linux-stable.git/drivers/gpu, branch v6.1.55 Linux kernel stable tree drm/amdgpu: fix amdgpu_cs_p1_user_fence 2023-09-23T09:11:12+00:00 Christian König christian.koenig@amd.com 2023-08-25T13:28:00+00:00 4c6bb91581796d34466d85bc06c9393d27f83101 commit 35588314e963938dfdcdb792c9170108399377d6 upstream. The offset is just 32bits here so this can potentially overflow if somebody specifies a large value. Instead reduce the size to calculate the last possible offset. The error handling path incorrectly drops the reference to the user fence BO resulting in potential reference count underflow. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 35588314e963938dfdcdb792c9170108399377d6 upstream.

The offset is just 32bits here so this can potentially overflow if
somebody specifies a large value. Instead reduce the size to calculate
the last possible offset.

The error handling path incorrectly drops the reference to the user
fence BO resulting in potential reference count underflow.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/amd/display: fix the white screen issue when >= 64GB DRAM 2023-09-23T09:11:12+00:00 Yifan Zhang yifan1.zhang@amd.com 2023-09-08T08:46:39+00:00 4422080e777e3fa740e2920fe4de53cfad7fcef2 commit ef064187a9709393a981a56cce1e31880fd97107 upstream. Dropping bit 31:4 of page table base is wrong, it makes page table base points to wrong address if phys addr is beyond 64GB; dropping page_table_start/end bit 31:4 is unnecessary since dcn20_vmid_setup will do that. Also, while we are at it, cleanup the assignments using upper_32_bits()/lower_32_bits() and AMDGPU_GPU_PAGE_SHIFT. Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354 Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)") Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Co-developed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ef064187a9709393a981a56cce1e31880fd97107 upstream.

Dropping bit 31:4 of page table base is wrong, it makes page table
base points to wrong address if phys addr is beyond 64GB; dropping
page_table_start/end bit 31:4 is unnecessary since dcn20_vmid_setup
will do that. Also, while we are at it, cleanup the assignments using
upper_32_bits()/lower_32_bits() and AMDGPU_GPU_PAGE_SHIFT.

Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)")
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Co-developed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "drm/amd: Disable S/G for APUs when 64GB or more host memory" 2023-09-23T09:11:10+00:00 Hamza Mahfooz hamza.mahfooz@amd.com 2023-09-08T14:36:44+00:00 216eae7d7dea5fdd854d7decb44fcf3b719548a0 commit 169ed4ece8373f02f10642eae5240e3d1ef5c038 upstream. This reverts commit 70e64c4d522b732e31c6475a3be2349de337d321. Since, we now have an actual fix for this issue, we can get rid of this workaround as it can cause pin failures if enough VRAM isn't carved out by the BIOS. Cc: stable@vger.kernel.org # 6.1+ Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 169ed4ece8373f02f10642eae5240e3d1ef5c038 upstream.

This reverts commit 70e64c4d522b732e31c6475a3be2349de337d321.

Since, we now have an actual fix for this issue, we can get rid of this
workaround as it can cause pin failures if enough VRAM isn't carved out
by the BIOS.

Cc: stable@vger.kernel.org # 6.1+
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm: gm12u320: Fix the timeout usage for usb_bulk_msg() 2023-09-23T09:11:08+00:00 Jinjie Ruan ruanjinjie@huawei.com 2023-09-04T02:14:20+00:00 cbf226355ee3abb98ff266c3ed8ddacae7bfcfa6 [ Upstream commit 7583028d359db3cd0072badcc576b4f9455fd27a ] The timeout arg of usb_bulk_msg() is ms already, which has been converted to jiffies by msecs_to_jiffies() in usb_start_wait_urb(). So fix the usage by removing the redundant msecs_to_jiffies() in the macros. And as Hans suggested, also remove msecs_to_jiffies() for the IDLE_TIMEOUT macro to make it consistent here and so change IDLE_TIMEOUT to msecs_to_jiffies(IDLE_TIMEOUT) where it is used. Fixes: e4f86e437164 ("drm: Add Grain Media GM12U320 driver v2") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Suggested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230904021421.1663892-1-ruanjinjie@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7583028d359db3cd0072badcc576b4f9455fd27a ]

The timeout arg of usb_bulk_msg() is ms already, which has been converted
to jiffies by msecs_to_jiffies() in usb_start_wait_urb(). So fix the usage
by removing the redundant msecs_to_jiffies() in the macros.

