linux-stable.git/drivers/hwmon, branch v5.17.2 Linux kernel stable tree hwmon: (pmbus) Add Vin unit off handling 2022-04-08T11:57:38+00:00 Brandon Wyman bjwyman@gmail.com 2022-03-17T23:21:23+00:00 f3a677d1e7958ceb3c27c90c5efd7c4b2824d7b4 [ Upstream commit a5436af598779219b375c1977555c82def1c35d0 ] If there is an input undervoltage fault, reported in STATUS_INPUT command response, there is quite likely a "Unit Off For Insufficient Input Voltage" condition as well. Add a constant for bit 3 of STATUS_INPUT. Update the Vin limit attributes to include both bits in the mask for clearing faults. If an input undervoltage fault occurs, causing a unit off for insufficient input voltage, but the unit is off bit is not cleared, the STATUS_WORD will not be updated to clear the input fault condition. Including the unit is off bit (bit 3) allows for the input fault condition to completely clear. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20220317232123.2103592-1-bjwyman@gmail.com Fixes: b4ce237b7f7d3 ("hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers") [groeck: Dropped unnecessary ()] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a5436af598779219b375c1977555c82def1c35d0 ]

If there is an input undervoltage fault, reported in STATUS_INPUT
command response, there is quite likely a "Unit Off For Insufficient
Input Voltage" condition as well.

Add a constant for bit 3 of STATUS_INPUT. Update the Vin limit
attributes to include both bits in the mask for clearing faults.

If an input undervoltage fault occurs, causing a unit off for
insufficient input voltage, but the unit is off bit is not cleared, the
STATUS_WORD will not be updated to clear the input fault condition.
Including the unit is off bit (bit 3) allows for the input fault
condition to completely clear.

Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Link: https://lore.kernel.org/r/20220317232123.2103592-1-bjwyman@gmail.com
Fixes: b4ce237b7f7d3 ("hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers")
[groeck: Dropped unnecessary ()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hwmon: (sch56xx-common) Replace WDOG_ACTIVE with WDOG_HW_RUNNING 2022-04-08T11:57:35+00:00 Armin Wolf W_Armin@gmx.de 2022-01-31T21:19:35+00:00 93cbe13a25a03c90408929351ea3b2993979f3d5 [ Upstream commit 647d6f09bea7dacf4cdb6d4ea7e3051883955297 ] If the watchdog was already enabled by the BIOS after booting, the watchdog infrastructure needs to regularly send keepalives to prevent a unexpected reset. WDOG_ACTIVE only serves as an status indicator for userspace, we want to use WDOG_HW_RUNNING instead. Since my Fujitsu Esprimo P720 does not support the watchdog, this change is compile-tested only. Suggested-by: Guenter Roeck <linux@roeck-us.net> Fixes: fb551405c0f8 (watchdog: sch56xx: Use watchdog core) Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20220131211935.3656-5-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 647d6f09bea7dacf4cdb6d4ea7e3051883955297 ]

If the watchdog was already enabled by the BIOS after booting, the
watchdog infrastructure needs to regularly send keepalives to
prevent a unexpected reset.
WDOG_ACTIVE only serves as an status indicator for userspace,
we want to use WDOG_HW_RUNNING instead.

Since my Fujitsu Esprimo P720 does not support the watchdog,
this change is compile-tested only.

Suggested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: fb551405c0f8 (watchdog: sch56xx: Use watchdog core)
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220131211935.3656-5-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hwmon: (pmbus) Add mutex to regulator ops 2022-04-08T11:57:35+00:00 Patrick Rudolph patrick.rudolph@9elements.com 2022-02-25T16:06:09+00:00 4a8b740713f1465778c88b4b9324bde5fb1b4d0d [ Upstream commit 686d303ee6301261b422ea51e64833d7909a2c36 ] On PMBUS devices with multiple pages, the regulator ops need to be protected with the update mutex. This prevents accidentally changing the page in a separate thread while operating on the PMBUS_OPERATION register. Tested on Infineon xdpe11280 while a separate thread polls for sensor data. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Link: https://lore.kernel.org/r/b991506bcbf665f7af185945f70bf9d5cf04637c.1645804976.git.sylv@sylv.io Fixes: ddbb4db4ced1b ("hwmon: (pmbus) Add regulator support") Cc: Alan Tull <atull@opensource.altera.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 686d303ee6301261b422ea51e64833d7909a2c36 ]

On PMBUS devices with multiple pages, the regulator ops need to be
protected with the update mutex. This prevents accidentally changing
the page in a separate thread while operating on the PMBUS_OPERATION
register.

