linux-stable.git/drivers/hwmon, branch v5.14.2

Merge tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2021-07-05T20:42:16+00:00

Pull char / misc driver updates from Greg KH:
 "Here is the big set of char / misc and other driver subsystem updates
  for 5.14-rc1. Included in here are:

   - habanalabs driver updates

   - fsl-mc driver updates

   - comedi driver updates

   - fpga driver updates

   - extcon driver updates

   - interconnect driver updates

   - mei driver updates

   - nvmem driver updates

   - phy driver updates

   - pnp driver updates

   - soundwire driver updates

   - lots of other tiny driver updates for char and misc drivers

  This is looking more and more like the "various driver subsystems
  mushed together" tree...

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
  mcb: Use DEFINE_RES_MEM() helper macro and fix the end address
  PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable
  bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls
  bus: mhi: Wait for M2 state during system resume
  bus: mhi: core: Fix power down latency
  intel_th: Wait until port is in reset before programming it
  intel_th: msu: Make contiguous buffers uncached
  intel_th: Remove an unused exit point from intel_th_remove()
  stm class: Spelling fix
  nitro_enclaves: Set Bus Master for the NE PCI device
  misc: ibmasm: Modify matricies to matrices
  misc: vmw_vmci: return the correct errno code
  siox: Simplify error handling via dev_err_probe()
  fpga: machxo2-spi: Address warning about unused variable
  lkdtm/heap: Add init_on_alloc tests
  selftests/lkdtm: Enable various testable CONFIGs
  lkdtm: Add CONFIG hints in errors where possible
  lkdtm: Enable DOUBLE_FAULT on all architectures
  lkdtm/heap: Add vmalloc linear overflow test
  lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE
  ...

Merge tag 'fallthrough-fixes-clang-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

2021-06-29T03:03:38+00:00

Pull fallthrough fixes from Gustavo Silva:
 "Fix many fall-through warnings when building with Clang 12.0.0 and
  '-Wimplicit-fallthrough' so that we at some point will be able to
  enable that warning by default"

* tag 'fallthrough-fixes-clang-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (26 commits)
  rxrpc: Fix fall-through warnings for Clang
  drm/nouveau/clk: Fix fall-through warnings for Clang
  drm/nouveau/therm: Fix fall-through warnings for Clang
  drm/nouveau: Fix fall-through warnings for Clang
  xfs: Fix fall-through warnings for Clang
  xfrm: Fix fall-through warnings for Clang
  tipc: Fix fall-through warnings for Clang
  sctp: Fix fall-through warnings for Clang
  rds: Fix fall-through warnings for Clang
  net/packet: Fix fall-through warnings for Clang
  net: netrom: Fix fall-through warnings for Clang
  ide: Fix fall-through warnings for Clang
  hwmon: (max6621) Fix fall-through warnings for Clang
  hwmon: (corsair-cpro) Fix fall-through warnings for Clang
  firewire: core: Fix fall-through warnings for Clang
  braille_console: Fix fall-through warnings for Clang
  ipv4: Fix fall-through warnings for Clang
  qlcnic: Fix fall-through warnings for Clang
  bnxt_en: Fix fall-through warnings for Clang
  netxen_nic: Fix fall-through warnings for Clang
  ...

hwmon: Support set_trips() of thermal device ops

2021-06-24T14:15:28+00:00

Support set_trips() callback of thermal device ops. This allows HWMON
device to operatively notify thermal core about temperature changes, which
is very handy to have in a case where HWMON sensor is used by CPU thermal
zone that performs passive cooling and emergency shutdown on overheat.
Thermal core will be able to react faster to temperature changes.

The set_trips() callback is entirely optional. If HWMON sensor doesn't
support setting thermal trips, then the callback is a NO-OP. The dummy
callback has no effect on the thermal core. The temperature trips are
either complement the temperature polling mechanism of thermal core or
replace the polling if sensor can set the trips and polling is disabled
by a particular device in a device-tree.

Signed-off-by: Dmitry Osipenko 
Link: https://lore.kernel.org/r/20210623042231.16008-3-digetx@gmail.com
Signed-off-by: Guenter Roeck

hwmon: (lm90) Prevent integer underflows of temperature calculations

2021-06-24T14:14:27+00:00

The min/max/crit and all other temperature values that are passed to
the driver are unlimited and value that is close to INT_MIN results in
integer underflow of the temperature calculations made by the driver
for LM99 sensor. Temperature hysteresis is among those values that need
to be limited, but limiting of hysteresis is independent from the sensor
version. Add the missing limits.

Signed-off-by: Dmitry Osipenko 
Link: https://lore.kernel.org/r/20210623042231.16008-2-digetx@gmail.com
Signed-off-by: Guenter Roeck

hwmon: (lm90) Disable interrupt on suspend

2021-06-19T11:09:49+00:00

I2C accesses are prohibited and will error out after suspending of the
I2C controller, hence we need to ensure that interrupt won't fire on
suspend when it's too late. Disable interrupt across suspend/resume.

Signed-off-by: Dmitry Osipenko 
Signed-off-by: Guenter Roeck

hwmon: (lm90) Unmask hardware interrupt

2021-06-19T11:09:49+00:00

The ALERT interrupt is enabled by default after power-on, but it could
be masked by bootloader. For example this is the case on Acer A500 tablet
device. Unmask the hardware interrupt if interrupt is provided.

Signed-off-by: Dmitry Osipenko 
Signed-off-by: Guenter Roeck

hwmon: (lm90) Use hwmon_notify_event()

2021-06-19T11:09:49+00:00

Use hwmon_notify_event() to notify userspace and thermal core about
temperature changes.

Suggested-by: Guenter Roeck 
Signed-off-by: Dmitry Osipenko 
Signed-off-by: Guenter Roeck

hwmon: (lm90) Don't override interrupt trigger type

2021-06-19T11:09:49+00:00

The lm90 driver sets interrupt trigger type to level-low. This type is
not suitable for sensors like NCT1008 that don't deassert interrupt line
until temperature is back to normal, resulting in interrupt storm. The
appropriate trigger type should come from OF device description and
currently it's overridden by the driver's trigger type. Don't specify
the trigger type in the driver code, letting interrupt core to use the
device-specific trigger type.

Signed-off-by: Dmitry Osipenko 
Signed-off-by: Guenter Roeck

hwmon: (pmbus/dps920ab) Delete some dead code

2021-06-18T19:45:58+00:00

The debugfs_create_dir() function returns error pointers, it doesn't
return NULL.  But debugfs functions don't need to be checked in normal
situations and we can just delete this code.

Fixes: 1f442e213ce5 ("hwmon: (pmbus) Add driver for Delta DPS-920AB PSU")
Signed-off-by: Dan Carpenter 
Link: https://lore.kernel.org/r/YMyjmR54ErLtc1sH@mwanda
Signed-off-by: Guenter Roeck

hwmon: (ntc_thermistor) Drop unused headers.

2021-06-17T11:21:47+00:00

The IIO usage in this driver is purely consumer so it should only
be including linux/iio/consumer.h  Whilst here drop pm_runtime.h
as there is no runtime power management in the driver.

Found using include-what-you-use and manual inspection of the
suggestions.

Signed-off-by: Jonathan Cameron 
Cc: Guenter Roeck 
Link: https://lore.kernel.org/r/20210611142257.103094-1-jic23@kernel.org
Signed-off-by: Guenter Roeck