And as Hans suggested, also remove msecs_to_jiffies() for the IDLE_TIMEOUT
macro to make it consistent here and so change IDLE_TIMEOUT to
msecs_to_jiffies(IDLE_TIMEOUT) where it is used.

Fixes: e4f86e437164 ("drm: Add Grain Media GM12U320 driver v2")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230904021421.1663892-1-ruanjinjie@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/mediatek: dp: Change logging to dev for mtk_dp_aux_transfer() 2023-09-23T09:11:04+00:00 AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com 2023-07-25T07:32:26+00:00 4c743c1dd2ee2a72951660b6798d4d7f7674f87b [ Upstream commit fd70e2019bfbcb0ed90c5e23839bf510ce6acf8f ] Change logging from drm_{err,info}() to dev_{err,info}() in functions mtk_dp_aux_transfer() and mtk_dp_aux_do_transfer(): this will be essential to avoid getting NULL pointer kernel panics if any kind of error happens during AUX transfers happening before the bridge is attached. This may potentially start happening in a later commit implementing aux-bus support, as AUX transfers will be triggered from the panel driver (for EDID) before the mtk-dp bridge gets attached, and it's done in preparation for the same. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: CK Hu <ck.hu@mediatek.com> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> Link: https://patchwork.kernel.org/project/dri-devel/patch/20230725073234.55892-4-angelogioacchino.delregno@collabora.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fd70e2019bfbcb0ed90c5e23839bf510ce6acf8f ]

Change logging from drm_{err,info}() to dev_{err,info}() in functions
mtk_dp_aux_transfer() and mtk_dp_aux_do_transfer(): this will be
essential to avoid getting NULL pointer kernel panics if any kind
of error happens during AUX transfers happening before the bridge
is attached.

This may potentially start happening in a later commit implementing
aux-bus support, as AUX transfers will be triggered from the panel
driver (for EDID) before the mtk-dp bridge gets attached, and it's
done in preparation for the same.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230725073234.55892-4-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/exynos: fix a possible null-pointer dereference due to data race in exynos_drm_crtc_atomic_disable() 2023-09-23T09:11:04+00:00 Tuo Li islituo@gmail.com 2023-06-30T02:19:06+00:00 edddbdb8122e82a2427c1b9c9df4497f3aacc0bc [ Upstream commit 2e63972a2de14482d0eae1a03a73e379f1c3f44c ] The variable crtc->state->event is often protected by the lock crtc->dev->event_lock when is accessed. However, it is accessed as a condition of an if statement in exynos_drm_crtc_atomic_disable() without holding the lock: if (crtc->state->event && !crtc->state->active) However, if crtc->state->event is changed to NULL by another thread right after the conditions of the if statement is checked to be true, a null-pointer dereference can occur in drm_crtc_send_vblank_event(): e->pipe = pipe; To fix this possible null-pointer dereference caused by data race, the spin lock coverage is extended to protect the if statement as well as the function call to drm_crtc_send_vblank_event(). Reported-by: BassCheck <bass@buaa.edu.cn> Link: https://sites.google.com/view/basscheck/home Signed-off-by: Tuo Li <islituo@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Added relevant link. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2e63972a2de14482d0eae1a03a73e379f1c3f44c ]

The variable crtc->state->event is often protected by the lock
crtc->dev->event_lock when is accessed. However, it is accessed as a
condition of an if statement in exynos_drm_crtc_atomic_disable() without
holding the lock:

  if (crtc->state->event && !crtc->state->active)

However, if crtc->state->event is changed to NULL by another thread right
after the conditions of the if statement is checked to be true, a
null-pointer dereference can occur in drm_crtc_send_vblank_event():

  e->pipe = pipe;

To fix this possible null-pointer dereference caused by data race, the
spin lock coverage is extended to protect the if statement as well as the
function call to drm_crtc_send_vblank_event().

