linux-stable.git/drivers/hwmon, branch v6.2.2 Linux kernel stable tree Merge tag 'hwmon-for-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging 2022-12-13T21:09:38+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-12-13T21:09:38+00:00 4d03390b5cb97ea8562fcf324106c4735805d558 Pull hwmon updates from Guenter Roeck: "New drivers: - Driver for OneXPlayer mini AMD sensors - Ampere's Altra smpro-hwmon driver New chip and attribute support in existing drivers: - nct6775: Support for ASUS CROSSHAIR VIII/TUF/ProArt B550M - pmbus/ltc2978: Support for LTC7132 - aquacomputer_d5next: Support for temperature sensor offsets and flow sensor pulses - coretemp: Support for dynamic ttarget and tjmax Improvements: - Use devm_regulator_get_enable() where appropriate - Use sysfs_emit() instead of scnprintf() - Remove some useless #include <linux/hwmon-vid.h> - Include <linux/kstrtox.h> when appropriate - Use simple i2c probe - it87: Check for a valid chip before using force_id, and new new module parameter to ignore ACPI resource conflicts - jc42: Use regmap, and restore min/max/critical temperatures on resume - Add reporting power good and status to PMBus based regulators Last minute fixes: - emc2305: Fix probing of emc2301/2/3, and fix setting pwm values manually if THERMAL is enabled And various other minor fixes and improvements" * tag 'hwmon-for-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (37 commits) hwmon: (emc2305) fix pwm never being able to set lower hwmon: (emc2305) fix unable to probe emc2301/2/3 hwmon: (dell-smm) Move error message to make probing silent hwmon: use sysfs_emit() to instead of scnprintf() hwmon: (oxp-sensors) Fix pwm reading hwmon: (aquacomputer_d5next) Add support for Quadro flow sensor pulses hwmon: (pmbus/core) Implement regulator get_status hwmon: (oxp-sensors) Add AOK ZOE and Mini PRO hwmon: (gsc-hwmon) Switch to flexible array to simplify code hwmon: (pmbus) Add power good support hwmon: (nct6775) add ASUS CROSSHAIR VIII/TUF/ProArt B550M hwmon: (coretemp) Add support for dynamic ttarget hwmon: (coretemp) Add support for dynamic tjmax hwmon: (coretemp) rearrange tjmax handing code hwmon: Remove some useless #include <linux/hwmon-vid.h> hwmon: (coretemp) Remove obsolete temp_data->valid hwmon: add OneXPlayer mini AMD sensors driver hwmon: (aquacomputer_d5next) Clear up macros and comments hwmon: (it87) Add DMI table for future extensions hwmon: Include <linux/kstrtox.h> when appropriate ... 
Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - Driver for OneXPlayer mini AMD sensors

   - Ampere's Altra smpro-hwmon driver

  New chip and attribute support in existing drivers:

   - nct6775: Support for ASUS CROSSHAIR VIII/TUF/ProArt B550M

   - pmbus/ltc2978: Support for LTC7132

   - aquacomputer_d5next: Support for temperature sensor offsets and
     flow sensor pulses

   - coretemp: Support for dynamic ttarget and tjmax

  Improvements:

   - Use devm_regulator_get_enable() where appropriate

   - Use sysfs_emit() instead of scnprintf()

   - Remove some useless #include <linux/hwmon-vid.h>

   - Include <linux/kstrtox.h> when appropriate

   - Use simple i2c probe

   - it87: Check for a valid chip before using force_id, and new new
     module parameter to ignore ACPI resource conflicts

   - jc42: Use regmap, and restore min/max/critical temperatures on
     resume

   - Add reporting power good and status to PMBus based regulators

  Last minute fixes:

   - emc2305: Fix probing of emc2301/2/3, and fix setting pwm values
     manually if THERMAL is enabled

  And various other minor fixes and improvements"

