<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/drivers/i2c/chips, branch linux-2.6.28.y</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>i2c/isp1301_omap: Build fixes</title>
<updated>2008-11-28T14:24:38+00:00</updated>
<author>
<name>David Brownell</name>
<email>dbrownell@users.sourceforge.net</email>
</author>
<published>2008-11-28T14:24:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=d1846b0e7a1dc26f90fb0d75641aca9abb077ef9'/>
<id>d1846b0e7a1dc26f90fb0d75641aca9abb077ef9</id>
<content type='text'>
Build fixes for isp1301_omap; no behavior changes:

  - fix incorrect probe() signature (it changed many months ago)
  - provide missing functions on H3 and H4 boards
  - "sparse" fixes (static, NULL-vs-0)

The H3 build bits subset some of the stuff that was previously in
the OMAP tree but never went to mainline.

Signed-off-by: David Brownell &lt;dbrownell@users.sourceforge.net&gt;
Signed-off-by: Jean Delvare &lt;khali@linux-fr.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Build fixes for isp1301_omap; no behavior changes:

  - fix incorrect probe() signature (it changed many months ago)
  - provide missing functions on H3 and H4 boards
  - "sparse" fixes (static, NULL-vs-0)

The H3 build bits subset some of the stuff that was previously in
the OMAP tree but never went to mainline.

Signed-off-by: David Brownell &lt;dbrownell@users.sourceforge.net&gt;
Signed-off-by: Jean Delvare &lt;khali@linux-fr.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>i2c: Inform about deprecated chips directory</title>
<updated>2008-10-22T18:21:33+00:00</updated>
<author>
<name>Wolfram Sang</name>
<email>w.sang@pengutronix.de</email>
</author>
<published>2008-10-22T18:21:33+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=02cf617282c6917484410f86ded3f2d99a05f098'/>
<id>02cf617282c6917484410f86ded3f2d99a05f098</id>
<content type='text'>
The chips directory under drivers/i2c is deprecated. Spread the word!

Signed-off-by: Wolfram Sang &lt;w.sang@pengutronix.de&gt;
Signed-off-by: Jean Delvare &lt;khali@linux-fr.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The chips directory under drivers/i2c is deprecated. Spread the word!

Signed-off-by: Wolfram Sang &lt;w.sang@pengutronix.de&gt;
Signed-off-by: Jean Delvare &lt;khali@linux-fr.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>x86: sysfs: kill owner field from attribute</title>
<updated>2008-10-20T15:52:42+00:00</updated>
<author>
<name>Parag Warudkar</name>
<email>parag.lkml@gmail.com</email>
</author>
<published>2008-10-19T03:28:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=01e8ef11bc1a74e65678ed55795f59266d4add01'/>
<id>01e8ef11bc1a74e65678ed55795f59266d4add01</id>
<content type='text'>
Tejun's commit 7b595756ec1f49e0049a9e01a1298d53a7faaa15 made sysfs
attribute-&gt;owner unnecessary.  But the field was left in the structure to
ease the merge.  It's been over a year since that change and it is now
time to start killing attribute-&gt;owner along with its users - one arch at
a time!

This patch is attempt #1 to get rid of attribute-&gt;owner only for
CONFIG_X86_64 or CONFIG_X86_32 .  We will deal with other arches later on
as and when possible - avr32 will be the next since that is something I
can test.  Compile (make allyesconfig / make allmodconfig / custom config)
and boot tested.

akpm: the idea is that we put the declaration of sttribute.owner inside
`#ifndef CONFIG_X86'.  But that proved to be too ambitious for now because
new usages kept on turning up in subsystem trees.

