linux-stable.git/drivers/hwmon, branch v3.2.62 Linux kernel stable tree hwmon: (adt7470) Fix writes to temperature limit registers 2014-08-06T17:07:38+00:00 Guenter Roeck linux@roeck-us.net 2014-07-17T00:40:31+00:00 f8bac1698272b067da1d45a7027661ea855eaad8 commit de12d6f4b10b21854441f5242dcb29ea96181e58 upstream. Temperature limit registers are signed. Limits therefore need to be clamped to (-128, 127) degrees C and not to (0, 255) degrees C. Without this fix, writing a limit of 128 degrees C sets the actual limit to -128 degrees C. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Axel Lin <axel.lin@ingics.com> [bwh: Backported to 3.2: driver was using SENSORS_LIMIT(), which we can replace with clamp_val()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit de12d6f4b10b21854441f5242dcb29ea96181e58 upstream.

Temperature limit registers are signed. Limits therefore need
to be clamped to (-128, 127) degrees C and not to (0, 255)
degrees C.

Without this fix, writing a limit of 128 degrees C sets the
actual limit to -128 degrees C.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
[bwh: Backported to 3.2: driver was using SENSORS_LIMIT(), which we can
 replace with clamp_val()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
hwmon: (emc2103) Clamp limits instead of bailing out 2014-08-06T17:07:36+00:00 Guenter Roeck linux@roeck-us.net 2014-07-06T18:39:24+00:00 831068ee2981914898798c1a7bd7988a2426b844 commit f6c2dd20108c35e30e2c1f3c6142d189451a626b upstream. It is customary to clamp limits instead of bailing out with an error if a configured limit is out of the range supported by the driver. This simplifies limit configuration, since the user will not typically know chip and/or driver specific limits. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit f6c2dd20108c35e30e2c1f3c6142d189451a626b upstream.

It is customary to clamp limits instead of bailing out with an error
if a configured limit is out of the range supported by the driver.
This simplifies limit configuration, since the user will not typically
know chip and/or driver specific limits.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
hwmon: (adm1031) Fix writes to limit registers 2014-08-06T17:07:36+00:00 Guenter Roeck linux@roeck-us.net 2014-07-03T20:44:23+00:00 a5931b2e8091230192d178a25f136f7bb3dc2177 commit 145e74a4e5022225adb84f4e5d4fff7938475c35 upstream. Upper limit for write operations to temperature limit registers was clamped to a fractional value. However, limit registers do not support fractional values. As a result, upper limits of 127.5 degrees C or higher resulted in a rounded limit of 128 degrees C. Since limit registers are signed, this was stored as -128 degrees C. Clamp limits to (-55, +127) degrees C to solve the problem. Value on writes to auto_temp[12]_min and auto_temp[12]_max were not clamped at all, but masked. As a result, out-of-range writes resulted in a more or less arbitrary limit. Clamp those attributes to (0, 127) degrees C for more predictable results. Cc: Axel Lin <axel.lin@ingics.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> [bwh: Backported to 3.2: - Adjust context - Driver was using SENSORS_LIMIT(), which we can replace with clamp_val()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 145e74a4e5022225adb84f4e5d4fff7938475c35 upstream.

Upper limit for write operations to temperature limit registers
was clamped to a fractional value. However, limit registers do
not support fractional values. As a result, upper limits of 127.5
degrees C or higher resulted in a rounded limit of 128 degrees C.
Since limit registers are signed, this was stored as -128 degrees C.
Clamp limits to (-55, +127) degrees C to solve the problem.

Value on writes to auto_temp[12]_min and auto_temp[12]_max were not
clamped at all, but masked. As a result, out-of-range writes resulted
in a more or less arbitrary limit. Clamp those attributes to (0, 127)
degrees C for more predictable results.

Cc: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[bwh: Backported to 3.2:
 - Adjust context
 - Driver was using SENSORS_LIMIT(), which we can replace with clamp_val()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
hwmon: (adm1029) Ensure the fan_div cache is updated in set_fan_div 2014-08-06T17:07:34+00:00 Axel Lin axel.lin@ingics.com 2014-07-02T00:29:55+00:00 1df779f8b094895bce7636e211b620646aaba2cc commit 1035a9e3e9c76b64a860a774f5b867d28d34acc2 upstream. Writing to fanX_div does not clear the cache. As a result, reading from fanX_div may return the old value for up to two seconds after writing a new value. This patch ensures the fan_div cache is updated in set_fan_div(). Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 1035a9e3e9c76b64a860a774f5b867d28d34acc2 upstream.

Writing to fanX_div does not clear the cache. As a result, reading
from fanX_div may return the old value for up to two seconds
after writing a new value.

This patch ensures the fan_div cache is updated in set_fan_div().