* tag 'hwmon-for-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (37 commits)
  hwmon: (emc2305) fix pwm never being able to set lower
  hwmon: (emc2305) fix unable to probe emc2301/2/3
  hwmon: (dell-smm) Move error message to make probing silent
  hwmon: use sysfs_emit() to instead of scnprintf()
  hwmon: (oxp-sensors) Fix pwm reading
  hwmon: (aquacomputer_d5next) Add support for Quadro flow sensor pulses
  hwmon: (pmbus/core) Implement regulator get_status
  hwmon: (oxp-sensors) Add AOK ZOE and Mini PRO
  hwmon: (gsc-hwmon) Switch to flexible array to simplify code
  hwmon: (pmbus) Add power good support
  hwmon: (nct6775) add ASUS CROSSHAIR VIII/TUF/ProArt B550M
  hwmon: (coretemp) Add support for dynamic ttarget
  hwmon: (coretemp) Add support for dynamic tjmax
  hwmon: (coretemp) rearrange tjmax handing code
  hwmon: Remove some useless #include <linux/hwmon-vid.h>
  hwmon: (coretemp) Remove obsolete temp_data->valid
  hwmon: add OneXPlayer mini AMD sensors driver
  hwmon: (aquacomputer_d5next) Clear up macros and comments
  hwmon: (it87) Add DMI table for future extensions
  hwmon: Include <linux/kstrtox.h> when appropriate
  ...
Merge branches 'acpi-scan', 'acpi-bus', 'acpi-tables' and 'acpi-sysfs' 2022-12-12T13:55:44+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2022-12-12T13:55:44+00:00 45494d77f279d0420f06376dcf105b23e300c5a4 Merge ACPI changes related to device enumeration, device object managenet, operation region handling, table parsing and sysfs interface: - Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device enumeration code (Giulio Benetti). - Change the return type of the ACPI driver remove callback to void and update its users accordingly (Dawei Li). - Add general support for FFH address space type and implement the low- level part of it for ARM64 (Sudeep Holla). - Fix stale comments in the ACPI tables parsing code and make it print more messages related to MADT (Hanjun Guo, Huacai Chen). - Replace invocations of generic library functions with more kernel- specific counterparts in the ACPI sysfs interface (Christophe JAILLET, Xu Panda). * acpi-scan: ACPI: scan: substitute empty_zero_page with helper ZERO_PAGE(0) * acpi-bus: ACPI: FFH: Silence missing prototype warnings ACPI: make remove callback of ACPI driver void ACPI: bus: Fix the _OSC capability check for FFH OpRegion arm64: Add architecture specific ACPI FFH Opregion callbacks ACPI: Implement a generic FFH Opregion handler * acpi-tables: ACPI: tables: Fix the stale comments for acpi_locate_initial_tables() ACPI: tables: Print CORE_PIC information when MADT is parsed * acpi-sysfs: ACPI: sysfs: use sysfs_emit() to instead of scnprintf() ACPI: sysfs: Use kstrtobool() instead of strtobool() 
Merge ACPI changes related to device enumeration, device object
managenet, operation region handling, table parsing and sysfs
interface:

 - Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
   enumeration code (Giulio Benetti).

 - Change the return type of the ACPI driver remove callback to void and
   update its users accordingly (Dawei Li).

 - Add general support for FFH address space type and implement the low-
   level part of it for ARM64 (Sudeep Holla).

 - Fix stale comments in the ACPI tables parsing code and make it print
   more messages related to MADT (Hanjun Guo, Huacai Chen).

 - Replace invocations of generic library functions with more kernel-
   specific counterparts in the ACPI sysfs interface (Christophe JAILLET,
   Xu Panda).

