commit 6fd28941447bf2c8ca0f26fda612a1cabc41663f upstream.
Rescind offer handling relies on rescind callbacks for some of the
resources cleanup, if they are registered. It does not unregister
vmbus device for the primary channel closure, when callback is
registered. Without it, next onoffer does not come, rescind flag
remains set and device goes to unusable state.
Add logic to unregister vmbus for the primary channel in rescind callback
to ensure channel removal and relid release, and to ensure that next
onoffer can be received and handled properly.
Cc: stable@vger.kernel.org
Fixes: ca3cda6fcf1e ("uio_hv_generic: add rescind support")
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240829071312.1595-3-namjain@linux.microsoft.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix issues reported by checkpatch.pl script in hv.c and balloon.c - Remove unnecessary parentheses - Remove extra newlines - Remove extra spaces - Add spaces between comparison operators - Remove comparison with NULL in if statements No functional changes intended Signed-off-by: Aditya Nagesh <adityanagesh@linux.microsoft.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/1717152521-6439-1-git-send-email-adityanagesh@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1717152521-6439-1-git-send-email-adityanagesh@linux.microsoft.com>
The Hyper-V balloon driver supports hot-add of memory in addition
to ballooning. Current code hot-adds in fixed size chunks of
128 MiB (fixed constant HA_CHUNK in the code). While this works
in Hyper-V VMs with 64 GiB or less or memory where the Linux
memblock size is 128 MiB, the hot-add fails for larger memblock
sizes because add_memory() expects memory to be added in chunks
that match the memblock size. Messages like the following are
reported when Linux has a 256 MiB memblock size:
[ 312.668859] Block size [0x10000000] unaligned hotplug range:
start 0x310000000, size 0x8000000
[ 312.668880] hv_balloon: hot_add memory failed error is -22
[ 312.668984] hv_balloon: Memory hot add failed
Larger memblock sizes are usually used in VMs with more than
64 GiB of memory, depending on the alignment of the VM's
physical address space.
Fix this problem by having the Hyper-V balloon driver determine
the Linux memblock size, and process hot-add requests in that
chunk size instead of a fixed 128 MiB. Also update the hot-add
alignment requested of the Hyper-V host to match the memblock
size.
The code changes look significant, but in fact are just a
simple text substitution of a new global variable for the
previous HA_CHUNK constant. No algorithms are changed except
to initialize the new global variable and to calculate the
alignment value to pass to Hyper-V. Testing with memblock
sizes of 256 MiB and 2 GiB shows correct operation.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240503154312.142466-2-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240503154312.142466-2-mhklinux@outlook.com>
Code sequences equivalent to ALIGN(), ALIGN_DOWN(), and umin() are currently open coded. Change these to use the kernel macro to improve code clarity. ALIGN() and ALIGN_DOWN() require the alignment value to be a power of 2, which is the case here. Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20240503154312.142466-1-mhklinux@outlook.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20240503154312.142466-1-mhklinux@outlook.com>
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
The dma_base, size and iommu arguments are only used by ARM, and can now easily be deduced from the device itself, so there's no need to pass them through the callchain as well. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Michael Kelley <mhklinux@outlook.com> # For Hyper-V Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/5291c2326eab405b1aa7693aa964e8d3cb7193de.1713523152.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
We need the char/misc fixes in here as well to work off of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull hyperv fixes from Wei Liu: - Some cosmetic changes (Erni Sri Satya Vennela, Li Zhijian) - Introduce hv_numa_node_to_pxm_info() (Nuno Das Neves) - Fix KVP daemon to handle IPv4 and IPv6 combination for keyfile format (Shradha Gupta) - Avoid freeing decrypted memory in a confidential VM (Rick Edgecombe and Michael Kelley) * tag 'hyperv-fixes-signed-20240411' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: vmbus: Don't free ring buffers that couldn't be re-encrypted uio_hv_generic: Don't free decrypted memory hv_netvsc: Don't free decrypted memory Drivers: hv: vmbus: Track decrypted status in vmbus_gpadl Drivers: hv: vmbus: Leak pages if set_memory_encrypted() fails hv/hv_kvp_daemon: Handle IPv4 and Ipv6 combination for keyfile format hv: vmbus: Convert sprintf() family to sysfs_emit() family mshyperv: Introduce hv_numa_node_to_pxm_info() x86/hyperv: Cosmetic changes for hv_apic.c
As the new fcopy driver using uio is introduced, remove obsolete driver and application. Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Link: https://lore.kernel.org/r/1711788723-8593-7-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>