linux-stable.git/drivers/hwmon, branch v4.4.229

x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping

2020-06-11T07:21:40+00:00

commit b399151cb48db30ad1e0e93dd40d68c6d007b637 upstream.

x86_mask is a confusing name which is hard to associate with the
processor's stepping.

Additionally, correct an indent issue in lib/cpu.c.

[ Backport by Mark Gross to simplify the SRBDS backport ]

Signed-off-by: Jia Zhang 
[ Updated it to more recent kernels. ]
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: bp@alien8.de
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

hwmon: (adt7462) Fix an error return in ADT7462_REG_VOLT()

2020-03-11T06:51:18+00:00

commit 44f2f882909fedfc3a56e4b90026910456019743 upstream.

This is only called from adt7462_update_device().  The caller expects it
to return zero on error.  I fixed a similar issue earlier in commit
a4bf06d58f21 ("hwmon: (adt7462) ADT7462_REG_VOLT_MAX() should return 0")
but I missed this one.

Fixes: c0b4e3ab0c76 ("adt7462: new hwmon driver")
Signed-off-by: Dan Carpenter 
Reviewed-by: Darrick J. Wong 
Link: https://lore.kernel.org/r/20200303101608.kqjwfcazu2ylhi2a@kili.mountain
Signed-off-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

hwmon: (pmbus/ltc2978) Fix PMBus polling of MFR_COMMON definitions.

2020-02-28T14:38:50+00:00

commit cf2b012c90e74e85d8aea7d67e48868069cfee0c upstream.

Change 21537dc driver PMBus polling of MFR_COMMON from bits 5/4 to
bits 6/5. This fixs a LTC297X family bug where polling always returns
not busy even when the part is busy. This fixes a LTC388X and
LTM467X bug where polling used PEND and NOT_IN_TRANS, and BUSY was
not polled, which can lead to NACKing of commands. LTC388X and
LTM467X modules now poll BUSY and PEND, increasing reliability by
eliminating NACKing of commands.

Signed-off-by: Mike Jones 
Link: https://lore.kernel.org/r/1580234400-2829-2-git-send-email-michael-a1.jones@analog.com
Fixes: e04d1ce9bbb49 ("hwmon: (ltc2978) Add polling for chips requiring it")
Signed-off-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

hwmon: (nct7802) Fix voltage limits to wrong registers

2020-01-29T09:21:52+00:00

commit 7713e62c8623c54dac88d1fa724aa487a38c3efb upstream.

in0 thresholds are written to the in2 thresholds registers
in2 thresholds to in3 thresholds
in3 thresholds to in4 thresholds
in4 thresholds to in0 thresholds

Signed-off-by: Gilles Buloz 
Link: https://lore.kernel.org/r/5de0f509.rc0oEvPOMjbfPW1w%gilles.buloz@kontron.com
Fixes: 3434f3783580 ("hwmon: Driver for Nuvoton NCT7802Y")
Signed-off-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

hwmon: (adt7475) Make volt2reg return same reg as reg2volt input

2020-01-29T09:21:51+00:00

commit cf3ca1877574a306c0207cbf7fdf25419d9229df upstream.

reg2volt returns the voltage that matches a given register value.
Converting this back the other way with volt2reg didn't return the same
register value because it used truncation instead of rounding.

This meant that values read from sysfs could not be written back to sysfs
to set back the same register value.

With this change, volt2reg will return the same value for every voltage
previously returned by reg2volt (for the set of possible input values)

Signed-off-by: Luuk Paulussen 
Link: https://lore.kernel.org/r/20191205231659.1301-1-luuk.paulussen@alliedtelesis.co.nz
cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

hwmon: (shtc1) fix shtc1 and shtw1 id mask

2020-01-29T09:21:48+00:00

[ Upstream commit fdc7d8e829ec755c5cfb2f5a8d8c0cdfb664f895 ]

Fix an error in the bitmaskfor the shtc1 and shtw1 bitmask used to
retrieve the chip ID from the ID register. See section 5.7 of the shtw1
or shtc1 datasheet for details.

Fixes: 1a539d372edd9832444e7a3daa710c444c014dc9 ("hwmon: add support for Sensirion SHTC1 sensor")
Signed-off-by: Dan Robertson 
Link: https://lore.kernel.org/r/20190905014554.21658-3-dan@dlrobertson.com
[groeck: Reordered to be first in series and adjusted accordingly]
Signed-off-by: Guenter Roeck 
Signed-off-by: Sasha Levin

hwmon: (w83627hf) Use request_muxed_region for Super-IO accesses

2020-01-29T09:21:42+00:00

[ Upstream commit e95fd518d05bfc087da6fcdea4900a57cfb083bd ]

Super-IO accesses may fail on a system with no or unmapped LPC bus.

Also, other drivers may attempt to access the LPC bus at the same time,
resulting in undefined behavior.

Use request_muxed_region() to ensure that IO access on the requested
address space is supported, and to ensure that access by multiple drivers
is synchronized.

Fixes: b72656dbc491 ("hwmon: (w83627hf) Stop using globals for I/O port numbers")
Signed-off-by: Guenter Roeck 
Signed-off-by: Sasha Levin

hwmon: (pwm-fan) Silence error on probe deferral

2019-11-25T14:54:51+00:00

[ Upstream commit 9f67f7583e77fe5dc57aab3a6159c2642544eaad ]

Probe deferrals aren't actual errors, so silence the error message in
case the PWM cannot yet be acquired.

Signed-off-by: Thierry Reding 
Signed-off-by: Guenter Roeck 
Signed-off-by: Sasha Levin

hwmon: (acpi_power_meter) Change log level for 'unsafe software power cap'

2019-10-05T10:27:49+00:00

[ Upstream commit 6e4d91aa071810deac2cd052161aefb376ecf04e ]

At boot time, the acpi_power_meter driver logs the following error level
message: "Ignoring unsafe software power cap". Having read about it from
a few sources, it seems that the error message can be quite misleading.

While the message can imply that Linux is ignoring the fact that the
system is operating in potentially dangerous conditions, the truth is
the driver found an ACPI_PMC object that supports software power
capping. The driver simply decides not to use it, perhaps because it
doesn't support the object.

The best solution is probably changing the log level from error to warning.
All sources I have found, regarding the error, have downplayed its
significance. There is not much of a reason for it to be on error level,
while causing potential confusions or misinterpretations.

Signed-off-by: Wang Shenran 
Link: https://lore.kernel.org/r/20190724080110.6952-1-shenran268@gmail.com
Signed-off-by: Guenter Roeck 
Signed-off-by: Sasha Levin

hwmon: (nct7802) Fix wrong detection of in4 presence

2019-08-25T08:52:52+00:00

commit 38ada2f406a9b81fb1249c5c9227fa657e7d5671 upstream.

The code to detect if in4 is present is wrong; if in4 is not present,
the in4_input sysfs attribute is still present.

In detail:

- Ihen RTD3_MD=11 (VSEN3 present), everything is as expected (no bug).
- If we have RTD3_MD!=11 (no VSEN3), we unexpectedly have a in4_input
  file under /sys and the "sensors" command displays in4_input.
  But as expected, we have no in4_min, in4_max, in4_alarm, in4_beep.

Fix is_visible function to detect and report in4_input visibility
as expected.

Reported-by: Gilles Buloz 
Cc: Gilles Buloz 
Cc: stable@vger.kernel.org
Fixes: 3434f37835804 ("hwmon: Driver for Nuvoton NCT7802Y")
Signed-off-by: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman