commit 4fccd4a1e8944033bcd7693ea4e8fb478cd2059a upstream.
Fix overflows seen when writing into fan speed limit attributes.
Also fix crash due to division by zero, seen when certain very
large values (such as 2147483648, or 0x80000000) are written
into fan speed limit attributes.
Fixes: 594fbe713bf60 ("Add support for GMT G762/G763 PWM fan controllers")
Cc: Arnaud Ebalard <arno@natisbad.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit e36ce99ee0815d7919a7b589bfb66f3de50b6bc7 upstream.
Module test reports:
temp1_max: Suspected overflow: [160000 vs. 0]
temp1_min: Suspected overflow: [160000 vs. 0]
This is seen because the values passed when writing temperature limits
are unbound.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Fixes: 6099469805c2 ("hwmon: Support for Dallas Semiconductor DS620")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit b53893aae441a034bf4dbbad42fe218561d7d81f upstream.
According to the datasheet you should only write 1 to this bit. If it is
not set, at least AIN3 will return bad values on newer silicon revisions.
Fixes: d84ca5b345c2 ("hwmon: Add driver for ADT7411 voltage and temperature sensor")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 3c2e2266a5bd2d1cef258e6e54dca1d99946379f upstream. arm:pxa_defconfig can result in the following crash if the max1111 driver is not instantiated. Unhandled fault: page domain fault (0x01b) at 0x00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: : 1b [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 300 Comm: kworker/0:1 Not tainted 4.5.0-01301-g1701f680407c #10 Hardware name: SHARP Akita Workqueue: events sharpsl_charge_toggle task: c390a000 ti: c391e000 task.ti: c391e000 PC is at max1111_read_channel+0x20/0x30 LR is at sharpsl_pm_pxa_read_max1111+0x2c/0x3c pc : [<c03aaab0>] lr : [<c0024b50>] psr: 20000013 ... [<c03aaab0>] (max1111_read_channel) from [<c0024b50>] (sharpsl_pm_pxa_read_max1111+0x2c/0x3c) [<c0024b50>] (sharpsl_pm_pxa_read_max1111) from [<c00262e0>] (spitzpm_read_devdata+0x5c/0xc4) [<c00262e0>] (spitzpm_read_devdata) from [<c0024094>] (sharpsl_check_battery_temp+0x78/0x110) [<c0024094>] (sharpsl_check_battery_temp) from [<c0024f9c>] (sharpsl_charge_toggle+0x48/0x110) [<c0024f9c>] (sharpsl_charge_toggle) from [<c004429c>] (process_one_work+0x14c/0x48c) [<c004429c>] (process_one_work) from [<c0044618>] (worker_thread+0x3c/0x5d4) [<c0044618>] (worker_thread) from [<c004a238>] (kthread+0xd0/0xec) [<c004a238>] (kthread) from [<c000a670>] (ret_from_fork+0x14/0x24) This can occur because the SPI controller driver (SPI_PXA2XX) is built as module and thus not necessarily loaded. While building SPI_PXA2XX into the kernel would make the problem disappear, it appears prudent to ensure that the driver is instantiated before accessing its data structures. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit cc904f9cf26dc455cffbdf6e7eb86717e047d8ff upstream. A new limit selected arbitrarily as power of two greater than required minimum for Xeon Phi processor (72 for Knights Landing). Currently driver is not able to handle cores with core ID greater than 32. Such attempt ends up with the following error in dmesg: coretemp coretemp.0: Adding Core XXX failed Signed-off-by: Lukasz Odzioba <lukasz.odzioba@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit acc146943957d7418a6846f06e029b2c5e87e0d5 upstream. Make the divisor signed as DIV_ROUND_CLOSEST is undefined for negative dividends when the divisor is unsigned. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 728d29400488d54974d3317fe8a232b45fdb42ee upstream. The STEP_UP_TIME and STEP_DOWN_TIME registers are swapped for all chips but NCT6775. Reported-by: Grazvydas Ignotas <notasas@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 347d7e45bd09ce09cbc30d5cea9de377eb22f55c upstream. The mcp3021 scaling code is dividing the VDD (full-scale) value in millivolts by the A2D resolution to obtain the scaling factor. When VDD is 3300mV (the standard value) and the resolution is 12-bit (4096 divisions), the result is a scale factor of 3300/4096, which is always one. Effectively, the raw A2D reading is always being returned because no scaling is applied. This patch fixes the issue and simplifies the register-to-volts calculation, removing the unneeded "output_scale" struct member. Signed-off-by: Nick Stevens <Nick.Stevens@digi.com> [Guenter Roeck: Dropped unnecessary value check] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit 1b63bf617206ff35b93c57c67bbe067ac735a85a upstream. The following error message is seen when loading the nct6775 driver with DEBUG_LOCK_ALLOC enabled. BUG: key ffff88040b2f0030 not in .data! ------------[ cut here ]------------ WARNING: CPU: 0 PID: 186 at kernel/locking/lockdep.c:2988 lockdep_init_map+0x469/0x630() DEBUG_LOCKS_WARN_ON(1) Caused by a missing call to sysfs_attr_init() when initializing sysfs attributes. Reported-by: Alexey Orishko <alexey.orishko@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
commit adba657533bdd255f7b78bc8a324091f46b294cd upstream. When configured via device tree, the associated iio device needs to be measuring voltage for the conversion to resistance to be correct. Return -EINVAL if that is not the case. Signed-off-by: Chris Lesiak <chris.lesiak@licor.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>