linux-stable.git/drivers/gpu, branch v5.4.293

drm/amd/pm: Prevent division by zero

2025-05-02T05:39:25+00:00

[ Upstream commit 4e3d9508c056d7e0a56b58d5c81253e2a0d22b6c ]

The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 031db09017da ("drm/amd/powerplay/vega20: enable fan RPM and pwm settings V2")
Signed-off-by: Denis Arefev 
Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin

drm/sti: remove duplicate object names

2025-05-02T05:39:21+00:00

commit 7fb6afa9125fc111478615e24231943c4f76cc2e upstream.

When merging 2 drivers common object files were not deduplicated.

Fixes: dcec16efd677 ("drm/sti: Build monolithic driver")
Cc: stable@kernel.org
Signed-off-by: Rolf Eike Beer 
Reviewed-by: Dmitry Baryshkov 
Link: https://lore.kernel.org/r/1920148.tdWV9SEqCh@devpool47.emlix.com
Signed-off-by: Raphael Gallais-Pou 
Signed-off-by: Greg Kroah-Hartman

drm/nouveau: prime: fix ttm_bo_delayed_delete oops

2025-05-02T05:39:21+00:00

commit 8ec0fbb28d049273bfd4f1e7a5ae4c74884beed3 upstream.

Fix an oops in ttm_bo_delayed_delete which results from dererencing a
dangling pointer:

Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b7b: 0000 [#1] PREEMPT SMP
CPU: 4 UID: 0 PID: 1082 Comm: kworker/u65:2 Not tainted 6.14.0-rc4-00267-g505460b44513-dirty #216
Hardware name: LENOVO 82N6/LNVNB161216, BIOS GKCN65WW 01/16/2024
Workqueue: ttm ttm_bo_delayed_delete [ttm]
RIP: 0010:dma_resv_iter_first_unlocked+0x55/0x290
Code: 31 f6 48 c7 c7 00 2b fa aa e8 97 bd 52 ff e8 a2 c1 53 00 5a 85 c0 74 48 e9 88 01 00 00 4c 89 63 20 4d 85 e4 0f 84 30 01 00 00 <41> 8b 44 24 10 c6 43 2c 01 48 89 df 89 43 28 e8 97 fd ff ff 4c 8b
RSP: 0018:ffffbf9383473d60 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffffbf9383473d88 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffbf9383473d78 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 6b6b6b6b6b6b6b6b
R13: ffffa003bbf78580 R14: ffffa003a6728040 R15: 00000000000383cc
FS:  0000000000000000(0000) GS:ffffa00991c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000758348024dd0 CR3: 000000012c259000 CR4: 0000000000f50ef0
PKRU: 55555554
Call Trace:
 
 ? __die_body.cold+0x19/0x26
 ? die_addr+0x3d/0x70
 ? exc_general_protection+0x159/0x460
 ? asm_exc_general_protection+0x27/0x30
 ? dma_resv_iter_first_unlocked+0x55/0x290
 dma_resv_wait_timeout+0x56/0x100
 ttm_bo_delayed_delete+0x69/0xb0 [ttm]
 process_one_work+0x217/0x5c0
 worker_thread+0x1c8/0x3d0
 ? apply_wqattrs_cleanup.part.0+0xc0/0xc0
 kthread+0x10b/0x240
 ? kthreads_online_cpu+0x140/0x140
 ret_from_fork+0x40/0x70
 ? kthreads_online_cpu+0x140/0x140
 ret_from_fork_asm+0x11/0x20
 

The cause of this is:

- drm_prime_gem_destroy calls dma_buf_put(dma_buf) which releases the
  reference to the shared dma_buf. The reference count is 0, so the
  dma_buf is destroyed, which in turn decrements the corresponding
  amdgpu_bo reference count to 0, and the amdgpu_bo is destroyed -
  calling drm_gem_object_release then dma_resv_fini (which destroys the
  reservation object), then finally freeing the amdgpu_bo.

- nouveau_bo obj->bo.base.resv is now a dangling pointer to the memory
  formerly allocated to the amdgpu_bo.

- nouveau_gem_object_del calls ttm_bo_put(&nvbo->bo) which calls
  ttm_bo_release, which schedules ttm_bo_delayed_delete.

- ttm_bo_delayed_delete runs and dereferences the dangling resv pointer,
  resulting in a general protection fault.

Fix this by moving the drm_prime_gem_destroy call from
nouveau_gem_object_del to nouveau_bo_del_ttm. This ensures that it will
be run after ttm_bo_delayed_delete.

Signed-off-by: Chris Bainbridge 
Suggested-by: Christian König 
Fixes: 22b33e8ed0e3 ("nouveau: add PRIME support")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3937
Cc: Stable@vger.kernel.org
Signed-off-by: Danilo Krummrich 
Link: https://patchwork.freedesktop.org/patch/msgid/Z-P4epVK8k7tFZ7C@debian.local
Signed-off-by: Greg Kroah-Hartman

drm/repaper: fix integer overflows in repeat functions

2025-05-02T05:39:21+00:00

commit 4d098000ac193f359e6b8ca4801dbdbd6a27b41f upstream.

