linux-stable.git/drivers/hid/hid-core.c, branch linux-3.9.y

HID: reintroduce fix-up for certain Sony RF receivers

2013-05-19T18:38:10+00:00

commit c1e0ac192b48b37f31801c17534ab3d2a9282d84 upstream.

It looks like the manual merge 0d69a3c731e120b05b7da9fb976830475a3fbc01 ("Merge
branches 'for-3.9/sony' and 'for-3.9/steelseries' into for-linus") accidentally
removed Sony RF receiver with USB product id 0x0374 from the "have special
driver" list, effectively nullifying a464918419f94a0043d2f549d6defb4c3f69f68a
("HID: add support for Sony RF receiver with USB product id 0x0374"). Add the
device back to the list.

Signed-off-by: Fernando Luis Vazquez Cao 
Signed-off-by: Jiri Kosina 
Signed-off-by: Greg Kroah-Hartman

HID: fix Masterkit MA901 hid quirks

2013-03-29T14:13:39+00:00

This patch reverts commit 0322bd3980 ("usb hid quirks for Masterkit MA901 usb
radio") and adds checks in hid_ignore() for Masterkit MA901 usb radio device.
This usb radio device shares USB ID with many Atmel V-USB (and probably other)
devices so patch sorts things out by checking name, vendor, product of hid device.

Signed-off-by: Alexey Klimov 
Acked-by: Mauro Carvalho Chehab 
Signed-off-by: Jiri Kosina

Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2013-02-25T01:35:10+00:00

Pull media updates from Mauro Carvalho Chehab:

 - Some cleanups at V4L2 documentation

 - new drivers: ts2020 frontend, ov9650 sensor, s5c73m3 sensor,
   sh-mobile veu mem2mem driver, radio-ma901, davinci_vpfe staging
   driver

 - Lots of missing MAINTAINERS entries added

 - several em28xx driver improvements, including its conversion to
   videobuf2

 - several fixups on drivers to make them to better comply with the API

 - DVB core: add support for DVBv5 stats, allowing the implementation of
   statistics for new standards like ISDB

 - mb86a20s: add statistics to the driver

 - lots of new board additions, cleanups, and driver improvements.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (596 commits)
  [media] media: Add 0x3009 USB PID to ttusb2 driver (fixed diff)
  [media] rtl28xxu: Add USB IDs for Compro VideoMate U620F
  [media] em28xx: add usb id for terratec h5 rev. 3
  [media] media: rc: gpio-ir-recv: add support for device tree parsing
  [media] mceusb: move check earlier to make smatch happy
  [media] radio-si470x doc: add info about v4l2-ctl and sox+alsa
  [media] staging: media: Remove unnecessary OOM messages
  [media] sh_vou: Use vou_dev instead of vou_file wherever possible
  [media] sh_vou: Use video_drvdata()
  [media] drivers/media/platform/soc_camera/pxa_camera.c: use devm_ functions
  [media] mt9t112: mt9t111 format set up differs from mt9t112
  [media] sh-mobile-ceu-camera: fix SHARPNESS control default
  Revert "[media] fc0011: Return early, if the frequency is already tuned"
  [media] cx18/ivtv: fix regression: remove __init from a non-init function
  [media] em28xx: fix analog streaming with USB bulk transfers
  [media] stv0900: remove unnecessary null pointer check
  [media] fc0011: Return early, if the frequency is already tuned
  [media] fc0011: Add some sanity checks and cleanups
  [media] fc0011: Fix xin value clamping
  Revert "[media] [PATH,1/2] mxl5007 move reset to attach"
  ...

Merge branches 'for-3.9/sony' and 'for-3.9/steelseries' into for-linus

2013-02-21T09:45:52+00:00

Conflicts:
	drivers/hid/hid-core.c

Merge branches 'for-3.9/logitech', 'for-3.9/multitouch', 'for-3.9/ntrig', 'for-3.9/thingm' and 'for-3.9/upstream' into for-linus

2013-02-21T09:45:01+00:00

HID: add ThingM blink(1) USB RGB LED support

2013-02-19T10:31:46+00:00

The ThingM blink(1) is an open source hardware USB RGB LED. It contains
an internal EEPROM, allowing to configure up to 12 light patterns. A
light pattern is a RGB color plus a fade time. This driver registers a
LED class instance with additional sysfs attributes to support basic
functions such as setting RGB colors, fade and playing. Other functions
are still accessible through the hidraw interface.

At this time, the only documentation for the device is the firmware
source code from ThingM, plus a few schematics. They are available at:

https://github.com/todbot/blink1

This patch is version 3. It updates the name of the source file, the
driver and the led sysfs entry, according to comments from Jiri Kosina
and Simon Wood.

Signed-off-by: Vivien Didelot 
Signed-off-by: Jiri Kosina

HID: blacklist Velleman data acquisition boards

2013-02-18T09:35:46+00:00

These are simple data acquistion boards, not HID devices and are handled
by the vmk80xx comedi driver.  At least one of them (10cf:5500)
misidentifies itself as a HID in its USB interface descriptor.  Ignore
all these devices.

Signed-off-by: Ian Abbott 
Signed-off-by: Jiri Kosina

HID: extend autodetect to handle I2C sensors as well

2013-02-18T09:23:48+00:00

Since the advent of HID over I2C protocol, it is possible to have sensor
hubs behind I2C bus as well. We can autodetect this in a same way than USB
sensor hubs.

Signed-off-by: Mika Westerberg 
Reviewed-by: Benjamin Tissoires 
Signed-off-by: Jiri Kosina

HID: core: add "report" hook, called once the report has been parsed

2013-02-05T11:07:39+00:00

This callback is called when the parsing of the report has been done
by hid-core (so after the calls to .event). The hid drivers can now
have access to the whole report by relying on the values stored in
the different fields.

Signed-off-by: Benjamin Tissoires 
Signed-off-by: Jiri Kosina

USB: HID: SRW-S1 Gaming Wheel Driver

2013-01-31T15:39:30+00:00

Add support the SRW-S1 by patching HID descriptor to read axis
as Generic Desktop X, Y and Z (rather than Usage page being
'Simulation').

Signed-off-by: Simon Wood 
Tested-by: John Murphy 
Signed-off-by: Jiri Kosina