* acpi-scan:
  ACPI: scan: substitute empty_zero_page with helper ZERO_PAGE(0)

* acpi-bus:
  ACPI: FFH: Silence missing prototype warnings
  ACPI: make remove callback of ACPI driver void
  ACPI: bus: Fix the _OSC capability check for FFH OpRegion
  arm64: Add architecture specific ACPI FFH Opregion callbacks
  ACPI: Implement a generic FFH Opregion handler

* acpi-tables:
  ACPI: tables: Fix the stale comments for acpi_locate_initial_tables()
  ACPI: tables: Print CORE_PIC information when MADT is parsed

* acpi-sysfs:
  ACPI: sysfs: use sysfs_emit() to instead of scnprintf()
  ACPI: sysfs: Use kstrtobool() instead of strtobool()
hwmon: (emc2305) fix pwm never being able to set lower 2022-12-06T22:45:19+00:00 Xingjiang Qiao nanpuyue@gmail.com 2022-12-06T05:53:31+00:00 364ffd2537c44cb6914ff5669153f4a86fffad29 There are fields 'last_hwmon_state' and 'last_thermal_state' in the structure 'emc2305_cdev_data', which respectively store the cooling state set by the 'hwmon' and 'thermal' subsystem, and the driver author hopes that if the state set by 'hwmon' is lower than the value set by 'thermal', the driver will just save it without actually setting the pwm. Currently, the 'last_thermal_state' also be updated by 'hwmon', which will cause the cooling state to never be set to a lower value. This patch fixes that. Signed-off-by: Xingjiang Qiao <nanpuyue@gmail.com> Link: https://lore.kernel.org/r/20221206055331.170459-2-nanpuyue@gmail.com Fixes: 0d8400c5a2ce1 ("hwmon: (emc2305) add support for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller.") [groeck: renamed emc2305_set_cur_state_shim -> __emc2305_set_cur_state] Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
There are fields 'last_hwmon_state' and 'last_thermal_state' in the
structure 'emc2305_cdev_data', which respectively store the cooling state
set by the 'hwmon' and 'thermal' subsystem, and the driver author hopes
that if the state set by 'hwmon' is lower than the value set by 'thermal',
the driver will just save it without actually setting the pwm. Currently,
the 'last_thermal_state' also be updated by 'hwmon', which will cause the
cooling state to never be set to a lower value. This patch fixes that.

Signed-off-by: Xingjiang Qiao <nanpuyue@gmail.com>
Link: https://lore.kernel.org/r/20221206055331.170459-2-nanpuyue@gmail.com
Fixes: 0d8400c5a2ce1 ("hwmon: (emc2305) add support for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller.")
[groeck: renamed emc2305_set_cur_state_shim -> __emc2305_set_cur_state]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: (emc2305) fix unable to probe emc2301/2/3 2022-12-06T22:37:47+00:00 Xingjiang Qiao nanpuyue@gmail.com 2022-12-06T05:53:30+00:00 4d50591ebf60ccf79380fff3a4c23659c61c482f The definitions of 'EMC2305_REG_PRODUCT_ID' and 'EMC2305_REG_DEVICE' are both '0xfd', they actually return the same value, but the values returned by emc2301/2/3/5 are different, so probe emc2301/2/3 will fail, This patch fixes that. Signed-off-by: Xingjiang Qiao <nanpuyue@gmail.com> Link: https://lore.kernel.org/r/20221206055331.170459-1-nanpuyue@gmail.com Fixes: 0d8400c5a2ce1 ("hwmon: (emc2305) add support for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller.") Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
The definitions of 'EMC2305_REG_PRODUCT_ID' and 'EMC2305_REG_DEVICE' are
both '0xfd', they actually return the same value, but the values returned
by emc2301/2/3/5 are different, so probe emc2301/2/3 will fail, This patch
fixes that.