Tested on Infineon xdpe11280 while a separate thread polls for sensor
data.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Link: https://lore.kernel.org/r/b991506bcbf665f7af185945f70bf9d5cf04637c.1645804976.git.sylv@sylv.io
Fixes: ddbb4db4ced1b ("hwmon: (pmbus) Add regulator support")
Cc: Alan Tull <atull@opensource.altera.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hwmon: (pmbus) Clear pmbus fault/warning bits after read 2022-02-22T16:15:39+00:00 Vikash Chandola vikash.chandola@linux.intel.com 2022-02-22T13:12:53+00:00 35f165f08950a876f1b95a61d79c93678fba2fd6 Almost all fault/warning bits in pmbus status registers remain set even after fault/warning condition are removed. As per pmbus specification these faults must be cleared by user. Modify hwmon behavior to clear fault/warning bit after fetching data if fault/warning bit was set. This allows to get fresh data in next read. Signed-off-by: Vikash Chandola <vikash.chandola@linux.intel.com> Link: https://lore.kernel.org/r/20220222131253.2426834-1-vikash.chandola@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
Almost all fault/warning bits in pmbus status registers remain set even
after fault/warning condition are removed. As per pmbus specification
these faults must be cleared by user.
Modify hwmon behavior to clear fault/warning bit after fetching data if
fault/warning bit was set. This allows to get fresh data in next read.

Signed-off-by: Vikash Chandola <vikash.chandola@linux.intel.com>
Link: https://lore.kernel.org/r/20220222131253.2426834-1-vikash.chandola@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: Handle failure to register sensor with thermal zone correctly 2022-02-22T16:04:01+00:00 Guenter Roeck linux@roeck-us.net 2022-02-21T16:32:14+00:00 1b5f517cca36292076d9e38fa6e33a257703e62e If an attempt is made to a sensor with a thermal zone and it fails, the call to devm_thermal_zone_of_sensor_register() may return -ENODEV. This may result in crashes similar to the following. Unable to handle kernel NULL pointer dereference at virtual address 00000000000003cd ... Internal error: Oops: 96000021 [#1] PREEMPT SMP ... pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mutex_lock+0x18/0x60 lr : thermal_zone_device_update+0x40/0x2e0 sp : ffff800014c4fc60 x29: ffff800014c4fc60 x28: ffff365ee3f6e000 x27: ffffdde218426790 x26: ffff365ee3f6e000 x25: 0000000000000000 x24: ffff365ee3f6e000 x23: ffffdde218426870 x22: ffff365ee3f6e000 x21: 00000000000003cd x20: ffff365ee8bf3308 x19: ffffffffffffffed x18: 0000000000000000 x17: ffffdde21842689c x16: ffffdde1cb7a0b7c x15: 0000000000000040 x14: ffffdde21a4889a0 x13: 0000000000000228 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000001120000 x7 : 0000000000000001 x6 : 0000000000000000 x5 : 0068000878e20f07 x4 : 0000000000000000 x3 : 00000000000003cd x2 : ffff365ee3f6e000 x1 : 0000000000000000 x0 : 00000000000003cd Call trace: mutex_lock+0x18/0x60 hwmon_notify_event+0xfc/0x110 0xffffdde1cb7a0a90 0xffffdde1cb7a0b7c irq_thread_fn+0x2c/0xa0 irq_thread+0x134/0x240 kthread+0x178/0x190 ret_from_fork+0x10/0x20 Code: d503201f d503201f d2800001 aa0103e4 (c8e47c02) Jon Hunter reports that the exact call sequence is: hwmon_notify_event() --> hwmon_thermal_notify() --> thermal_zone_device_update() --> update_temperature() --> mutex_lock() The hwmon core needs to handle all errors returned from calls to devm_thermal_zone_of_sensor_register(). If the call fails with -ENODEV, report that the sensor was not attached to a thermal zone but continue to register the hwmon device. Reported-by: Jon Hunter <jonathanh@nvidia.com> Cc: Dmitry Osipenko <digetx@gmail.com> Fixes: 1597b374af222 ("hwmon: Add notification support") Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
If an attempt is made to a sensor with a thermal zone and it fails,
the call to devm_thermal_zone_of_sensor_register() may return -ENODEV.
This may result in crashes similar to the following.

