linux-stable.git/drivers/gpu, branch v5.4.49

Revert "drm/amd/display: disable dcn20 abm feature for bring up"

2020-06-24T15:50:51+00:00

commit 14ed1c908a7a623cc0cbf0203f8201d1b7d31d16 upstream.

This reverts commit 96cb7cf13d8530099c256c053648ad576588c387.

This change was used for DCN2 bringup and is no longer desired.
In fact it breaks backlight on DCN2 systems.

Cc: Alexander Monakov 
Cc: Hersen Wu 
Cc: Anthony Koo 
Cc: Michael Chiu 
Signed-off-by: Harry Wentland 
Acked-by: Alex Deucher 
Reviewed-by: Nicholas Kazlauskas 
Reported-and-tested-by: Alexander Monakov 
Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

drm/i915/icl+: Fix hotplug interrupt disabling after storm detection

2020-06-24T15:50:51+00:00

commit a3005c2edf7e8c3478880db1ca84028a2b6819bb upstream.

Atm, hotplug interrupts on TypeC ports are left enabled after detecting
an interrupt storm, fix this.

Reported-by: Kunal Joshi 
References: https://gitlab.freedesktop.org/drm/intel/-/issues/351
Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/1964
Cc: Kunal Joshi 
Cc: stable@vger.kernel.org
Signed-off-by: Imre Deak 
Reviewed-by: Ville Syrjälä 
Link: https://patchwork.freedesktop.org/patch/msgid/20200612121731.19596-1-imre.deak@intel.com
(cherry picked from commit 587a87b9d7e94927edcdea018565bc1939381eb1)
Signed-off-by: Joonas Lahtinen 
Signed-off-by: Greg Kroah-Hartman

drm/amd/display: Use kvfree() to free coeff in build_regamma()

2020-06-24T15:50:51+00:00

commit 81921a828b94ce2816932c19a5ec74d302972833 upstream.

Use kvfree() instead of kfree() to free coeff in build_regamma()
because the memory is allocated with kvzalloc().

Fixes: e752058b8671 ("drm/amd/display: Optimize gamma calculations")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Efremov 
Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

drm/connector: notify userspace on hotplug after register complete

2020-06-24T15:50:50+00:00

commit 968d81a64a883af2d16dd3f8a6ad6b67db2fde58 upstream.

drm connector notifies userspace on hotplug event prematurely before
late_register and mode_object register completes. This leads to a race
between userspace and kernel on updating the IDR list. So, move the
notification to end of connector register.

Signed-off-by: Jeykumar Sankaran 
Signed-off-by: Steve Cohen 
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter 
Link: https://patchwork.freedesktop.org/patch/msgid/1591155451-10393-1-git-send-email-jsanka@codeaurora.org
Signed-off-by: Greg Kroah-Hartman

drm/i915: Whitelist context-local timestamp in the gen9 cmdparser

2020-06-24T15:50:50+00:00

commit 273500ae71711c040d258a7b3f4b6f44c368fff2 upstream.

Allow batch buffers to read their own _local_ cumulative HW runtime of
their logical context.

Fixes: 0f2f39758341 ("drm/i915: Add gen9 BCS cmdparsing")
Signed-off-by: Chris Wilson 
Cc: Mika Kuoppala 
Cc:  # v5.4+
Reviewed-by: Mika Kuoppala 
Link: https://patchwork.freedesktop.org/patch/msgid/20200601161942.30854-1-chris@chris-wilson.co.uk
(cherry picked from commit f9496520df11de00fbafc3cbd693b9570d600ab3)
Signed-off-by: Joonas Lahtinen 
Signed-off-by: Greg Kroah-Hartman

drm/i915/gem: Avoid iterating an empty list

2020-06-24T15:50:50+00:00

commit 757a9395f33c51c4e6eff2c7c0fbd50226a58224 upstream.

Our __sgt_iter assumes that the scattergather list has at least one
element. But during construction we may fail in allocating the first
page, and so mark the first element as the terminator. This is
unexpected!

[22555.524752] RIP: 0010:shmem_get_pages+0x506/0x710 [i915]
[22555.524759] Code: 49 8b 2c 24 31 c0 66 89 44 24 40 48 85 ed 0f 84 62 01 00 00 4c 8b 75 00 8b 5d 08 44 8b 7d 0c 48 8b 0d 7e 34 07 e2 49 83 e6 fc <49> 8b 16 41 01 df 48 89 cf 48 89 d0 48 c1 e8 2d 48 85 c9 0f 84 c8
[22555.524765] RSP: 0018:ffffc9000053f9d0 EFLAGS: 00010246
[22555.524770] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8881ffffa000
[22555.524774] RDX: fffffffffffffff4 RSI: ffffffffffffffff RDI: ffffffff821efe00
[22555.524778] RBP: ffff8881b099ab00 R08: 0000000000000000 R09: 00000000fffffff4
[22555.524782] R10: 0000000000000002 R11: 00000000ffec0a02 R12: ffff8881cd3c8d60
[22555.524786] R13: 00000000fffffff4 R14: 0000000000000000 R15: 0000000000000000
[22555.524790] FS:  00007f4fbeb9b9c0(0000) GS:ffff8881f8580000(0000) knlGS:0000000000000000
[22555.524795] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[22555.524799] CR2: 0000000000000000 CR3: 00000001ec7f0004 CR4: 00000000001606e0
[22555.524803] Call Trace:
[22555.524919]  __i915_gem_object_get_pages+0x4f/0x60 [i915]

Fixes: 85d1225ec066 ("drm/i915: Introduce & use new lightweight SGL iterators")
Signed-off-by: Chris Wilson 
Cc: Matthew Auld 
Cc: Tvrtko Ursulin 
Cc:  # v4.8+
Reviewed-by: Matthew Auld 
Reviewed-by: Maciej Patelczyk 
Link: https://patchwork.freedesktop.org/patch/msgid/20200522132706.5133-1-chris@chris-wilson.co.uk
(cherry picked from commit 957ad9a02be6faa87594c58ac09460cd3d190d0e)
Signed-off-by: Joonas Lahtinen 
Signed-off-by: Greg Kroah-Hartman

drm/msm: Check for powered down HW in the devfreq callbacks

2020-06-24T15:50:50+00:00

commit eadf79286a4badebc95af7061530bdb50a7e6f38 upstream.

