linux-stable.git/drivers/hid, branch linux-4.1.y

HID: hidraw: Fix crash on HIDIOCGFEATURE with a destroyed device

2018-05-23T01:36:35+00:00

[ Upstream commit a955358d54695e4ad9f7d6489a7ac4d69a8fc711 ]

Doing `ioctl(HIDIOCGFEATURE)` in a tight loop on a hidraw device
and then disconnecting the device, or unloading the driver, can
cause a NULL pointer dereference.

When a hidraw device is destroyed it sets 0 to `dev->exist`.
Most functions check 'dev->exist' before doing its work, but
`hidraw_get_report()` was missing that check.

Cc: stable@vger.kernel.org
Signed-off-by: Rodrigo Rivas Costa 
Signed-off-by: Jiri Kosina 
Signed-off-by: Sasha Levin

HID: core: Fix size as type u32

2018-05-23T01:36:33+00:00

[ Upstream commit 6de0b13cc0b4ba10e98a9263d7a83b940720b77a ]

When size is negative, calling memset will make segment fault.
Declare the size as type u32 to keep memset safe.

size in struct hid_report is unsigned, fix return type of
hid_report_len to u32.

Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma 
Signed-off-by: Jiri Kosina 
Signed-off-by: Sasha Levin

HID: i2c-hid: fix size check and type usage

2018-05-23T01:36:33+00:00

[ Upstream commit ac75a041048b8c1f7418e27621ca5efda8571043 ]

When convert char array with signed int, if the inbuf[x] is negative then
upper bits will be set to 1. Fix this by using u8 instead of char.

ret_size has to be at least 3, hid_input_report use it after minus 2 bytes.

Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma 
Signed-off-by: Jiri Kosina 
Signed-off-by: Sasha Levin

HID: elo: clear BTN_LEFT mapping

2018-05-23T01:33:46+00:00

[ Upstream commit 9abd04af951e5734c9d5cfee9b49790844b734cf ]

ELO devices have one Button usage in GenDesk field, which makes hid-input map
it to BTN_LEFT; that confuses userspace, which then considers the device to be
a mouse/touchpad instead of touchscreen.

Fix that by unmapping BTN_LEFT and keeping only BTN_TOUCH in place.

Signed-off-by: Jiri Kosina 
Signed-off-by: Sasha Levin

HID: clamp input to logical range if no null state

2018-05-23T01:33:43+00:00

[ Upstream commit c3883fe06488a483658ba5d849b70e49bee15e7c ]

This patch fixes an issue in drivers/hid/hid-input.c where values
outside of the logical range are not clamped when "null state" bit of
the input control is not set.

This was discussed on the lists [1] and this change stems from the fact
due to the ambiguity of the HID specification it might be appropriate to
follow Microsoft's own interpretation of the specification. As noted in
Microsoft's documentation [2] in the section titled "Required HID usages
for digitizers" it is noted that values reported outside the logical
range "will be considered as invalid data and the value will be changed
to the nearest boundary value (logical min/max)."

This patch fixes an issue where the (1292:4745) Innomedia INNEX
GENESIS/ATARI reports out of range values for its X and Y axis of the
DPad which, due to the null state bit being unset, are forwarded to
userspace as is. Now these values will get clamped to the logical range
before being forwarded to userspace. This device was also used to test
this patch.

This patch expands on commit 3f3752705dbd ("HID: reject input outside
logical range only if null state is set").

[1]: http://lkml.kernel.org/r/20170307131036.GA853@gaia.local
[2]: https://msdn.microsoft.com/en-us/library/windows/hardware/dn672278(v=vs.85).asp

Signed-off-by: Tomasz Kramkowski 
Acked-by: Benjamin Tissoires 
Signed-off-by: Jiri Kosina 
Signed-off-by: Sasha Levin

HID: reject input outside logical range only if null state is set

2018-05-23T01:33:43+00:00

[ Upstream commit 3f3752705dbd50b66b66ad7b4d54fe33d2f746ed ]

This patch fixes an issue in drivers/hid/hid-input.c where USB HID
control null state flag is not checked upon rejecting inputs outside
logical minimum-maximum range. The check should be made according to USB
HID specification 1.11, section 6.2.2.5, p.31. The fix will resolve
issues with some game controllers, such as:
https://bugzilla.kernel.org/show_bug.cgi?id=68621

[tk@the-tk.com: shortened and fixed spelling in commit message]
Signed-off-by: Valtteri Heikkilä 
Signed-off-by: Tomasz Kramkowski 
Acked-By: Benjamin Tissoires 
Signed-off-by: Jiri Kosina 
Signed-off-by: Sasha Levin

usb: ldusb: add PIDs for new CASSY devices supported by this driver

2018-03-04T15:28:34+00:00

[ Upstream commit 52ad2bd8918158266fc88a05f95429b56b6a33c5 ]

This patch adds support for new CASSY devices to the ldusb driver. The
PIDs are also added to the ignore list in hid-quirks.