[akpm: remove the ifdef for now]
Signed-off-by: Parag Warudkar &lt;parag.lkml@gmail.com&gt;
Cc: Greg KH &lt;greg@kroah.com&gt;
Cc: Ingo Molnar &lt;mingo@elte.hu&gt;
Cc: Tejun Heo &lt;htejun@gmail.com&gt;
Cc: Len Brown &lt;lenb@kernel.org&gt;
Cc: Jens Axboe &lt;jens.axboe@oracle.com&gt;
Cc: Jean Delvare &lt;khali@linux-fr.org&gt;
Cc: Roland Dreier &lt;rolandd@cisco.com&gt;
Cc: David Brownell &lt;david-b@pacbell.net&gt;
Cc: Alessandro Zummo &lt;a.zummo@towertech.it&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Tejun's commit 7b595756ec1f49e0049a9e01a1298d53a7faaa15 made sysfs
attribute-&gt;owner unnecessary.  But the field was left in the structure to
ease the merge.  It's been over a year since that change and it is now
time to start killing attribute-&gt;owner along with its users - one arch at
a time!

This patch is attempt #1 to get rid of attribute-&gt;owner only for
CONFIG_X86_64 or CONFIG_X86_32 .  We will deal with other arches later on
as and when possible - avr32 will be the next since that is something I
can test.  Compile (make allyesconfig / make allmodconfig / custom config)
and boot tested.

akpm: the idea is that we put the declaration of sttribute.owner inside
`#ifndef CONFIG_X86'.  But that proved to be too ambitious for now because
new usages kept on turning up in subsystem trees.

[akpm: remove the ifdef for now]
Signed-off-by: Parag Warudkar &lt;parag.lkml@gmail.com&gt;
Cc: Greg KH &lt;greg@kroah.com&gt;
Cc: Ingo Molnar &lt;mingo@elte.hu&gt;
Cc: Tejun Heo &lt;htejun@gmail.com&gt;
Cc: Len Brown &lt;lenb@kernel.org&gt;
Cc: Jens Axboe &lt;jens.axboe@oracle.com&gt;
Cc: Jean Delvare &lt;khali@linux-fr.org&gt;
Cc: Roland Dreier &lt;rolandd@cisco.com&gt;
Cc: David Brownell &lt;david-b@pacbell.net&gt;
Cc: Alessandro Zummo &lt;a.zummo@towertech.it&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>i2c: use bcd2bin/bin2bcd</title>
<updated>2008-10-20T15:52:41+00:00</updated>
<author>
<name>Adrian Bunk</name>
<email>bunk@kernel.org</email>
</author>
<published>2008-10-19T03:28:46+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e4d33969c2d0a9b92c7a2853e3f890dcb4ea37d1'/>
<id>e4d33969c2d0a9b92c7a2853e3f890dcb4ea37d1</id>
<content type='text'>
Change i2c to use the new bcd2bin/bin2bcd functions instead of the
obsolete BCD2BIN/BIN2BCD macros.

Signed-off-by: Adrian Bunk &lt;bunk@kernel.org&gt;
Cc: Jean Delvare &lt;khali@linux-fr.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Change i2c to use the new bcd2bin/bin2bcd functions instead of the
obsolete BCD2BIN/BIN2BCD macros.

