linux-stable.git/drivers/hwmon, branch v6.6.2

hwmon: (sch5627) Disallow write access if virtual registers are locked

2023-11-20T10:59:08+00:00

[ Upstream commit 7da8a635436029957c5350da3acf51d78ed64071 ]

When the lock bit inside SCH5627_REG_CTRL is set, then the virtual
registers become read-only until the next power cycle.
Disallow write access to those registers in such a case.

Tested on a Fujitsu Esprimo P720.

Fixes: aa9f833dfc12 ("hwmon: (sch5627) Add pwmX_auto_channels_temp support")
Signed-off-by: Armin Wolf 
Link: https://lore.kernel.org/r/20230907052639.16491-3-W_Armin@gmx.de
Signed-off-by: Guenter Roeck 
Signed-off-by: Sasha Levin

hwmon: (sch5627) Use bit macros when accessing the control register

2023-11-20T10:59:08+00:00

[ Upstream commit 7f0b28e0653f36b51542d25dd54ed312c397ecfc ]

Use bit macros then accessing SCH5627_REG_CTRL, so that people
do not need to look at the datasheet to find out what each bit
does.

Tested on a Fujitsu Esprimo P720.

Signed-off-by: Armin Wolf 
Link: https://lore.kernel.org/r/20230907052639.16491-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck 
Stable-dep-of: 7da8a6354360 ("hwmon: (sch5627) Disallow write access if virtual registers are locked")
Signed-off-by: Sasha Levin

hwmon: (pmbus/mp2975) Move PGOOD fix

2023-11-20T10:59:08+00:00

[ Upstream commit 9da2901c47332b030ea4d2a2302bc7c0b83fc67c ]

The PGOOD fix was intended for MP2973 & MP2971 & not for MP2975.

Fixes: acda945afb46 ("hwmon: (pmbus/mp2975) Fix PGOOD in READ_STATUS_WORD")
Signed-off-by: Naresh Solanki 
Link: https://lore.kernel.org/r/20231027103352.918895-1-naresh.solanki@9elements.com
Signed-off-by: Guenter Roeck 
Signed-off-by: Sasha Levin

Revert "hwmon: (sch56xx-common) Add automatic module loading on supported devices"

2023-11-20T10:59:07+00:00

[ Upstream commit d621a46d05107f4e510383d6a38f2160c62d28f7 ]

This reverts commit 393935baa45e5ccb9603cf7f9f020ed1bc0915f7.

As reported by Ian Nartowicz, this and the next patch
result in a failure to load the driver on Celsius W280.
While the alternative would be to add the board to the DMI
override table, it is quite likely that other systems are
also affected. Revert the offending patches to avoid future
problems.

Fixes: 393935baa45e ("hwmon: (sch56xx-common) Add automatic module loading on supported devices")
Reported-by: Ian Nartowicz 
Closes: https://lore.kernel.org/linux-hwmon/20231025192239.3c5389ae@debian.org/T/#t
Cc: Armin Wolf 
Signed-off-by: Guenter Roeck 
Signed-off-by: Sasha Levin

Revert "hwmon: (sch56xx-common) Add DMI override table"

2023-11-20T10:59:07+00:00

[ Upstream commit 28da9dee3594423534f3ea1e1f61e6bb2d2fa651 ]

This reverts commit fd2d53c367ae9983c2100ac733a834e0c79d7537.

As reported by Ian Nartowicz, this and the preceding patch
result in a failure to load the driver on Celsius W280.
While the alternative would be to add the board to the DMI
override table, it is quite likely that other systems are
also affected. Revert the offending patches to avoid future
problems.

Fixes: fd2d53c367ae ("hwmon: (sch56xx-common) Add DMI override table")
Reported-by: Ian Nartowicz 
Closes: https://lore.kernel.org/linux-hwmon/20231025192239.3c5389ae@debian.org/T/#t
Cc: Armin Wolf 
Signed-off-by: Guenter Roeck 
Signed-off-by: Sasha Levin

hwmon: (coretemp) Fix potentially truncated sysfs attribute name

2023-11-20T10:59:07+00:00

[ Upstream commit bbfff736d30e5283ad09e748caff979d75ddef7f ]

When build with W=1 and "-Werror=format-truncation", below error is
observed in coretemp driver,

   drivers/hwmon/coretemp.c: In function 'create_core_data':
>> drivers/hwmon/coretemp.c:393:34: error: '%s' directive output may be truncated writing likely 5 or more bytes into a region of size between 3 and 13 [-Werror=format-truncation=]
     393 |                          "temp%d_%s", attr_no, suffixes[i]);
         |                                  ^~
   drivers/hwmon/coretemp.c:393:26: note: assuming directive output of 5 bytes
     393 |                          "temp%d_%s", attr_no, suffixes[i]);
         |                          ^~~~~~~~~~~
   drivers/hwmon/coretemp.c:392:17: note: 'snprintf' output 7 or more bytes (assuming 22) into a destination of size 19
     392 |                 snprintf(tdata->attr_name[i], CORETEMP_NAME_LENGTH,
         |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     393 |                          "temp%d_%s", attr_no, suffixes[i]);
         |                          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   cc1: all warnings being treated as errors

Given that
1. '%d' could take 10 charactors,
2. '%s' could take 10 charactors ("crit_alarm"),
3. "temp", "_" and the NULL terminator take 6 charactors,
fix the problem by increasing CORETEMP_NAME_LENGTH to 28.