Unable to handle kernel NULL pointer dereference at virtual address 00000000000003cd
...
Internal error: Oops: 96000021 [#1] PREEMPT SMP
...
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mutex_lock+0x18/0x60
lr : thermal_zone_device_update+0x40/0x2e0
sp : ffff800014c4fc60
x29: ffff800014c4fc60 x28: ffff365ee3f6e000 x27: ffffdde218426790
x26: ffff365ee3f6e000 x25: 0000000000000000 x24: ffff365ee3f6e000
x23: ffffdde218426870 x22: ffff365ee3f6e000 x21: 00000000000003cd
x20: ffff365ee8bf3308 x19: ffffffffffffffed x18: 0000000000000000
x17: ffffdde21842689c x16: ffffdde1cb7a0b7c x15: 0000000000000040
x14: ffffdde21a4889a0 x13: 0000000000000228 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000000001120000 x7 : 0000000000000001 x6 : 0000000000000000
x5 : 0068000878e20f07 x4 : 0000000000000000 x3 : 00000000000003cd
x2 : ffff365ee3f6e000 x1 : 0000000000000000 x0 : 00000000000003cd
Call trace:
 mutex_lock+0x18/0x60
 hwmon_notify_event+0xfc/0x110
 0xffffdde1cb7a0a90
 0xffffdde1cb7a0b7c
 irq_thread_fn+0x2c/0xa0
 irq_thread+0x134/0x240
 kthread+0x178/0x190
 ret_from_fork+0x10/0x20
Code: d503201f d503201f d2800001 aa0103e4 (c8e47c02)

Jon Hunter reports that the exact call sequence is:

hwmon_notify_event()
  --> hwmon_thermal_notify()
    --> thermal_zone_device_update()
      --> update_temperature()
        --> mutex_lock()

The hwmon core needs to handle all errors returned from calls
to devm_thermal_zone_of_sensor_register(). If the call fails
with -ENODEV, report that the sensor was not attached to a
thermal zone  but continue to register the hwmon device.

Reported-by: Jon Hunter <jonathanh@nvidia.com>
Cc: Dmitry Osipenko <digetx@gmail.com>
Fixes: 1597b374af222 ("hwmon: Add notification support")
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: (ntc_thermistor) Underscore Samsung thermistor 2022-02-20T00:47:54+00:00 Linus Walleij linus.walleij@linaro.org 2022-02-05T00:58:04+00:00 e23e40fd6de5c1c94793bc4147e8f34387d58576 The sysfs does not like that we name the thermistor something that contains a dash: ntc-thermistor thermistor: hwmon: 'ssg1404-001221' is not a valid name attribute, please fix Fix it up by switching to an underscore. Fixes: e13e979b2b3d ("hwmon: (ntc_thermistor) Add Samsung 1404-001221 NTC") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220205005804.123245-1-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
The sysfs does not like that we name the thermistor something
that contains a dash:

ntc-thermistor thermistor: hwmon: 'ssg1404-001221' is not a valid
name attribute, please fix

Fix it up by switching to an underscore.

Fixes: e13e979b2b3d ("hwmon: (ntc_thermistor) Add Samsung 1404-001221 NTC")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220205005804.123245-1-linus.walleij@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: (nct6775) Fix crash in clear_caseopen 2022-01-24T22:32:47+00:00 Guenter Roeck linux@roeck-us.net 2022-01-24T02:23:22+00:00 79da533d3cc717ccc05ddbd3190da8a72bc2408b Paweł Marciniak reports the following crash, observed when clearing the chassis intrusion alarm. BUG: kernel NULL pointer dereference, address: 0000000000000028 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 4815 Comm: bash Tainted: G S 5.16.2-200.fc35.x86_64 #1 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme4, BIOS P2.60A 05/03/2018 RIP: 0010:clear_caseopen+0x5a/0x120 [nct6775] Code: 68 70 e8 e9 32 b1 e3 85 c0 0f 85 d2 00 00 00 48 83 7c 24 ... RSP: 0018:ffffabcb02803dd8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: ffff8e8808192880 RSI: 0000000000000000 RDI: ffff8e87c7509a68 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000000a R10: 000000000000000a R11: f000000000000000 R12: 000000000000001f R13: ffff8e87c7509828 R14: ffff8e87c7509a68 R15: ffff8e88494527a0 FS: 00007f4db9151740(0000) GS:ffff8e8ebfec0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000166b66001 CR4: 00000000001706e0 Call Trace: <TASK> kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x10b/0x180 vfs_write+0x209/0x2a0 ksys_write+0x4f/0xc0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae The problem is that the device passed to clear_caseopen() is the hwmon device, not the platform device, and the platform data is not set in the hwmon device. Store the pointer to sio_data in struct nct6775_data and get if from there if needed. Fixes: 2e7b9886968b ("hwmon: (nct6775) Use superio_*() function pointers in sio_data.") Cc: Denis Pauk <pauk.denis@gmail.com> Cc: Bernhard Seibold <mail@bernhard-seibold.de> Reported-by: Paweł Marciniak <pmarciniak@lodz.home.pl> Tested-by: Denis Pauk <pauk.denis@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
Paweł Marciniak reports the following crash, observed when clearing
the chassis intrusion alarm.