There are conditions, albeit somewhat unlikely, under which right hand
expressions, calculating the end of time period in functions like
repaper_frame_fixed_repeat(), may overflow.

For instance, if 'factor10x' in repaper_get_temperature() is high
enough (170), as is 'epd->stage_time' in repaper_probe(), then the
resulting value of 'end' will not fit in unsigned int expression.

Mitigate this by casting 'epd->factored_stage_time' to wider type before
any multiplication is done.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 3589211e9b03 ("drm/tinydrm: Add RePaper e-ink driver")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich 
Signed-off-by: Alex Lanzano 
Link: https://patchwork.freedesktop.org/patch/msgid/20250116134801.22067-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman

drm/mediatek: mtk_dpi: Explicitly manage TVD clock in power on/off

2025-05-02T05:39:12+00:00

[ Upstream commit 473c33f5ce651365468503c76f33158aaa1c7dd2 ]

In preparation for adding support for MT8195's HDMI reserved
DPI, add calls to clk_prepare_enable() / clk_disable_unprepare()
for the TVD clock: in this particular case, the aforementioned
clock is not (and cannot be) parented to neither pixel or engine
clocks hence it won't get enabled automatically by the clock
framework.

Please note that on all of the currently supported MediaTek
platforms, the TVD clock is always a parent of either pixel or
engine clocks, and this means that the common clock framework
is already enabling this clock before the children.
On such platforms, this commit will only increase the refcount
of the TVD clock without any functional change.

Reviewed-by: CK Hu 
Signed-off-by: AngeloGioacchino Del Regno 
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250217154836.108895-10-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu 
Signed-off-by: Sasha Levin

drm/amdkfd: Fix pqm_destroy_queue race with GPU reset

2025-05-02T05:39:12+00:00

[ Upstream commit 7919b4cad5545ed93778f11881ceee72e4dbed66 ]

If GPU in reset, destroy_queue return -EIO, pqm_destroy_queue should
delete the queue from process_queue_list and free the resource.

Signed-off-by: Philip Yang 
Reviewed-by: Felix Kuehling 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

drm/amdkfd: clamp queue size to minimum

2025-05-02T05:39:12+00:00

[ Upstream commit e90711946b53590371ecce32e8fcc381a99d6333 ]

If queue size is less than minimum, clamp it to minimum to prevent
underflow when writing queue mqd.

Signed-off-by: David Yat Sin 
Reviewed-by: Jay Cornwall 
Reviewed-by: Harish Kasiviswanathan 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

drm: panel-orientation-quirks: Add new quirk for GPD Win 2

2025-05-02T05:39:12+00:00

[ Upstream commit a860eb9c6ba6cdbf32e3e01a606556e5a90a2931 ]

Some GPD Win 2 units shipped with the correct DMI strings.

Add a DMI match to correctly rotate the panel on these units.

Signed-off-by: Andrew Wyatt 
Signed-off-by: John Edwards 
Tested-by: Paco Avelar 
Reviewed-by: Thomas Zimmermann 
Reviewed-by: Hans de Goede 
Signed-off-by: Thomas Zimmermann 
Link: https://patchwork.freedesktop.org/patch/msgid/20250213222455.93533-5-uejji@uejji.net
Signed-off-by: Sasha Levin

drm: panel-orientation-quirks: Add support for AYANEO 2S

2025-05-02T05:39:12+00:00

[ Upstream commit eb8f1e3e8ee10cff591d4a47437dfd34d850d454 ]

AYANEO 2S uses the same panel and orientation as the AYANEO 2.

Update the AYANEO 2 DMI match to also match AYANEO 2S.

Signed-off-by: Andrew Wyatt 
Signed-off-by: John Edwards 
Tested-by: John Edwards 
Reviewed-by: Thomas Zimmermann 
Reviewed-by: Hans de Goede 
Signed-off-by: Thomas Zimmermann 
Link: https://patchwork.freedesktop.org/patch/msgid/20250213222455.93533-2-uejji@uejji.net
Signed-off-by: Sasha Levin

drm: allow encoder mode_set even when connectors change for crtc

2025-05-02T05:39:11+00:00

[ Upstream commit 7e182cb4f5567f53417b762ec0d679f0b6f0039d ]

In certain use-cases, a CRTC could switch between two encoders
and because the mode being programmed on the CRTC remains
the same during this switch, the CRTC's mode_changed remains false.
In such cases, the encoder's mode_set also gets skipped.

Skipping mode_set on the encoder for such cases could cause an issue
because even though the same CRTC mode was being used, the encoder
type could have changed like the CRTC could have switched from a
real time encoder to a writeback encoder OR vice-versa.

Allow encoder's mode_set to happen even when connectors changed on a
CRTC and not just when the mode changed.

Signed-off-by: Abhinav Kumar 
Signed-off-by: Jessica Zhang 
Reviewed-by: Maxime Ripard 
Link: https://patchwork.freedesktop.org/patch/msgid/20241211-abhinavk-modeset-fix-v3-1-0de4bf3e7c32@quicinc.com
Signed-off-by: Dmitry Baryshkov 
Signed-off-by: Sasha Levin