Signed-off-by: Zhang Rui 
Fixes: 7108b80a542b ("hwmon/coretemp: Handle large core ID value")
Reported-by: kernel test robot 
Closes: https://lore.kernel.org/oe-kbuild-all/202310200443.iD3tUbbK-lkp@intel.com/
Link: https://lore.kernel.org/r/20231025122316.836400-1-rui.zhang@intel.com
Signed-off-by: Guenter Roeck 
Signed-off-by: Sasha Levin

hwmon: (axi-fan-control) Fix possible NULL pointer dereference

2023-11-20T10:59:07+00:00

[ Upstream commit 2a5b3370a1d9750eca325292e291c8c7cb8cf2e0 ]

axi_fan_control_irq_handler(), dependent on the private
axi_fan_control_data structure, might be called before the hwmon
device is registered. That will cause an "Unable to handle kernel
NULL pointer dereference" error.

Fixes: 8412b410fa5e ("hwmon: Support ADI Fan Control IP")
Signed-off-by: Dragos Bogdan 
Signed-off-by: Nuno Sa 
Link: https://lore.kernel.org/r/20231025132100.649499-1-nuno.sa@analog.com
Signed-off-by: Guenter Roeck 
Signed-off-by: Sasha Levin

hwmon: (nct6775) Fix incorrect variable reuse in fan_div calculation

2023-11-20T10:58:51+00:00

commit 920057ad521dc8669e534736c2a12c14ec9fb2d7 upstream.

In the regmap conversion in commit 4ef2774511dc ("hwmon: (nct6775)
Convert register access to regmap API") I reused the 'reg' variable
for all three register reads in the fan speed calculation loop in
nct6775_update_device(), but failed to notice that the value from the
first one (data->REG_FAN[i]) is actually used in the call to
nct6775_select_fan_div() at the end of the loop body.  Since that
patch the register value passed to nct6775_select_fan_div() has been
(conditionally) incorrectly clobbered with the value of a different
register than intended, which has in at least some cases resulted in
fan speeds being adjusted down to zero.

Fix this by using dedicated temporaries for the two intermediate
register reads instead of 'reg'.

Signed-off-by: Zev Weiss 
Fixes: 4ef2774511dc ("hwmon: (nct6775) Convert register access to regmap API")
Reported-by: Thomas Zajic 
Tested-by: Thomas Zajic 
Cc: stable@vger.kernel.org # v5.19+
Link: https://lore.kernel.org/r/20230929200822.964-2-zev@bewilderbeest.net
Signed-off-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

hwmon: (nct6775) Fix non-existent ALARM warning

2023-09-18T18:52:18+00:00

Skip non-existent ALARM attribute to avoid a shift-out-of-bounds
dmesg warning.

Reported-by: Doug Smythies 
Closes: https://lore.kernel.org/linux-hwmon/ZQVzdlHgWdFhOVyQ@debian.me/T/#mc69b690660eb50734a6b07506d74a119e0266f1b
Fixes: b7f1f7b2523a ("hwmon: (nct6775) Additional TEMP registers for nct6799")
Signed-off-by: Ahmad Khalifa 
Link: https://lore.kernel.org/r/20230918184722.2033225-1-ahmad@khalifa.ws
Signed-off-by: Guenter Roeck

Merge tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2023-09-01T16:53:54+00:00

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc and other small driver subsystem
  changes for 6.6-rc1.

  Stuff all over the place here, lots of driver updates and changes and
  new additions. Short summary is:

   - new IIO drivers and updates

   - Interconnect driver updates

   - fpga driver updates and additions

   - fsi driver updates

   - mei driver updates

   - coresight driver updates

   - nvmem driver updates

   - counter driver updates

   - lots of smaller misc and char driver updates and additions

  All of these have been in linux-next for a long time with no reported
  problems"

* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
  nvmem: core: Notify when a new layout is registered
  nvmem: core: Do not open-code existing functions
  nvmem: core: Return NULL when no nvmem layout is found
  nvmem: core: Create all cells before adding the nvmem device
  nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
  nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
  dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
  dt-bindings: nvmem: Add compatible for QCM2290
  nvmem: Kconfig: Fix typo "drive" -> "driver"
  nvmem: Explicitly include correct DT includes
  nvmem: add new NXP QorIQ eFuse driver
  dt-bindings: nvmem: Add t1023-sfp efuse support
  dt-bindings: nvmem: qfprom: Add compatible for MSM8226
  nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
  nvmem: qfprom: do some cleanup
  nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
  nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
  nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
  nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
  nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
  ...