linux-stable.git/drivers/hid, branch v5.4.261

hid: cp2112: Fix duplicate workqueue initialization

2023-11-20T09:30:12+00:00

[ Upstream commit e3c2d2d144c082dd71596953193adf9891491f42 ]

Previously the cp2112 driver called INIT_DELAYED_WORK within
cp2112_gpio_irq_startup, resulting in duplicate initilizations of the
workqueue on subsequent IRQ startups following an initial request. This
resulted in a warning in set_work_data in workqueue.c, as well as a rare
NULL dereference within process_one_work in workqueue.c.

Initialize the workqueue within _probe instead.

Fixes: 13de9cca514e ("HID: cp2112: add IRQ chip handling")
Signed-off-by: Danny Kaehn 
Signed-off-by: Jiri Kosina 
Signed-off-by: Sasha Levin

HID: cp2112: Use irqchip template

2023-11-20T09:30:12+00:00

[ Upstream commit 6bfa31756ae905e23050ee10a3b4d3d435122c97 ]

This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add(). The irqchip is
instead added while adding the gpiochip.

Cc: Eudean Sun 
Cc: Benjamin Tissoires 
Cc: Sébastien Szymanski 
Signed-off-by: Linus Walleij 
Signed-off-by: Jiri Kosina 
Stable-dep-of: e3c2d2d144c0 ("hid: cp2112: Fix duplicate workqueue initialization")
Signed-off-by: Sasha Levin

HID: multitouch: Add required quirk for Synaptics 0xcd7e device

2023-10-25T09:53:23+00:00

[ Upstream commit 1437e4547edf41689d7135faaca4222ef0081bc1 ]

Register the Synaptics device as a special multitouch device with certain
quirks that may improve usability of the touchpad device.

Reported-by: Rain 
Closes: https://lore.kernel.org/linux-input/2bbb8e1d-1793-4df1-810f-cb0137341ff4@app.fastmail.com/
Signed-off-by: Rahul Rameshbabu 
Signed-off-by: Jiri Kosina 
Signed-off-by: Sasha Levin

HID: holtek: fix slab-out-of-bounds Write in holtek_kbd_input_event

2023-10-25T09:53:23+00:00

[ Upstream commit ffe3b7837a2bb421df84d0177481db9f52c93a71 ]

There is a slab-out-of-bounds Write bug in hid-holtek-kbd driver.
The problem is the driver assumes the device must have an input
but some malicious devices violate this assumption.

Fix this by checking hid_device's input is non-empty before its usage.

Signed-off-by: Ma Ke 
Signed-off-by: Jiri Kosina 
Signed-off-by: Sasha Levin

HID: logitech-hidpp: Fix kernel crash on receiver USB disconnect

2023-10-25T09:53:17+00:00

commit dac501397b9d81e4782232c39f94f4307b137452 upstream.

hidpp_connect_event() has *four* time-of-check vs time-of-use (TOCTOU)
races when it races with itself.

hidpp_connect_event() primarily runs from a workqueue but it also runs
on probe() and if a "device-connected" packet is received by the hw
when the thread running hidpp_connect_event() from probe() is waiting on
the hw, then a second thread running hidpp_connect_event() will be
started from the workqueue.

This opens the following races (note the below code is simplified):

1. Retrieving + printing the protocol (harmless race):

	if (!hidpp->protocol_major) {
		hidpp_root_get_protocol_version()
		hidpp->protocol_major = response.rap.params[0];
	}

We can actually see this race hit in the dmesg in the abrt output
attached to rhbz#2227968:

[ 3064.624215] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected.
[ 3064.658184] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected.

Testing with extra logging added has shown that after this the 2 threads
take turn grabbing the hw access mutex (send_mutex) so they ping-pong
through all the other TOCTOU cases managing to hit all of them:

2. Updating the name to the HIDPP name (harmless race):

	if (hidpp->name == hdev->name) {
		...
		hidpp->name = new_name;
	}

3. Initializing the power_supply class for the battery (problematic!):

hidpp_initialize_battery()
{
        if (hidpp->battery.ps)
                return 0;

	probe_battery(); /* Blocks, threads take turns executing this */

	hidpp->battery.desc.properties =
		devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);

	hidpp->battery.ps =
		devm_power_supply_register(&hidpp->hid_dev->dev,
					   &hidpp->battery.desc, cfg);
}

4. Creating delayed input_device (potentially problematic):

	if (hidpp->delayed_input)
		return;

	hidpp->delayed_input = hidpp_allocate_input(hdev);

The really big problem here is 3. Hitting the race leads to the following
sequence:

	hidpp->battery.desc.properties =
		devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);

	hidpp->battery.ps =
		devm_power_supply_register(&hidpp->hid_dev->dev,
					   &hidpp->battery.desc, cfg);

	...

	hidpp->battery.desc.properties =
		devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);

	hidpp->battery.ps =
		devm_power_supply_register(&hidpp->hid_dev->dev,
					   &hidpp->battery.desc, cfg);

So now we have registered 2 power supplies for the same battery,
which looks a bit weird from userspace's pov but this is not even
the really big problem.