Writing to the devfreq sysfs nodes while the GPU is powered down can
result in a system crash (on a5xx) or a nasty GMU error (on a6xx):

 $ /sys/class/devfreq/5000000.gpu# echo 500000000 > min_freq
  [  104.841625] platform 506a000.gmu: [drm:a6xx_gmu_set_oob]
	*ERROR* Timeout waiting for GMU OOB set GPU_DCVS: 0x0

Despite the fact that we carefully try to suspend the devfreq device when
the hardware is powered down there are lots of holes in the governors that
don't check for the suspend state and blindly call into the devfreq
callbacks that end up triggering hardware reads in the GPU driver.

Call pm_runtime_get_if_in_use() in the gpu_busy() and gpu_set_freq()
callbacks to skip the hardware access if it isn't active.

v3: Only check pm_runtime_get_if_in_use() for == 0 per Eric Anholt
v2: Use pm_runtime_get_if_in_use() per Eric Anholt

Cc: stable@vger.kernel.org
Reviewed-by: Eric Anholt 
Signed-off-by: Jordan Crouse 
Signed-off-by: Rob Clark 
Signed-off-by: Greg Kroah-Hartman

drm/i915: Fix AUX power domain toggling across TypeC mode resets

2020-06-24T15:50:50+00:00

commit d96536f0fe699729a0974eb5b65eb0d87cc747e1 upstream.

Make sure to select the port's AUX power domain while holding the TC
port lock. The domain depends on the port's current TC mode, which may
get changed under us if we're not holding the lock.

This was left out from
commit 8c10e2262663 ("drm/i915: Keep the TypeC port mode fixed for detect/AUX transfers")

Cc:  # v5.4+
Signed-off-by: Imre Deak 
Reviewed-by: José Roberto de Souza 
Link: https://patchwork.freedesktop.org/patch/msgid/20200514204553.27193-1-imre.deak@intel.com
(cherry picked from commit ae9b6cfe1352da25931bce3ea4acfd4dc1ac8a85)
Signed-off-by: Joonas Lahtinen 
Signed-off-by: Greg Kroah-Hartman

drm/amd/display: Use swap() where appropriate

2020-06-24T15:50:49+00:00

[ Upstream commit 34b86b75dfc90ab3d996c224314ce51772a3b351 ]

Mostly a cocci-job, but it flat out refused to remove the
declaration in drivers/gpu/drm/amd/display/dc/core/dc.c so
had to do that part manually.

@swap@
identifier TEMP;
expression A,B;
@@
- TEMP = A;
- A = B;
- B = TEMP;
+ swap(A, B);

@@
type T;
identifier swap.TEMP;
@@
(
- T TEMP;
|
- T TEMP = {...};
)
... when != TEMP

Cc: Harry Wentland 
Cc: Leo Li 
Cc: Alex Deucher 
Cc: "Christian König" 
Cc: "David (ChunMing) Zhou" 
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Nicholas Kazlauskas 
Signed-off-by: Ville Syrjälä 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

drm/dp_mst: Increase ACT retry timeout to 3s

2020-06-24T15:50:49+00:00

[ Upstream commit 873a95e0d59ac06901ae261dda0b7165ffd002b8 ]

Currently we only poll for an ACT up to 30 times, with a busy-wait delay
of 100µs between each attempt - giving us a timeout of 2900µs. While
this might seem sensible, it would appear that in certain scenarios it
can take dramatically longer then that for us to receive an ACT. On one
of the EVGA MST hubs that I have available, I observed said hub
sometimes taking longer then a second before signalling the ACT. These
delays mostly seem to occur when previous sideband messages we've sent
are NAKd by the hub, however it wouldn't be particularly surprising if
it's possible to reproduce times like this simply by introducing branch
devices with large LCTs since payload allocations have to take effect on
every downstream device up to the payload's target.

So, instead of just retrying 30 times we poll for the ACT for up to 3ms,
and additionally use usleep_range() to avoid a very long and rude
busy-wait. Note that the previous retry count of 30 appears to have been
arbitrarily chosen, as I can't find any mention of a recommended timeout
or retry count for ACTs in the DisplayPort 2.0 specification. This also
goes for the range we were previously using for udelay(), although I
suspect that was just copied from the recommended delay for link
training on SST devices.

Changes since v1:
* Use readx_poll_timeout() instead of open-coding timeout loop - Sean
  Paul
Changes since v2:
* Increase poll interval to 200us - Sean Paul
* Print status in hex when we timeout waiting for ACT - Sean Paul

Signed-off-by: Lyude Paul 
Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: Sean Paul 
Cc:  # v3.17+
Reviewed-by: Sean Paul 
Link: https://patchwork.freedesktop.org/patch/msgid/20200406221253.1307209-4-lyude@redhat.com
Signed-off-by: Sasha Levin