linux-stable.git/drivers/hwmon, branch v3.12.22 Linux kernel stable tree hwmon: (emc1403) Support full range of known chip revision numbers 2014-06-06T09:40:24+00:00 Josef Gajdusek atx@atx.name 2014-05-12T11:48:26+00:00 2e0cc42eaefa3fa3adf072130706f15e6b546638 commit 3a18e1398fc2dc9c32bbdc50664da3a77959a8d1 upstream. The datasheet for EMC1413/EMC1414, which is fully compatible to EMC1403/1404 and uses the same chip identification, references revision numbers 0x01, 0x03, and 0x04. Accept the full range of revision numbers from 0x01 to 0x04 to make sure none are missed. Signed-off-by: Josef Gajdusek <atx@atx.name> [Guenter Roeck: Updated headline and description] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 3a18e1398fc2dc9c32bbdc50664da3a77959a8d1 upstream.

The datasheet for EMC1413/EMC1414, which is fully compatible to
EMC1403/1404 and uses the same chip identification, references revision
numbers 0x01, 0x03, and 0x04. Accept the full range of revision numbers
from 0x01 to 0x04 to make sure none are missed.

Signed-off-by: Josef Gajdusek <atx@atx.name>
[Guenter Roeck: Updated headline and description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
hwmon: (emc1403) fix inverted store_hyst() 2014-06-06T09:40:24+00:00 Josef Gajdusek atx@atx.name 2014-05-11T12:40:44+00:00 f77cb78f4fd2951fa29bf80939ec41b3b21f9e06 commit 17c048fc4bd95efea208a1920f169547d8588f1f upstream. Attempts to set the hysteresis value to a temperature below the target limit fails with "write error: Numerical result out of range" due to an inverted comparison. Signed-off-by: Josef Gajdusek <atx@atx.name> Reviewed-by: Jean Delvare <jdelvare@suse.de> [Guenter Roeck: Updated headline and description] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 17c048fc4bd95efea208a1920f169547d8588f1f upstream.

Attempts to set the hysteresis value to a temperature below the target
limit fails with "write error: Numerical result out of range" due to
an inverted comparison.

Signed-off-by: Josef Gajdusek <atx@atx.name>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
[Guenter Roeck: Updated headline and description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
hwmon: (max1668) Fix writing the minimum temperature 2014-03-05T16:13:50+00:00 Guenter Roeck linux@roeck-us.net 2014-02-16T01:54:06+00:00 8a7cf765fa2a06c0e1e70dec1c68fc71c3ad27c8 commit 500a91571f0a5d0d3242d83802ea2fd1faccc66e upstream. When trying to set the minimum temperature, the driver was erroneously writing the maximum temperature into the chip. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 500a91571f0a5d0d3242d83802ea2fd1faccc66e upstream.

When trying to set the minimum temperature, the driver was erroneously
writing the maximum temperature into the chip.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
hwmon: (ntc_thermistor) Avoid math overflow 2014-02-22T21:32:26+00:00 Doug Anderson dianders@chromium.org 2014-02-13T22:39:34+00:00 8c2d483428e53ce4a532f340471e25e79c0ec1f5 commit d3d89c468ceebbcf9423d1a3d66c5bf91f569570 upstream. The ntc thermistor code was doing math whose temporary result might have overflowed 32-bits. We need some casts in there to make it safe. In one example I found: - pullup_uV: 1800000 - result of iio_read_channel_raw: 3226 - 1800000 * 3226 => 0x15a1cbc80 Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d3d89c468ceebbcf9423d1a3d66c5bf91f569570 upstream.

The ntc thermistor code was doing math whose temporary result might
have overflowed 32-bits.  We need some casts in there to make it safe.

In one example I found:
- pullup_uV: 1800000
- result of iio_read_channel_raw: 3226
- 1800000 * 3226 => 0x15a1cbc80

Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hwmon: (k10temp) Add support for Kaveri CPUs 2014-02-06T19:22:17+00:00 Phil Pokorny ppokorny@penguincomputing.com 2014-01-14T18:46:46+00:00 9c7d51ca3d6acdcd3fa0aff2e6f6a7bdfb8e2d85 commit d303b1b5fbb688282bbf72a534b9dfed7af9fe4f upstream. Add new PCI ID to support new model "Kaveri" family. Signed-off-by: Philip Pokorny <ppokorny@penguincomputing.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d303b1b5fbb688282bbf72a534b9dfed7af9fe4f upstream.

Add new PCI ID to support new model "Kaveri" family.