Notice how:

1. This is all devm-maganaged
2. The hidpp->battery.desc struct is shared between the 2 power supplies
3. hidpp->battery.desc.properties points to the result from the second
   devm_kmemdup()

This causes a use after free scenario on USB disconnect of the receiver:
1. The last registered power supply class device gets unregistered
2. The memory from the last devm_kmemdup() call gets freed,
   hidpp->battery.desc.properties now points to freed memory
3. The first registered power supply class device gets unregistered,
   this involves sending a remove uevent to userspace which invokes
   power_supply_uevent() to fill the uevent data
4. power_supply_uevent() uses hidpp->battery.desc.properties which
   now points to freed memory leading to backtraces like this one:

Sep 22 20:01:35 eric kernel: BUG: unable to handle page fault for address: ffffb2140e017f08
...
Sep 22 20:01:35 eric kernel: Workqueue: usb_hub_wq hub_event
Sep 22 20:01:35 eric kernel: RIP: 0010:power_supply_uevent+0xee/0x1d0
...
Sep 22 20:01:35 eric kernel:  ? asm_exc_page_fault+0x26/0x30
Sep 22 20:01:35 eric kernel:  ? power_supply_uevent+0xee/0x1d0
Sep 22 20:01:35 eric kernel:  ? power_supply_uevent+0x10d/0x1d0
Sep 22 20:01:35 eric kernel:  dev_uevent+0x10f/0x2d0
Sep 22 20:01:35 eric kernel:  kobject_uevent_env+0x291/0x680
Sep 22 20:01:35 eric kernel:  power_supply_unregister+0x8e/0xa0
Sep 22 20:01:35 eric kernel:  release_nodes+0x3d/0xb0
Sep 22 20:01:35 eric kernel:  devres_release_group+0xfc/0x130
Sep 22 20:01:35 eric kernel:  hid_device_remove+0x56/0xa0
Sep 22 20:01:35 eric kernel:  device_release_driver_internal+0x19f/0x200
Sep 22 20:01:35 eric kernel:  bus_remove_device+0xc6/0x130
Sep 22 20:01:35 eric kernel:  device_del+0x15c/0x3f0
Sep 22 20:01:35 eric kernel:  ? __queue_work+0x1df/0x440
Sep 22 20:01:35 eric kernel:  hid_destroy_device+0x4b/0x60
Sep 22 20:01:35 eric kernel:  logi_dj_remove+0x9a/0x100 [hid_logitech_dj 5c91534a0ead2b65e04dd799a0437e3b99b21bc4]
Sep 22 20:01:35 eric kernel:  hid_device_remove+0x44/0xa0
Sep 22 20:01:35 eric kernel:  device_release_driver_internal+0x19f/0x200
Sep 22 20:01:35 eric kernel:  bus_remove_device+0xc6/0x130
Sep 22 20:01:35 eric kernel:  device_del+0x15c/0x3f0
Sep 22 20:01:35 eric kernel:  ? __queue_work+0x1df/0x440
Sep 22 20:01:35 eric kernel:  hid_destroy_device+0x4b/0x60
Sep 22 20:01:35 eric kernel:  usbhid_disconnect+0x47/0x60 [usbhid 727dcc1c0b94e6b4418727a468398ac3bca492f3]
Sep 22 20:01:35 eric kernel:  usb_unbind_interface+0x90/0x270
Sep 22 20:01:35 eric kernel:  device_release_driver_internal+0x19f/0x200
Sep 22 20:01:35 eric kernel:  bus_remove_device+0xc6/0x130
Sep 22 20:01:35 eric kernel:  device_del+0x15c/0x3f0
Sep 22 20:01:35 eric kernel:  ? kobject_put+0xa0/0x1d0
Sep 22 20:01:35 eric kernel:  usb_disable_device+0xcd/0x1e0
Sep 22 20:01:35 eric kernel:  usb_disconnect+0xde/0x2c0
Sep 22 20:01:35 eric kernel:  usb_disconnect+0xc3/0x2c0
Sep 22 20:01:35 eric kernel:  hub_event+0xe80/0x1c10

There have been quite a few bug reports (see Link tags) about this crash.

