linux-stable.git/drivers/gpu, branch v5.4.246 Linux kernel stable tree drm/edid: fix objtool warning in drm_cvt_modes() 2023-06-09T08:29:04+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-12-17T17:27:57+00:00 6c0fc4725f6ffd4526a261e90176ecf7629d5e70 commit d652d5f1eeeb06046009f4fcb9b4542249526916 upstream. Commit 991fcb77f490 ("drm/edid: Fix uninitialized variable in drm_cvt_modes()") just replaced one warning with another. The original warning about a possibly uninitialized variable was due to the compiler not being smart enough to see that the case statement actually enumerated all possible cases. And the initial fix was just to add a "default" case that had a single "unreachable()", just to tell the compiler that that situation cannot happen. However, that doesn't actually fix the fundamental reason for the problem: the compiler still doesn't see that the existing case statements enumerate all possibilities, so the compiler will still generate code to jump to that unreachable case statement. It just won't complain about an uninitialized variable any more. So now the compiler generates code to our inline asm marker that we told it would not fall through, and end end result is basically random. We have created a bridge to nowhere. And then, depending on the random details of just exactly what the compiler ends up doing, 'objtool' might end up complaining about the conditional branches (for conditions that cannot happen, and that thus will never be taken - but if the compiler was not smart enough to figure that out, we can't expect objtool to do so) going off in the weeds. So depending on how the compiler has laid out the result, you might see something like this: drivers/gpu/drm/drm_edid.o: warning: objtool: do_cvt_mode() falls through to next function drm_mode_detailed.isra.0() and now you have a truly inscrutable warning that makes no sense at all unless you start looking at whatever random code the compiler happened to generate for our bare "unreachable()" statement. IOW, don't use "unreachable()" unless you have an _active_ operation that generates code that actually makes it obvious that something is not reachable (ie an UD instruction or similar). Solve the "compiler isn't smart enough" problem by just marking one of the cases as "default", so that even when the compiler doesn't otherwise see that we've enumerated all cases, the compiler will feel happy and safe about there always being a valid case that initializes the 'width' variable. This also generates better code, since now the compiler doesn't generate comparisons for five different possibilities (the four real ones and the one that can't happen), but just for the three real ones and "the rest" (which is that last one). A smart enough compiler that sees that we cover all the cases won't care. Cc: Lyude Paul <lyude@redhat.com> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d652d5f1eeeb06046009f4fcb9b4542249526916 upstream.

Commit 991fcb77f490 ("drm/edid: Fix uninitialized variable in
drm_cvt_modes()") just replaced one warning with another.

The original warning about a possibly uninitialized variable was due to
the compiler not being smart enough to see that the case statement
actually enumerated all possible cases.  And the initial fix was just to
add a "default" case that had a single "unreachable()", just to tell the
compiler that that situation cannot happen.

However, that doesn't actually fix the fundamental reason for the
problem: the compiler still doesn't see that the existing case
statements enumerate all possibilities, so the compiler will still
generate code to jump to that unreachable case statement.  It just won't
complain about an uninitialized variable any more.

So now the compiler generates code to our inline asm marker that we told
it would not fall through, and end end result is basically random.  We
have created a bridge to nowhere.

And then, depending on the random details of just exactly what the
compiler ends up doing, 'objtool' might end up complaining about the
conditional branches (for conditions that cannot happen, and that thus
will never be taken - but if the compiler was not smart enough to figure
that out, we can't expect objtool to do so) going off in the weeds.

So depending on how the compiler has laid out the result, you might see
something like this:

    drivers/gpu/drm/drm_edid.o: warning: objtool: do_cvt_mode() falls through to next function drm_mode_detailed.isra.0()

and now you have a truly inscrutable warning that makes no sense at all
unless you start looking at whatever random code the compiler happened
to generate for our bare "unreachable()" statement.

IOW, don't use "unreachable()" unless you have an _active_ operation
that generates code that actually makes it obvious that something is not
reachable (ie an UD instruction or similar).

Solve the "compiler isn't smart enough" problem by just marking one of
the cases as "default", so that even when the compiler doesn't otherwise
see that we've enumerated all cases, the compiler will feel happy and
safe about there always being a valid case that initializes the 'width'
variable.

This also generates better code, since now the compiler doesn't generate
comparisons for five different possibilities (the four real ones and the
one that can't happen), but just for the three real ones and "the rest"
(which is that last one).

A smart enough compiler that sees that we cover all the cases won't care.

Cc: Lyude Paul <lyude@redhat.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/edid: Fix uninitialized variable in drm_cvt_modes() 2023-06-09T08:29:04+00:00 Lyude Paul lyude@redhat.com 2020-11-05T23:57:02+00:00 58bc9baaef925e41f8b43d0e7f1e929f7af3628e commit 991fcb77f490390bcad89fa67d95763c58cdc04c upstream. Noticed this when trying to compile with -Wall on a kernel fork. We potentially don't set width here, which causes the compiler to complain about width potentially being uninitialized in drm_cvt_modes(). So, let's fix that. Changes since v1: * Don't emit an error as this code isn't reachable, just mark it as such Changes since v2: * Remove now unused variable Fixes: 3f649ab728cd ("treewide: Remove uninitialized_var() usage") Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu> Link: https://patchwork.freedesktop.org/patch/msgid/20201105235703.1328115-1-lyude@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 991fcb77f490390bcad89fa67d95763c58cdc04c upstream.