Signed-off-by: Philip Pokorny <ppokorny@penguincomputing.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hwmon: (coretemp) Fix truncated name of alarm attributes 2014-01-25T16:49:28+00:00 Jean Delvare khali@linux-fr.org 2014-01-14T14:59:55+00:00 19519d5b684f9471bc9666858a1a0e7768985821 commit 3f9aec7610b39521c7c69d754de7265f6994c194 upstream. When the core number exceeds 9, the size of the buffer storing the alarm attribute name is insufficient and the attribute name is truncated. This causes libsensors to skip these attributes as the truncated name is not recognized. Reported-by: Andreas Hollmann <hollmann@in.tum.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3f9aec7610b39521c7c69d754de7265f6994c194 upstream.

When the core number exceeds 9, the size of the buffer storing the
alarm attribute name is insufficient and the attribute name is
truncated. This causes libsensors to skip these attributes as the
truncated name is not recognized.

Reported-by: Andreas Hollmann <hollmann@in.tum.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hwmon: (w83l768ng) Fix fan speed control range 2013-12-20T15:48:53+00:00 Jean Delvare khali@linux-fr.org 2013-12-12T07:05:32+00:00 51f3ae937ca288978ab3c63ec2ae48d687cb3347 commit 33a7ab91d509fa33b4bcd3ce0038cc80298050da upstream. The W83L786NG stores the fan speed on 4 bits while the sysfs interface uses a 0-255 range. Thus the driver should scale the user input down to map it to the device range, and scale up the value read from the device before presenting it to the user. The reserved register nibble should be left unchanged. Signed-off-by: Jean Delvare <khali@linux-fr.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 33a7ab91d509fa33b4bcd3ce0038cc80298050da upstream.

The W83L786NG stores the fan speed on 4 bits while the sysfs interface
uses a 0-255 range. Thus the driver should scale the user input down
to map it to the device range, and scale up the value read from the
device before presenting it to the user. The reserved register nibble
should be left unchanged.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hwmon: (w83l786ng) Fix fan speed control mode setting and reporting 2013-12-20T15:48:53+00:00 Brian Carnes bmcarnes@gmail.com 2013-12-12T07:05:32+00:00 edf0afdbe45326982177055e7551b3b7e7d1e8eb commit cf7559bc053471f32373d71d04a9aa19e0b48d59 upstream. The wrong mask is used, which causes some fan speed control modes (pwmX_enable) to be incorrectly reported, and some modes to be impossible to set. [JD: add subject and description.] Signed-off-by: Brian Carnes <bmcarnes@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit cf7559bc053471f32373d71d04a9aa19e0b48d59 upstream.

The wrong mask is used, which causes some fan speed control modes
(pwmX_enable) to be incorrectly reported, and some modes to be
impossible to set.

[JD: add subject and description.]

Signed-off-by: Brian Carnes <bmcarnes@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hwmon: HIH-6130: Support I2C bus drivers without I2C_FUNC_SMBUS_QUICK 2013-12-20T15:48:53+00:00 José Miguel Gonçalves jose.goncalves@inov.pt 2013-12-11T11:11:13+00:00 45e569b558a59837f88d8eda7527d7c50154d75d commit efabcc2123f0ed47870033b8d6fc73b50d76d635 upstream. Some I2C bus drivers do not allow zero-length data transfers which are required to start a measurement with the HIH6130/1 sensor. Nevertheless, we can overcome this limitation by writing a zero dummy byte. This byte is ignored by the sensor and was verified to be working with the OMAP I2C bus driver in a BeagleBone board. Signed-off-by: José Miguel Gonçalves <jose.goncalves@inov.pt> [Guenter Roeck: Simplified complexity of write_length initialization] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit efabcc2123f0ed47870033b8d6fc73b50d76d635 upstream.

Some I2C bus drivers do not allow zero-length data transfers which are
required to start a measurement with the HIH6130/1 sensor. Nevertheless,
we can overcome this limitation by writing a zero dummy byte. This byte
is ignored by the sensor and was verified to be working with the OMAP
I2C bus driver in a BeagleBone board.

Signed-off-by: José Miguel Gonçalves <jose.goncalves@inov.pt>
[Guenter Roeck: Simplified complexity of write_length initialization]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hwmon: Prevent some divide by zeros in FAN_TO_REG() 2013-12-20T15:48:52+00:00 Dan Carpenter dan.carpenter@oracle.com 2013-12-12T07:05:33+00:00 e6ddcefc7e3694fdf85703b366d35b4bdb1b89fd commit 3806b45ba4655147a011df03242cc197ab986c43 upstream. The "rpm * div" operations can overflow here, so this patch adds an upper limit to rpm to prevent that. Jean Delvare helped me with this patch. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Roger Lucas <vt8231@hiddenengine.co.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3806b45ba4655147a011df03242cc197ab986c43 upstream.

The "rpm * div" operations can overflow here, so this patch adds an
upper limit to rpm to prevent that.  Jean Delvare helped me with this
patch.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Roger Lucas <vt8231@hiddenengine.co.uk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>