linux-stable.git/drivers/hv, branch v5.4.232 Linux kernel stable tree Drivers: hv: vmbus: fix possible memory leak in vmbus_device_register() 2022-12-08T10:22:58+00:00 Yang Yingliang yangyingliang@huawei.com 2022-11-19T08:11:35+00:00 00492f823f30edde147a22e36b38a0feaeca3b9c [ Upstream commit 25c94b051592c010abe92c85b0485f1faedc83f3 ] If device_register() returns error in vmbus_device_register(), the name allocated by dev_set_name() must be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(). Fixes: 09d50ff8a233 ("Staging: hv: make the Hyper-V virtual bus code build") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20221119081135.1564691-3-yangyingliang@huawei.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 25c94b051592c010abe92c85b0485f1faedc83f3 ]

If device_register() returns error in vmbus_device_register(),
the name allocated by dev_set_name() must be freed. As comment
of device_register() says, it should use put_device() to give
up the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanup().

Fixes: 09d50ff8a233 ("Staging: hv: make the Hyper-V virtual bus code build")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20221119081135.1564691-3-yangyingliang@huawei.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Drivers: hv: vmbus: fix double free in the error path of vmbus_add_channel_work() 2022-12-08T10:22:58+00:00 Yang Yingliang yangyingliang@huawei.com 2022-11-19T08:11:34+00:00 e0d5becab1d09320eda79ef2ff3ed9b2b9345cb1 [ Upstream commit f92a4b50f0bd7fd52391dc4bb9a309085d278f91 ] In the error path of vmbus_device_register(), device_unregister() is called, which calls vmbus_device_release(). The latter frees the struct hv_device that was passed in to vmbus_device_register(). So remove the kfree() in vmbus_add_channel_work() to avoid a double free. Fixes: c2e5df616e1a ("vmbus: add per-channel sysfs info") Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20221119081135.1564691-2-yangyingliang@huawei.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f92a4b50f0bd7fd52391dc4bb9a309085d278f91 ]

In the error path of vmbus_device_register(), device_unregister()
is called, which calls vmbus_device_release().  The latter frees
the struct hv_device that was passed in to vmbus_device_register().
So remove the kfree() in vmbus_add_channel_work() to avoid a double
free.

Fixes: c2e5df616e1a ("vmbus: add per-channel sysfs info")
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20221119081135.1564691-2-yangyingliang@huawei.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Drivers: hv: Never allocate anything besides framebuffer from framebuffer memory region 2022-09-28T09:04:08+00:00 Vitaly Kuznetsov vkuznets@redhat.com 2022-08-27T13:03:45+00:00 0b467eab0aad636ec78067687d632adcb3f04230 [ Upstream commit f0880e2cb7e1f8039a048fdd01ce45ab77247221 ] Passed through PCI device sometimes misbehave on Gen1 VMs when Hyper-V DRM driver is also loaded. Looking at IOMEM assignment, we can see e.g. $ cat /proc/iomem ... f8000000-fffbffff : PCI Bus 0000:00 f8000000-fbffffff : 0000:00:08.0 f8000000-f8001fff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe ... fe0000000-fffffffff : PCI Bus 0000:00 fe0000000-fe07fffff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe fe0000000-fe07fffff : 2ba2:00:02.0 fe0000000-fe07fffff : mlx4_core the interesting part is the 'f8000000' region as it is actually the VM's framebuffer: $ lspci -v ... 0000:00:08.0 VGA compatible controller: Microsoft Corporation Hyper-V virtual VGA (prog-if 00 [VGA controller]) Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f8000000 (32-bit, non-prefetchable) [size=64M] ... hv_vmbus: registering driver hyperv_drm hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Synthvid Version major 3, minor 5 hyperv_drm 0000:00:08.0: vgaarb: deactivate vga console hyperv_drm 0000:00:08.0: BAR 0: can't reserve [mem 0xf8000000-0xfbffffff] hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Cannot request framebuffer, boot fb still active? Note: "Cannot request framebuffer" is not a fatal error in hyperv_setup_gen1() as the code assumes there's some other framebuffer device there but we actually have some other PCI device (mlx4 in this case) config space there! The problem appears to be that vmbus_allocate_mmio() can use dedicated framebuffer region to serve any MMIO request from any device. The semantics one might assume of a parameter named "fb_overlap_ok" aren't implemented because !fb_overlap_ok essentially has no effect. The existing semantics are really "prefer_fb_overlap". This patch implements the expected and needed semantics, which is to not allocate from the frame buffer space when !fb_overlap_ok. Note, Gen2 VMs are usually unaffected by the issue because framebuffer region is already taken by EFI fb (in case kernel supports it) but Gen1 VMs may have this region unclaimed by the time Hyper-V PCI pass-through driver tries allocating MMIO space if Hyper-V DRM/FB drivers load after it. Devices can be brought up in any sequence so let's resolve the issue by always ignoring 'fb_mmio' region for non-FB requests, even if the region is unclaimed. Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/20220827130345.1320254-4-vkuznets@redhat.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit f0880e2cb7e1f8039a048fdd01ce45ab77247221 ]