Signed-off-by: Adrian Bunk &lt;bunk@kernel.org&gt;
Cc: Jean Delvare &lt;khali@linux-fr.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc</title>
<updated>2008-10-15T15:07:35+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2008-10-15T15:07:35+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=5f2434a66dfa4701b81b79a78eaf9c32da0f8839'/>
<id>5f2434a66dfa4701b81b79a78eaf9c32da0f8839</id>
<content type='text'>
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (158 commits)
  powerpc: Fix CHRP PCI config access for indirect_pci
  powerpc/chrp: Fix detection of Python PCI host bridge on IBM CHRPs
  powerpc: Fix 32-bit SMP boot on CHRP
  powerpc: Fix link errors on 32-bit machines using legacy DMA
  powerpc/pci: Improve detection of unassigned bridge resources
  hvc_console: Fix free_irq in spinlocked section
  powerpc: Get USE_STRICT_MM_TYPECHECKS working again
  powerpc: Reflect the used arguments in machine_init() prototype
  powerpc: Fix DMA offset for non-coherent DMA
  powerpc: fix fsl_upm nand driver modular build
  powerpc/83xx: add NAND support for the MPC8360E-RDK boards
  powerpc: FPGA support for GE Fanuc SBC610
  i2c: MPC8349E-mITX Power Management and GPIO expander driver
  powerpc: reserve two DMA channels for audio in MPC8610 HPCD device tree
  powerpc: document the "fsl,ssi-dma-channel" compatible property
  powerpc: disable CHRP and PMAC support in various defconfigs
  OF: add fsl,mcu-mpc8349emitx to the exception list
  powerpc/83xx: add DS1374 RTC support for the MPC837xE-MDS boards
  powerpc: remove support for bootmem-allocated memory for the DIU driver
  powerpc: remove non-dependent load fsl_booke PTE_64BIT
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (158 commits)
  powerpc: Fix CHRP PCI config access for indirect_pci
  powerpc/chrp: Fix detection of Python PCI host bridge on IBM CHRPs
  powerpc: Fix 32-bit SMP boot on CHRP
  powerpc: Fix link errors on 32-bit machines using legacy DMA
  powerpc/pci: Improve detection of unassigned bridge resources
  hvc_console: Fix free_irq in spinlocked section
  powerpc: Get USE_STRICT_MM_TYPECHECKS working again
  powerpc: Reflect the used arguments in machine_init() prototype
  powerpc: Fix DMA offset for non-coherent DMA
  powerpc: fix fsl_upm nand driver modular build
  powerpc/83xx: add NAND support for the MPC8360E-RDK boards
  powerpc: FPGA support for GE Fanuc SBC610
  i2c: MPC8349E-mITX Power Management and GPIO expander driver
  powerpc: reserve two DMA channels for audio in MPC8610 HPCD device tree
  powerpc: document the "fsl,ssi-dma-channel" compatible property
  powerpc: disable CHRP and PMAC support in various defconfigs
  OF: add fsl,mcu-mpc8349emitx to the exception list
  powerpc/83xx: add DS1374 RTC support for the MPC837xE-MDS boards
  powerpc: remove support for bootmem-allocated memory for the DIU driver
  powerpc: remove non-dependent load fsl_booke PTE_64BIT
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>i2c/tps65010: Vibrator hookup to gpiolib</title>
<updated>2008-10-14T15:30:04+00:00</updated>
<author>
<name>Marek Vasut</name>
<email>marek.vasut@gmail.com</email>
</author>
<published>2008-10-14T15:30:04+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=b84ee0b0c7dc91b729672e6a971fe3b0629ef0ad'/>
<id>b84ee0b0c7dc91b729672e6a971fe3b0629ef0ad</id>
<content type='text'>
All the tps6501{0,1,2,3,4} chips have a signal for hooking up with
a vibrator (for non-auditory cell phone "ring") ... expose that as
one more (output-only) GPIO.

[ dbrownell@users.sourceforge.net: comments; list tps65014 too ]

Signed-off-by: Marek Vasut &lt;marek.vasut@gmail.com&gt;
Signed-off-by: David Brownell &lt;dbrownell@users.sourceforge.net&gt;
Signed-off-by: Jean Delvare &lt;khali@linux-fr.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
All the tps6501{0,1,2,3,4} chips have a signal for hooking up with
a vibrator (for non-auditory cell phone "ring") ... expose that as
one more (output-only) GPIO.

[ dbrownell@users.sourceforge.net: comments; list tps65014 too ]

Signed-off-by: Marek Vasut &lt;marek.vasut@gmail.com&gt;
Signed-off-by: David Brownell &lt;dbrownell@users.sourceforge.net&gt;
Signed-off-by: Jean Delvare &lt;khali@linux-fr.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>i2c/isp1301_omap: Convert to a new-style i2c driver, part 2</title>
<updated>2008-10-14T15:30:02+00:00</updated>
<author>
<name>Jean Delvare</name>
<email>khali@linux-fr.org</email>
</author>
<published>2008-10-14T15:30:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=9df013b3e46c67dd3745df91eaccdc719118e0cc'/>
<id>9df013b3e46c67dd3745df91eaccdc719118e0cc</id>
<content type='text'>
Based on David Brownell's patch for tps65010 and previous work by
Felipe Balbi, this patch finishes converting isp1301_omap to a
new-style i2c driver.