Signed-off-by: Xingjiang Qiao <nanpuyue@gmail.com>
Link: https://lore.kernel.org/r/20221206055331.170459-1-nanpuyue@gmail.com
Fixes: 0d8400c5a2ce1 ("hwmon: (emc2305) add support for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller.")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: (dell-smm) Move error message to make probing silent 2022-12-05T03:34:51+00:00 Armin Wolf W_Armin@gmx.de 2022-11-30T18:34:18+00:00 688fcd047ef0f0aeee16d0fefaff065fa69eb642 If dell-smm-hwmon loads on unsupported hardware like the Dell XPS 17 9710, an error message is printed. This might confuse users, as drivers are expected to be silent if no supported hardware is found. Reorder the error message so its only printed when the driver is loaded with the "force" option being set. Also reword the error message slightly. Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20221130183418.357246-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
If dell-smm-hwmon loads on unsupported hardware like the
Dell XPS 17 9710, an error message is printed.
This might confuse users, as drivers are expected to be
silent if no supported hardware is found.
Reorder the error message so its only printed when the
driver is loaded with the "force" option being set.
Also reword the error message slightly.

Tested on a Dell Inspiron 3505.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20221130183418.357246-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: use sysfs_emit() to instead of scnprintf() 2022-12-05T00:49:43+00:00 ye xingchen ye.xingchen@zte.com.cn 2022-12-01T03:30:31+00:00 4e6104b1e70020ad500f0fab7238898dd2ea2a38 Replace the open-code with sysfs_emit() to simplify the code. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/202212011130317080061@zte.com.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
Replace the open-code with sysfs_emit() to simplify the code.

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202212011130317080061@zte.com.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: (oxp-sensors) Fix pwm reading 2022-12-05T00:45:03+00:00 Joaquín Ignacio Aramendía samsagax@gmail.com 2022-11-28T18:52:06+00:00 0cd3ba682ae27cbe17c41f85b8e6db6da38296b2 PWM reading is only 1 register long. Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com> Link: https://lore.kernel.org/r/20221128185206.212022-1-samsagax@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
PWM reading is only 1 register long.

Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Link: https://lore.kernel.org/r/20221128185206.212022-1-samsagax@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: (aquacomputer_d5next) Add support for Quadro flow sensor pulses 2022-12-05T00:45:03+00:00 Aleksa Savic savicaleksa83@gmail.com 2022-11-26T07:13:13+00:00 6ff838f2877dcd5ec7db0745a2652a048a697991 Add support for reading and writing flow sensor pulses value on the Aquacomputer Quadro. Implemented by Leonard Anderweit [1]. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/45 Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com> Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20221126071313.34356-1-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
Add support for reading and writing flow sensor pulses value on
the Aquacomputer Quadro. Implemented by Leonard Anderweit [1].

[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/45

Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20221126071313.34356-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: (pmbus/core) Implement regulator get_status 2022-12-05T00:45:03+00:00 Patrick Rudolph patrick.rudolph@9elements.com 2022-11-24T19:36:42+00:00 c05f477c4ba36e007c03ff4f834f43bc4e37692b Add get_status for pmbus_regulator_ops. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Link: https://lore.kernel.org/r/20221124193642.4081054-1-Naresh.Solanki@9elements.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
Add get_status for pmbus_regulator_ops.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Link: https://lore.kernel.org/r/20221124193642.4081054-1-Naresh.Solanki@9elements.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: (oxp-sensors) Add AOK ZOE and Mini PRO 2022-12-05T00:45:03+00:00 Joaquín Ignacio Aramendía samsagax@gmail.com 2022-11-25T11:49:01+00:00 3ca0f12a02582c3dd4029294ab0245ba77c27a77 Add support for the AOK ZOE A1 and OXP Mini PRO handheld devices. DMI strings are added to this driver since the same EC layout is used and has similar specs as the OXP mini AMD. The added devices are: - OneXPlayer mini PRO (AMD 6800U) - AOK ZOE A1 (AMD 6800U) Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com> Link: https://lore.kernel.org/r/20221125114901.11309-1-samsagax@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
Add support for the AOK ZOE A1 and OXP Mini PRO handheld devices.
DMI strings are added to this driver since the same EC layout is used and
has similar specs as the OXP mini AMD.

The added devices are:
- OneXPlayer mini PRO (AMD 6800U)
- AOK ZOE A1 (AMD 6800U)

Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Link: https://lore.kernel.org/r/20221125114901.11309-1-samsagax@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>