Passed through PCI device sometimes misbehave on Gen1 VMs when Hyper-V
DRM driver is also loaded. Looking at IOMEM assignment, we can see e.g.

$ cat /proc/iomem
...
f8000000-fffbffff : PCI Bus 0000:00
  f8000000-fbffffff : 0000:00:08.0
    f8000000-f8001fff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe
...
fe0000000-fffffffff : PCI Bus 0000:00
  fe0000000-fe07fffff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe
    fe0000000-fe07fffff : 2ba2:00:02.0
      fe0000000-fe07fffff : mlx4_core

the interesting part is the 'f8000000' region as it is actually the
VM's framebuffer:

$ lspci -v
...
0000:00:08.0 VGA compatible controller: Microsoft Corporation Hyper-V virtual VGA (prog-if 00 [VGA controller])
	Flags: bus master, fast devsel, latency 0, IRQ 11
	Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
...

 hv_vmbus: registering driver hyperv_drm
 hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Synthvid Version major 3, minor 5
 hyperv_drm 0000:00:08.0: vgaarb: deactivate vga console
 hyperv_drm 0000:00:08.0: BAR 0: can't reserve [mem 0xf8000000-0xfbffffff]
 hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Cannot request framebuffer, boot fb still active?

Note: "Cannot request framebuffer" is not a fatal error in
hyperv_setup_gen1() as the code assumes there's some other framebuffer
device there but we actually have some other PCI device (mlx4 in this
case) config space there!

The problem appears to be that vmbus_allocate_mmio() can use dedicated
framebuffer region to serve any MMIO request from any device. The
semantics one might assume of a parameter named "fb_overlap_ok"
aren't implemented because !fb_overlap_ok essentially has no effect.
The existing semantics are really "prefer_fb_overlap". This patch
implements the expected and needed semantics, which is to not allocate
from the frame buffer space when !fb_overlap_ok.

Note, Gen2 VMs are usually unaffected by the issue because
framebuffer region is already taken by EFI fb (in case kernel supports
it) but Gen1 VMs may have this region unclaimed by the time Hyper-V PCI
pass-through driver tries allocating MMIO space if Hyper-V DRM/FB drivers
load after it. Devices can be brought up in any sequence so let's
resolve the issue by always ignoring 'fb_mmio' region for non-FB
requests, even if the region is unclaimed.

Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20220827130345.1320254-4-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
random: remove unused irq_flags argument from add_interrupt_randomness() 2022-06-22T12:11:06+00:00 Sebastian Andrzej Siewior bigeasy@linutronix.de 2021-12-07T12:17:33+00:00 6e6ae70c1eac27d3f58726a8f1037269ab2e81ab commit 703f7066f40599c290babdb79dd61319264987e9 upstream. Since commit ee3e00e9e7101 ("random: use registers from interrupted code for CPU's w/o a cycle counter") the irq_flags argument is no longer used. Remove unused irq_flags. Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Liu <wei.liu@kernel.org> Cc: linux-hyperv@vger.kernel.org Cc: x86@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 703f7066f40599c290babdb79dd61319264987e9 upstream.

Since commit
   ee3e00e9e7101 ("random: use registers from interrupted code for CPU's w/o a cycle counter")

the irq_flags argument is no longer used.

Remove unused irq_flags.

Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: linux-hyperv@vger.kernel.org
Cc: x86@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drivers: hv: vmbus: Prevent load re-ordering when reading ring buffer 2022-04-20T07:19:36+00:00 Michael Kelley mikelley@microsoft.com 2022-03-27T15:25:10+00:00 70b97c1546f9553c3672e5217b1d04da489790e1 [ Upstream commit b6cae15b5710c8097aad26a2e5e752c323ee5348 ] When reading a packet from a host-to-guest ring buffer, there is no memory barrier between reading the write index (to see if there is a packet to read) and reading the contents of the packet. The Hyper-V host uses store-release when updating the write index to ensure that writes of the packet data are completed first. On the guest side, the processor can reorder and read the packet data before the write index, and sometimes get stale packet data. Getting such stale packet data has been observed in a reproducible case in a VM on ARM64. Fix this by using virt_load_acquire() to read the write index, ensuring that reads of the packet data cannot be reordered before it. Preventing such reordering is logically correct, and with this change, getting stale data can no longer be reproduced. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/1648394710-33480-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b6cae15b5710c8097aad26a2e5e752c323ee5348 ]

When reading a packet from a host-to-guest ring buffer, there is no
memory barrier between reading the write index (to see if there is
a packet to read) and reading the contents of the packet. The Hyper-V
host uses store-release when updating the write index to ensure that
writes of the packet data are completed first. On the guest side,
the processor can reorder and read the packet data before the write
index, and sometimes get stale packet data. Getting such stale packet
data has been observed in a reproducible case in a VM on ARM64.

Fix this by using virt_load_acquire() to read the write index,
ensuring that reads of the packet data cannot be reordered
before it. Preventing such reordering is logically correct, and
with this change, getting stale data can no longer be reproduced.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/1648394710-33480-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Drivers: hv: vmbus: Fix potential crash on module unload 2022-04-15T12:18:37+00:00 Guilherme G. Piccoli gpiccoli@igalia.com 2022-03-15T20:35:35+00:00 2133c422a103cf7c7768c37b9ac382e73b691892 [ Upstream commit 792f232d57ff28bbd5f9c4abe0466b23d5879dc8 ] The vmbus driver relies on the panic notifier infrastructure to perform some operations when a panic event is detected. Since vmbus can be built as module, it is required that the driver handles both registering and unregistering such panic notifier callback. After commit 74347a99e73a ("x86/Hyper-V: Unload vmbus channel in hv panic callback") though, the panic notifier registration is done unconditionally in the module initialization routine whereas the unregistering procedure is conditionally guarded and executes only if HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE capability is set. This patch fixes that by unconditionally unregistering the panic notifier in the module's exit routine as well. Fixes: 74347a99e73a ("x86/Hyper-V: Unload vmbus channel in hv panic callback") Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220315203535.682306-1-gpiccoli@igalia.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 792f232d57ff28bbd5f9c4abe0466b23d5879dc8 ]

The vmbus driver relies on the panic notifier infrastructure to perform
some operations when a panic event is detected. Since vmbus can be built
as module, it is required that the driver handles both registering and
unregistering such panic notifier callback.

After commit 74347a99e73a ("x86/Hyper-V: Unload vmbus channel in hv panic callback")
though, the panic notifier registration is done unconditionally in the module
initialization routine whereas the unregistering procedure is conditionally
guarded and executes only if HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE capability
is set.

This patch fixes that by unconditionally unregistering the panic notifier
in the module's exit routine as well.

Fixes: 74347a99e73a ("x86/Hyper-V: Unload vmbus channel in hv panic callback")
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220315203535.682306-1-gpiccoli@igalia.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hv_balloon: rate-limit "Unhandled message" warning 2022-04-15T12:18:15+00:00 Anssi Hannula anssi.hannula@bitwise.fi 2022-02-22T14:14:00+00:00 6f41e4a69ba350704a07ac681c3fd8ab20666f63 [ Upstream commit 1d7286729aa616772be334eb908e11f527e1e291 ] For a couple of times I have encountered a situation where hv_balloon: Unhandled message: type: 12447 is being flooded over 1 million times per second with various values, filling the log and consuming cycles, making debugging difficult. Add rate limiting to the message. Most other Hyper-V drivers already have similar rate limiting in their message callbacks. The cause of the floods in my case was probably fixed by 96d9d1fa5cd5 ("Drivers: hv: balloon: account for vmbus packet header in max_pkt_size"). Fixes: 9aa8b50b2b3d ("Drivers: hv: Add Hyper-V balloon driver") Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220222141400.98160-1-anssi.hannula@bitwise.fi Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1d7286729aa616772be334eb908e11f527e1e291 ]

For a couple of times I have encountered a situation where

  hv_balloon: Unhandled message: type: 12447

is being flooded over 1 million times per second with various values,
filling the log and consuming cycles, making debugging difficult.

Add rate limiting to the message.

Most other Hyper-V drivers already have similar rate limiting in their
message callbacks.

