048577] Code: 1f 44 00 00 41 57 41 56 41 55 41 54 53 48 83 ec 10 65 48 8b 05 06 a0 6c e7 48 89 44 24 08 4c 8d 7f 10 48 8b 47 50 4c 8b 60 78 <49> 83 7c 24 58 00 0f 84 2f 01 00 00 48 89 fb be 30 06 00 00 4c 9
[  272.067317] RSP: 0018:ffffa32082a03940 EFLAGS: 00010282
[  272.072541] RAX: ffff969580b6a810 RBX: ffff969580b68c10 RCX: 0000000000000000
[  272.079672] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff969580b68c00
[  272.086804] RBP: 00000000fffffdfb R08: 0000000000000000 R09: 0000000000000000
[  272.093936] R10: 0000000000000000 R11: ffffffffc0600000 R12: 0000000000000000
[  272.101067] R13: ffffffffa666fbb8 R14: ffffffffc05b5528 R15: ffff969580b68c10
[  272.108198] FS:  00007b930906fc40(0000) GS:ffff969603149000(0000) knlGS:0000000000000000
[  272.116282] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  272.122024] CR2: 0000000000000058 CR3: 000000012631c000 CR4: 00000000003506f0
[  272.129155] Call Trace:
[  272.131606]  <TASK>
[  272.133709]  ? acpi_dev_pm_attach+0xdd/0x110
[  272.137985]  platform_probe+0x69/0xa0
[  272.141652]  really_probe+0x152/0x310
[  272.145318]  __driver_probe_device+0x77/0x110
[  272.149678]  driver_probe_device+0x1e/0x190
[  272.153864]  __driver_attach+0x10b/0x1e0
[  272.157790]  ? driver_attach+0x20/0x20
[  272.161542]  bus_for_each_dev+0x107/0x150
[  272.165553]  bus_add_driver+0x15d/0x270
[  272.169392]  driver_register+0x65/0x110
[  272.173232]  ? cleanup_module+0xa80/0xa80 [i2c_cros_ec_tunnel 3a00532f3f4af4a9eade753f86b0f8dd4e4e5698]
[  272.182617]  do_one_initcall+0x110/0x350
[  272.186543]  ? security_kernfs_init_security+0x49/0xd0
[  272.191682]  ? __kernfs_new_node+0x1b9/0x240
[  272.195954]  ? security_kernfs_init_security+0x49/0xd0
[  272.201093]  ? __kernfs_new_node+0x1b9/0x240
[  272.205365]  ? kernfs_link_sibling+0x105/0x130
[  272.209810]  ? kernfs_next_descendant_post+0x1c/0xa0
[  272.214773]  ? kernfs_activate+0x57/0x70
[  272.218699]  ? kernfs_add_one+0x118/0x160
[  272.222710]  ? __kernfs_create_file+0x71/0xa0
[  272.227069]  ? sysfs_add_bin_file_mode_ns+0xd6/0x110
[  272.232033]  ? internal_create_group+0x453/0x4a0
[  272.236651]  ? __vunmap_range_noflush+0x214/0x2d0
[  272.241355]  ? __free_frozen_pages+0x1dc/0x420
[  272.245799]  ? free_vmap_area_noflush+0x10a/0x1c0
[  272.250505]  ? load_module+0x1509/0x16f0
[  272.254431]  do_init_module+0x60/0x230
[  272.258181]  __se_sys_finit_module+0x27a/0x370
[  272.262627]  do_syscall_64+0x6a/0xf0
[  272.266206]  ? do_syscall_64+0x76/0xf0
[  272.269956]  ? irqentry_exit_to_user_mode+0x79/0x90
[  272.274836]  entry_SYSCALL_64_after_hwframe+0x55/0x5d
[  272.279887] RIP: 0033:0x7b9309168d39
[  272.283466] Code: 5b 41 5c 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d af 40 0c 00 f7 d8 64 89 01 8
[  272.302210] RSP: 002b:00007fff50f1a288 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[  272.309774] RAX: ffffffffffffffda RBX: 000058bf9b50f6d0 RCX: 00007b9309168d39
[  272.316905] RDX: 0000000000000000 RSI: 000058bf6c103a77 RDI: 0000000000000003
[  272.324036] RBP: 00007fff50f1a2e0 R08: 00007fff50f19218 R09: 0000000021ec4150
[  272.331166] R10: 000058bf9b50f7f0 R11: 0000000000000246 R12: 0000000000000000
[  272.338296] R13: 00000000fffffffe R14: 0000000000000000 R15: 000058bf6c103a77
[  272.345428]  </TASK>
[  272.347617] Modules linked in: i2c_cros_ec_tunnel(+)
[  272.364585] gsmi: Log Shutdown Reason 0x03

Returning -EPROBE_DEFER will allow the device to be bound once the
controller is bound, in the case of built-in drivers.

Fixes: 9d230c9e4f4e ("i2c: ChromeOS EC tunnel driver")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250407-null-ec-parent-v1-1-f7dda62d3110@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>