Fix all the TOCTOU issues, including the really bad power-supply related
system crash on USB disconnect, by making probe() use the workqueue for
running hidpp_connect_event() too, so that it can never run more then once.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=2227221
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2227968
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2227968
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2242189
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217412#c58
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede 
Link: https://lore.kernel.org/r/20231005182638.3776-1-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires 
Signed-off-by: Greg Kroah-Hartman

HID: multitouch: Correct devm device reference for hidinput input_dev name

2023-09-23T08:59:52+00:00

[ Upstream commit 4794394635293a3e74591351fff469cea7ad15a2 ]

Reference the HID device rather than the input device for the devm
allocation of the input_dev name. Referencing the input_dev would lead to a
use-after-free when the input_dev was unregistered and subsequently fires a
uevent that depends on the name. At the point of firing the uevent, the
name would be freed by devres management.

Use devm_kasprintf to simplify the logic for allocating memory and
formatting the input_dev name string.

Reported-by: Maxime Ripard 
Closes: https://lore.kernel.org/linux-input/ZOZIZCND+L0P1wJc@penguin/T/#m443f3dce92520f74b6cf6ffa8653f9c92643d4ae
Fixes: c08d46aa805b ("HID: multitouch: devm conversion")
Suggested-by: Maxime Ripard 
Suggested-by: Dmitry Torokhov 
Signed-off-by: Rahul Rameshbabu 
Reviewed-by: Maxime Ripard 
Link: https://lore.kernel.org/r/20230824061308.222021-3-sergeantsagara@protonmail.com
Signed-off-by: Benjamin Tissoires 
Signed-off-by: Sasha Levin

HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()

2023-09-23T08:59:52+00:00

[ Upstream commit 6f20d3261265885f6a6be4cda49d7019728760e0 ]

Presently, if a call to logi_dj_recv_send_report() fails, we do
not learn about the error until after sending short
HID_OUTPUT_REPORT with hid_hw_raw_request().
To handle this somewhat unlikely issue, return on error in
logi_dj_recv_send_report() (minding ugly sleep workaround) and
take into account the result of hid_hw_raw_request().

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 6a9ddc897883 ("HID: logitech-dj: enable notifications on connect/disconnect")
Signed-off-by: Nikita Zhandarovich 
Link: https://lore.kernel.org/r/20230613101635.77820-1-n.zhandarovich@fintech.ru
Signed-off-by: Benjamin Tissoires 
Signed-off-by: Sasha Levin

HID: wacom: remove the battery when the EKR is off

2023-09-23T08:59:37+00:00

commit 9ac6678b95b0dd9458a7a6869f46e51cd55a1d84 upstream.

Currently the EKR battery remains even after we stop getting information
from the device. This can lead to a stale battery persisting indefinitely
in userspace.

The remote sends a heartbeat every 10 seconds. Delete the battery if we
miss two heartbeats (after 21 seconds). Restore the battery once we see
a heartbeat again.

Signed-off-by: Aaron Skomra 
Signed-off-by: Aaron Armstrong Skomra 
Reviewed-by: Jason Gerecke 
Fixes: 9f1015d45f62 ("HID: wacom: EKR: attach the power_supply on first connection")
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina 
Signed-off-by: Greg Kroah-Hartman

HID: add quirk for 03f0:464a HP Elite Presenter Mouse

2023-08-30T14:27:09+00:00

[ Upstream commit 0db117359e47750d8bd310d19f13e1c4ef7fc26a ]

HP Elite Presenter Mouse HID Record Descriptor shows
two mouses (Repord ID 0x1 and 0x2), one keypad (Report ID 0x5),
two Consumer Controls (Report IDs 0x6 and 0x3).
Previous to this commit it registers one mouse, one keypad
and one Consumer Control, and it was usable only as a
digitl laser pointer (one of the two mouses). This patch defines
the 464a USB device ID and enables the HID_QUIRK_MULTI_INPUT
quirk for it, allowing to use the device both as a mouse
and a digital laser pointer.

Signed-off-by: Marco Morandini 
Signed-off-by: Jiri Kosina 
Signed-off-by: Sasha Levin

HID: wacom: Use ktime_t rather than int when dealing with timestamps

2023-07-27T06:37:03+00:00

commit 9a6c0e28e215535b2938c61ded54603b4e5814c5 upstream.

Code which interacts with timestamps needs to use the ktime_t type
returned by functions like ktime_get. The int type does not offer
enough space to store these values, and attempting to use it is a
recipe for problems. In this particular case, overflows would occur
when calculating/storing timestamps leading to incorrect values being
reported to userspace. In some cases these bad timestamps cause input
handling in userspace to appear hung.

Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/901
Fixes: 17d793f3ed53 ("HID: wacom: insert timestamp to packed Bluetooth (BT) events")
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke 
Reviewed-by: Benjamin Tissoires 
Link: https://lore.kernel.org/r/20230608213828.2108-1-jason.gerecke@wacom.com
Signed-off-by: Benjamin Tissoires 
Signed-off-by: Greg Kroah-Hartman