The cause of the floods in my case was probably fixed by 96d9d1fa5cd5
("Drivers: hv: balloon: account for vmbus packet header in
max_pkt_size").

Fixes: 9aa8b50b2b3d ("Drivers: hv: Add Hyper-V balloon driver")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220222141400.98160-1-anssi.hannula@bitwise.fi
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobj 2022-02-23T11:00:00+00:00 Miaoqian Lin linmq006@gmail.com 2022-02-03T17:30:08+00:00 fe595759c2a4a5bb41c438474f15947d8ae32f5c [ Upstream commit 8bc69f86328e87a0ffa79438430cc82f3aa6a194 ] kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add()： If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix memory leak by calling kobject_put(). Fixes: c2e5df616e1a ("vmbus: add per-channel sysfs info") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Juan Vazquez <juvazq@linux.microsoft.com> Link: https://lore.kernel.org/r/20220203173008.43480-1-linmq006@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8bc69f86328e87a0ffa79438430cc82f3aa6a194 ]

kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()：

   If this function returns an error, kobject_put() must be called to
   properly clean up the memory associated with the object.

Fix memory leak by calling kobject_put().

Fixes: c2e5df616e1a ("vmbus: add per-channel sysfs info")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Juan Vazquez <juvazq@linux.microsoft.com>
Link: https://lore.kernel.org/r/20220203173008.43480-1-linmq006@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hyperv/vmbus: include linux/bitops.h 2021-11-17T08:48:20+00:00 Arnd Bergmann arnd@arndb.de 2021-10-18T13:19:08+00:00 f09014e8bea8580223b94bba5892e2b132a683c7 [ Upstream commit 8017c99680fa65e1e8d999df1583de476a187830 ] On arm64 randconfig builds, hyperv sometimes fails with this error: In file included from drivers/hv/hv_trace.c:3: In file included from drivers/hv/hyperv_vmbus.h:16: In file included from arch/arm64/include/asm/sync_bitops.h:5: arch/arm64/include/asm/bitops.h:11:2: error: only <linux/bitops.h> can be included directly In file included from include/asm-generic/bitops/hweight.h:5: include/asm-generic/bitops/arch_hweight.h:9:9: error: implicit declaration of function '__sw_hweight32' [-Werror,-Wimplicit-function-declaration] include/asm-generic/bitops/atomic.h:17:7: error: implicit declaration of function 'BIT_WORD' [-Werror,-Wimplicit-function-declaration] Include the correct header first. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211018131929.2260087-1-arnd@kernel.org Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8017c99680fa65e1e8d999df1583de476a187830 ]

On arm64 randconfig builds, hyperv sometimes fails with this
error:

In file included from drivers/hv/hv_trace.c:3:
In file included from drivers/hv/hyperv_vmbus.h:16:
In file included from arch/arm64/include/asm/sync_bitops.h:5:
arch/arm64/include/asm/bitops.h:11:2: error: only <linux/bitops.h> can be included directly
In file included from include/asm-generic/bitops/hweight.h:5:
include/asm-generic/bitops/arch_hweight.h:9:9: error: implicit declaration of function '__sw_hweight32' [-Werror,-Wimplicit-function-declaration]
include/asm-generic/bitops/atomic.h:17:7: error: implicit declaration of function 'BIT_WORD' [-Werror,-Wimplicit-function-declaration]

Include the correct header first.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211018131929.2260087-1-arnd@kernel.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
hv_utils: Fix passing zero to 'PTR_ERR' warning 2021-07-14T14:53:16+00:00 YueHaibing yuehaibing@huawei.com 2021-05-14T07:01:16+00:00 865c6e210bd431e2594620523edda1aec4e17af3 [ Upstream commit c6a8625fa4c6b0a97860d053271660ccedc3d1b3 ] Sparse warn this: drivers/hv/hv_util.c:753 hv_timesync_init() warn: passing zero to 'PTR_ERR' Use PTR_ERR_OR_ZERO instead of PTR_ERR to fix this. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20210514070116.16800-1-yuehaibing@huawei.com [ wei: change %ld to %d ] Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c6a8625fa4c6b0a97860d053271660ccedc3d1b3 ]

Sparse warn this:

drivers/hv/hv_util.c:753 hv_timesync_init() warn:
 passing zero to 'PTR_ERR'

Use PTR_ERR_OR_ZERO instead of PTR_ERR to fix this.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210514070116.16800-1-yuehaibing@huawei.com
[ wei: change %ld to %d ]
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>