Reported-by: BassCheck <bass@buaa.edu.cn>
Link: https://sites.google.com/view/basscheck/home
Signed-off-by: Tuo Li <islituo@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Added relevant link.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/amd/display: Blocking invalid 420 modes on HDMI TMDS for DCN314 2023-09-23T09:11:04+00:00 Leo Chen sancchen@amd.com 2023-07-27T02:44:13+00:00 a101b1bdd24acf648a55b86d8b429b76e1bd202b [ Upstream commit 4c6107a653ccf361cb1b6ba35d558a1a5e6e57ac ] [Why & How] HDMI TMDS does not have ODM support. Filtering 420 modes that exceed the 4096 FMT limitation on DCN314 will resolve intermittent corruptions issues. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4c6107a653ccf361cb1b6ba35d558a1a5e6e57ac ]

[Why & How]
HDMI TMDS does not have ODM support. Filtering 420 modes that
exceed the 4096 FMT limitation on DCN314 will resolve
intermittent corruptions issues.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/amd/display: Blocking invalid 420 modes on HDMI TMDS for DCN31 2023-09-23T09:11:04+00:00 Leo Chen sancchen@amd.com 2023-07-24T20:57:36+00:00 2c0f5b6972ebfd6224065fd3c59d04f85a8af795 [ Upstream commit 026a71babf48efb6b9884a3a66fa31aec9e1ea54 ] [Why & How] HDMI TMDS does not have ODM support. Filtering 420 modes that exceed the 4096 FMT limitation on DCN31 will resolve intermittent corruptions issues. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 026a71babf48efb6b9884a3a66fa31aec9e1ea54 ]

[Why & How]
HDMI TMDS does not have ODM support. Filtering 420 modes that
exceed the 4096 FMT limitation on DCN31 will resolve
intermittent corruptions issues.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/amd/display: Use DTBCLK as refclk instead of DPREFCLK 2023-09-23T09:11:04+00:00 Austin Zheng austin.zheng@amd.com 2023-07-26T14:40:48+00:00 506d2ee72af2ffc4173537eb001d7d4d57781ec7 [ Upstream commit 4a30cc2bd281fa176a68b5305cd3695d636152ad ] [Why] Flash of corruption observed when UCLK switching after transitioning from DTBCLK to DPREFCLK on subVP(DP) + subVP(HDMI) config Scenario where DPREFCLK is required instead of DTBCLK is not expected [How] Always set the DTBCLK source as DTBCLK0 Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Austin Zheng <austin.zheng@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 4a30cc2bd281fa176a68b5305cd3695d636152ad ]

[Why]
Flash of corruption observed when UCLK switching after transitioning
from DTBCLK to DPREFCLK on subVP(DP) + subVP(HDMI) config
Scenario where DPREFCLK is required instead of DTBCLK is not expected

[How]
Always set the DTBCLK source as DTBCLK0

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/amd/display: Fix underflow issue on 175hz timing 2023-09-23T09:11:04+00:00 Leo Ma hanghong.ma@amd.com 2023-07-06T20:17:03+00:00 2ec715bf881696b23caa06953c8c9309c2ce5224 [ Upstream commit 735688eb905db529efea0c78466fccc1461c3fde ] [Why] Screen underflows happen on 175hz timing for 3 plane overlay case. [How] Based on dst y prefetch value clamp to equ or oto for bandwidth calculation. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Leo Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 735688eb905db529efea0c78466fccc1461c3fde ]

[Why]
Screen underflows happen on 175hz timing for 3 plane overlay case.

[How]
Based on dst y prefetch value clamp to equ or oto for bandwidth
calculation.

Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>