BUG: kernel NULL pointer dereference, address: 0000000000000028
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 4815 Comm: bash Tainted: G S                5.16.2-200.fc35.x86_64 #1
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme4, BIOS P2.60A 05/03/2018
RIP: 0010:clear_caseopen+0x5a/0x120 [nct6775]
Code: 68 70 e8 e9 32 b1 e3 85 c0 0f 85 d2 00 00 00 48 83 7c 24 ...
RSP: 0018:ffffabcb02803dd8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
RDX: ffff8e8808192880 RSI: 0000000000000000 RDI: ffff8e87c7509a68
RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000000a
R10: 000000000000000a R11: f000000000000000 R12: 000000000000001f
R13: ffff8e87c7509828 R14: ffff8e87c7509a68 R15: ffff8e88494527a0
FS:  00007f4db9151740(0000) GS:ffff8e8ebfec0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000028 CR3: 0000000166b66001 CR4: 00000000001706e0
Call Trace:
 <TASK>
 kernfs_fop_write_iter+0x11c/0x1b0
 new_sync_write+0x10b/0x180
 vfs_write+0x209/0x2a0
 ksys_write+0x4f/0xc0
 do_syscall_64+0x3b/0x90
 entry_SYSCALL_64_after_hwframe+0x44/0xae

The problem is that the device passed to clear_caseopen() is the hwmon
device, not the platform device, and the platform data is not set in the
hwmon device. Store the pointer to sio_data in struct nct6775_data and
get if from there if needed.

Fixes: 2e7b9886968b ("hwmon: (nct6775) Use superio_*() function pointers in sio_data.")
Cc: Denis Pauk <pauk.denis@gmail.com>
Cc: Bernhard Seibold <mail@bernhard-seibold.de>
Reported-by: Paweł Marciniak <pmarciniak@lodz.home.pl>
Tested-by: Denis Pauk <pauk.denis@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: (adt7470) Prevent divide by zero in adt7470_fan_write() 2022-01-24T02:21:27+00:00 Dan Carpenter dan.carpenter@oracle.com 2022-01-21T11:55:43+00:00 c1ec0cabc36718efc7fe8b4157d41b82d08ec1d2 The "val" variable is controlled by the user and comes from hwmon_attr_store(). The FAN_RPM_TO_PERIOD() macro divides by "val" so a zero will crash the system. Check for that and return -EINVAL. Negatives are also invalid so return -EINVAL for those too. Fixes: fc958a61ff6d ("hwmon: (adt7470) Convert to devm_hwmon_device_register_with_info API") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
The "val" variable is controlled by the user and comes from
hwmon_attr_store().  The FAN_RPM_TO_PERIOD() macro divides by "val"
so a zero will crash the system.  Check for that and return -EINVAL.
Negatives are also invalid so return -EINVAL for those too.

Fixes: fc958a61ff6d ("hwmon: (adt7470) Convert to devm_hwmon_device_register_with_info API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: (pmbus/ir38064) Mark ir38064_of_match as __maybe_unused 2022-01-24T02:21:27+00:00 Guenter Roeck linux@roeck-us.net 2022-01-18T15:53:19+00:00 f1e75e0d6a1ae02fa4189d7aeebab623bade2a21 If CONFIG_PM is not enabled, the following warning is reported. drivers/hwmon/pmbus/ir38064.c:54:34: warning: unused variable 'ir38064_of_match' Mark it as __maybe_unused. Reported-by: kernel test robot <lkp@intel.com> Cc: Arthur Heymans <arthur.heymans@9elements.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
If CONFIG_PM is not enabled, the following warning is reported.

drivers/hwmon/pmbus/ir38064.c:54:34: warning:
	unused variable 'ir38064_of_match'

Mark it as __maybe_unused.

Reported-by: kernel test robot <lkp@intel.com>
Cc: Arthur Heymans <arthur.heymans@9elements.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hwmon: (lm90) Fix sysfs and udev notifications 2022-01-24T02:21:27+00:00 Guenter Roeck linux@roeck-us.net 2022-01-11T07:23:31+00:00 d379880d9adb9f1ada3f1266aa49ea2561328e08 sysfs and udev notifications need to be sent to the _alarm attributes, not to the value attributes. Fixes: 94dbd23ed88c ("hwmon: (lm90) Use hwmon_notify_event()") Cc: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> 
sysfs and udev notifications need to be sent to the _alarm
attributes, not to the value attributes.

Fixes: 94dbd23ed88c ("hwmon: (lm90) Use hwmon_notify_event()")
Cc: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>