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
hwmon: (amc6821) Fix permissions for temp2_input 2014-08-06T17:07:34+00:00 Axel Lin axel.lin@ingics.com 2014-07-01T23:44:44+00:00 0d8f0631725937741074527722aa885c12aa7dce commit df86754b746e9a0ff6f863f690b1c01d408e3cdc upstream. temp2_input should not be writable, fix it. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit df86754b746e9a0ff6f863f690b1c01d408e3cdc upstream.

temp2_input should not be writable, fix it.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
hwmon: (emc1403) Support full range of known chip revision numbers 2014-06-09T12:29:11+00:00 Josef Gajdusek atx@atx.name 2014-05-12T11:48:26+00:00 66af111e424ad553c5f6823b53f45a9d2eb11d10 commit 3a18e1398fc2dc9c32bbdc50664da3a77959a8d1 upstream. The datasheet for EMC1413/EMC1414, which is fully compatible to EMC1403/1404 and uses the same chip identification, references revision numbers 0x01, 0x03, and 0x04. Accept the full range of revision numbers from 0x01 to 0x04 to make sure none are missed. Signed-off-by: Josef Gajdusek <atx@atx.name> [Guenter Roeck: Updated headline and description] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 3a18e1398fc2dc9c32bbdc50664da3a77959a8d1 upstream.

The datasheet for EMC1413/EMC1414, which is fully compatible to
EMC1403/1404 and uses the same chip identification, references revision
numbers 0x01, 0x03, and 0x04. Accept the full range of revision numbers
from 0x01 to 0x04 to make sure none are missed.

Signed-off-by: Josef Gajdusek <atx@atx.name>
[Guenter Roeck: Updated headline and description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
hwmon: (emc1403) fix inverted store_hyst() 2014-06-09T12:29:11+00:00 Josef Gajdusek atx@atx.name 2014-05-11T12:40:44+00:00 73b674fba353d3e37c1d26d5f5e5a34fa4104a9b commit 17c048fc4bd95efea208a1920f169547d8588f1f upstream. Attempts to set the hysteresis value to a temperature below the target limit fails with "write error: Numerical result out of range" due to an inverted comparison. Signed-off-by: Josef Gajdusek <atx@atx.name> Reviewed-by: Jean Delvare <jdelvare@suse.de> [Guenter Roeck: Updated headline and description] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 17c048fc4bd95efea208a1920f169547d8588f1f upstream.

Attempts to set the hysteresis value to a temperature below the target
limit fails with "write error: Numerical result out of range" due to
an inverted comparison.

Signed-off-by: Josef Gajdusek <atx@atx.name>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
[Guenter Roeck: Updated headline and description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
hwmon: (max1668) Fix writing the minimum temperature 2014-04-01T23:58:54+00:00 Guenter Roeck linux@roeck-us.net 2014-02-16T01:54:06+00:00 8553a06b06825d49b4727c8ce4c54bd6f3d873a8 commit 500a91571f0a5d0d3242d83802ea2fd1faccc66e upstream. When trying to set the minimum temperature, the driver was erroneously writing the maximum temperature into the chip. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 500a91571f0a5d0d3242d83802ea2fd1faccc66e upstream.

When trying to set the minimum temperature, the driver was erroneously
writing the maximum temperature into the chip.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
hwmon: (coretemp) Fix truncated name of alarm attributes 2014-02-15T19:20:17+00:00 Jean Delvare khali@linux-fr.org 2014-01-14T14:59:55+00:00 ded881cc1a89f5da729cab818d01055b15d0b07f commit 3f9aec7610b39521c7c69d754de7265f6994c194 upstream. When the core number exceeds 9, the size of the buffer storing the alarm attribute name is insufficient and the attribute name is truncated. This causes libsensors to skip these attributes as the truncated name is not recognized. Reported-by: Andreas Hollmann <hollmann@in.tum.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 3f9aec7610b39521c7c69d754de7265f6994c194 upstream.

When the core number exceeds 9, the size of the buffer storing the
alarm attribute name is insufficient and the attribute name is
truncated. This causes libsensors to skip these attributes as the
truncated name is not recognized.

Reported-by: Andreas Hollmann <hollmann@in.tum.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
hwmon: Prevent some divide by zeros in FAN_TO_REG() 2014-01-03T04:33:30+00:00 Dan Carpenter dan.carpenter@oracle.com 2013-12-12T07:05:33+00:00 cf3f5a3dbf78b72541dc9f295101cb90a5465d5c commit 3806b45ba4655147a011df03242cc197ab986c43 upstream. The "rpm * div" operations can overflow here, so this patch adds an upper limit to rpm to prevent that. Jean Delvare helped me with this patch. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Roger Lucas <vt8231@hiddenengine.co.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 3806b45ba4655147a011df03242cc197ab986c43 upstream.

The "rpm * div" operations can overflow here, so this patch adds an
upper limit to rpm to prevent that.  Jean Delvare helped me with this
patch.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Roger Lucas <vt8231@hiddenengine.co.uk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>