There's definitely room for further drivers cleanups, but these are
out of the scope of this patch.

Signed-off-by: Jean Delvare &lt;khali@linux-fr.org&gt;
Acked-by: Tony Lindgren &lt;tony@atomide.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Based on David Brownell's patch for tps65010 and previous work by
Felipe Balbi, this patch finishes converting isp1301_omap to a
new-style i2c driver.

There's definitely room for further drivers cleanups, but these are
out of the scope of this patch.

Signed-off-by: Jean Delvare &lt;khali@linux-fr.org&gt;
Acked-by: Tony Lindgren &lt;tony@atomide.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>i2c/isp1301_omap: Convert to a new-style i2c driver, part 1</title>
<updated>2008-10-14T15:30:02+00:00</updated>
<author>
<name>Felipe Balbi</name>
<email>me@felipebalbi.com</email>
</author>
<published>2008-10-14T15:30:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=a5f08a327abc45eb6cb3cc1f5fabf38607ae2acc'/>
<id>a5f08a327abc45eb6cb3cc1f5fabf38607ae2acc</id>
<content type='text'>
Based on David Brownell's patch for tps65010, this patch
starts converting isp1301_omap.c to new-style i2c driver.

Signed-off-by: Felipe Balbi &lt;me@felipebalbi.com&gt;
Signed-off-by: Jean Delvare &lt;khali@linux-fr.org&gt;
Acked-by: Tony Lindgren &lt;tony@atomide.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Based on David Brownell's patch for tps65010, this patch
starts converting isp1301_omap.c to new-style i2c driver.

Signed-off-by: Felipe Balbi &lt;me@felipebalbi.com&gt;
Signed-off-by: Jean Delvare &lt;khali@linux-fr.org&gt;
Acked-by: Tony Lindgren &lt;tony@atomide.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>i2c: MPC8349E-mITX Power Management and GPIO expander driver</title>
<updated>2008-10-13T16:10:00+00:00</updated>
<author>
<name>Anton Vorontsov</name>
<email>avorontsov@ru.mvista.com</email>
</author>
<published>2008-09-23T14:13:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=d6c3db83c5567b3a4d8d0bf33dc5687abdf65274'/>
<id>d6c3db83c5567b3a4d8d0bf33dc5687abdf65274</id>
<content type='text'>
On MPC8349E-mITX, MPC8315E-RDB and MPC837x-RDB boards there is a
Freescale MC9S08QG8 (MCU) chip with the custom firmware
pre-programmed. The chip is used to power-off the board by the
software, and to control some GPIO pins.

Signed-off-by: Anton Vorontsov &lt;avorontsov@ru.mvista.com&gt;
Signed-off-by: Kumar Gala &lt;galak@kernel.crashing.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
On MPC8349E-mITX, MPC8315E-RDB and MPC837x-RDB boards there is a
Freescale MC9S08QG8 (MCU) chip with the custom firmware
pre-programmed. The chip is used to power-off the board by the
software, and to control some GPIO pins.

Signed-off-by: Anton Vorontsov &lt;avorontsov@ru.mvista.com&gt;
Signed-off-by: Kumar Gala &lt;galak@kernel.crashing.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>USB: isp1301: fix compilation</title>
<updated>2008-08-14T00:32:56+00:00</updated>
<author>
<name>Dmitry Baryshkov</name>
<email>dbaryshkov@gmail.com</email>
</author>
<published>2008-08-07T12:29:24+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=cbbcb9b0c7e4d1fd90cf54427382dae525773dc2'/>
<id>cbbcb9b0c7e4d1fd90cf54427382dae525773dc2</id>
<content type='text'>
Signed-off-by: Dmitry Baryshkov &lt;dbaryshkov@gmail.com&gt;
Acked-by: David Brownell &lt;dbrownell@users.sourceforge.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@suse.de&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Signed-off-by: Dmitry Baryshkov &lt;dbaryshkov@gmail.com&gt;
Acked-by: David Brownell &lt;dbrownell@users.sourceforge.net&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@suse.de&gt;

</pre>
</div>
</content>
</entry>
</feed>