Signed-off-by: Karsten Koop 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

HID: xinmo: fix for out of range for THT 2P arcade controller.

2018-03-01T00:32:14+00:00

[ Upstream commit 9257821c5a1dc57ef3a37f7cbcebaf548395c964 ]

There is a new clone of the XIN MO arcade controller which has same issue with
out of range like the original.  This fix will solve the issue where 2
directions on the joystick are not recognized by the new THT 2P arcade
controller with device ID 0x75e1.  In details the new device ID is added the
hid-id list and the hid-xinmo source code.

Signed-off-by: Peter Stein 
Signed-off-by: Jiri Kosina 
Signed-off-by: Sasha Levin

HID: usbhid: fix out-of-bounds bug

2017-11-06T04:54:24+00:00

[ Upstream commit f043bfc98c193c284e2cd768fefabe18ac2fed9b ]

The hid descriptor identifies the length and type of subordinate
descriptors for a device. If the received hid descriptor is smaller than
the size of the struct hid_descriptor, it is possible to cause
out-of-bounds.

In addition, if bNumDescriptors of the hid descriptor have an incorrect
value, this can also cause out-of-bounds while approaching hdesc->desc[n].

So check the size of hid descriptor and bNumDescriptors.

	BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20
	Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261

	CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted
	4.14.0-rc1-42251-gebb2c2437d80 #169
	Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
	Workqueue: usb_hub_wq hub_event
	Call Trace:
	__dump_stack lib/dump_stack.c:16
	dump_stack+0x292/0x395 lib/dump_stack.c:52
	print_address_description+0x78/0x280 mm/kasan/report.c:252
	kasan_report_error mm/kasan/report.c:351
	kasan_report+0x22f/0x340 mm/kasan/report.c:409
	__asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427
	usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004
	hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944
	usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369
	usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
	really_probe drivers/base/dd.c:413
	driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
	__device_attach_driver+0x230/0x290 drivers/base/dd.c:653
	bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
	__device_attach+0x26e/0x3d0 drivers/base/dd.c:710
	device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
	bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
	device_add+0xd0b/0x1660 drivers/base/core.c:1835
	usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932
	generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174
	usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266
	really_probe drivers/base/dd.c:413
	driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
	__device_attach_driver+0x230/0x290 drivers/base/dd.c:653
	bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
	__device_attach+0x26e/0x3d0 drivers/base/dd.c:710
	device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
	bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
	device_add+0xd0b/0x1660 drivers/base/core.c:1835
	usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457
	hub_port_connect drivers/usb/core/hub.c:4903
	hub_port_connect_change drivers/usb/core/hub.c:5009
	port_event drivers/usb/core/hub.c:5115
	hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195
	process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119
	worker_thread+0x221/0x1850 kernel/workqueue.c:2253
	kthread+0x3a1/0x470 kernel/kthread.c:231
	ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431

Cc: stable@vger.kernel.org
Reported-by: Andrey Konovalov 
Signed-off-by: Jaejoong Kim 
Tested-by: Andrey Konovalov 
Acked-by: Alan Stern 
Signed-off-by: Jiri Kosina 
Signed-off-by: Sasha Levin

HID: i2c-hid: allocate hid buffers for real worst case

2017-11-06T04:54:21+00:00

[ Upstream commit 8320caeeffdefec3b58b9d4a7ed8e1079492fe7b ]

The buffer allocation is not currently accounting for an extra byte for
the report id. This can cause an out of bounds access in function
i2c_hid_set_or_send_report() with reportID > 15.

Cc: stable@vger.kernel.org
Signed-off-by: Adrian Salido 
Reviewed-by: Benson Leung 
Signed-off-by: Guenter Roeck 
Signed-off-by: Dmitry Torokhov 
Signed-off-by: Jiri Kosina 
Signed-off-by: Sasha Levin