Noticed this when trying to compile with -Wall on a kernel fork. We
potentially don't set width here, which causes the compiler to complain
about width potentially being uninitialized in drm_cvt_modes(). So, let's
fix that.

Changes since v1:
* Don't emit an error as this code isn't reachable, just mark it as such
Changes since v2:
* Remove now unused variable

Fixes: 3f649ab728cd ("treewide: Remove uninitialized_var() usage")
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105235703.1328115-1-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
treewide: Remove uninitialized_var() usage 2023-06-09T08:29:01+00:00 Kees Cook keescook@chromium.org 2020-06-03T20:09:38+00:00 0638dcc7e75fbb766761e7b4694d0f0f141bbbd1 commit 3f649ab728cda8038259d8f14492fe400fbab911 upstream. Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 3f649ab728cda8038259d8f14492fe400fbab911 upstream.

Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.

In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:

git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
	xargs perl -pi -e \
		's/\buninitialized_var\(([^\)]+)\)/\1/g;
		 s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'

drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.

No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.

[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/

Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/exynos: fix g2d_open/close helper function definitions 2023-05-30T11:44:05+00:00 Arnd Bergmann arnd@arndb.de 2023-04-17T21:04:11+00:00 ed50fcab1435352a739c871ba7fad8c152210c16 [ Upstream commit 2ef0785b30bd6549ddbc124979f1b6596e065ae2 ] The empty stub functions are defined as global functions, which causes a warning because of missing prototypes: drivers/gpu/drm/exynos/exynos_drm_g2d.h:37:5: error: no previous prototype for 'g2d_open' drivers/gpu/drm/exynos/exynos_drm_g2d.h:42:5: error: no previous prototype for 'g2d_close' Mark them as 'static inline' to avoid the warning and to make them behave as intended. Fixes: eb4d9796fa34 ("drm/exynos: g2d: Convert to driver component API") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2ef0785b30bd6549ddbc124979f1b6596e065ae2 ]

The empty stub functions are defined as global functions, which
causes a warning because of missing prototypes:

drivers/gpu/drm/exynos/exynos_drm_g2d.h:37:5: error: no previous prototype for 'g2d_open'
drivers/gpu/drm/exynos/exynos_drm_g2d.h:42:5: error: no previous prototype for 'g2d_close'

Mark them as 'static inline' to avoid the warning and to make
them behave as intended.

Fixes: eb4d9796fa34 ("drm/exynos: g2d: Convert to driver component API")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/tegra: Avoid potential 32-bit integer overflow 2023-05-30T11:44:02+00:00 Nur Hussein hussein@unixcat.org 2023-04-05T20:25:59+00:00 99c8f2e6f33a17a812f3865f23be479aca98b59f [ Upstream commit 2429b3c529da29d4277d519bd66d034842dcd70c ] In tegra_sor_compute_config(), the 32-bit value mode->clock is multiplied by 1000, and assigned to the u64 variable pclk. We can avoid a potential 32-bit integer overflow by casting mode->clock to u64 before we do the arithmetic and assignment. Signed-off-by: Nur Hussein <hussein@unixcat.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2429b3c529da29d4277d519bd66d034842dcd70c ]

In tegra_sor_compute_config(), the 32-bit value mode->clock is
multiplied by 1000, and assigned to the u64 variable pclk. We can avoid
a potential 32-bit integer overflow by casting mode->clock to u64 before
we do the arithmetic and assignment.

Signed-off-by: Nur Hussein <hussein@unixcat.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/amd/display: Use DC_LOG_DC in the trasform pixel function 2023-05-30T11:44:02+00:00 Rodrigo Siqueira Rodrigo.Siqueira@amd.com 2022-11-01T14:20:09+00:00 9b72cb394f962aeb22f0453523c67ac17100cd73 [ Upstream commit 7222f5841ff49709ca666b05ff336776e0664a20 ] [Why & How] DC now uses a new commit sequence which is more robust since it addresses cases where we need to reorganize pipes based on planes and other parameters. As a result, this new commit sequence reset the DC state by cleaning plane states and re-creating them accordingly with the need. For this reason, the dce_transform_set_pixel_storage_depth can be invoked after a plane state is destroyed and before its re-creation. In this situation and on DCE devices, DC will hit a condition that will trigger a dmesg log that looks like this: Console: switching to colour frame buffer device 240x67 ------------[ cut here ]------------ [..] Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 5603 07/28/2020 RIP: 0010:dce_transform_set_pixel_storage_depth+0x3f8/0x480 [amdgpu] [..] RSP: 0018:ffffc9000202b850 EFLAGS: 00010293 RAX: ffffffffa081d100 RBX: ffff888110790000 RCX: 000000000000000c RDX: ffff888100bedbf8 RSI: 0000000000001a50 RDI: ffff88810463c900 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000007 R10: 0000000000000001 R11: 0000000000000f00 R12: ffff88810f500010 R13: ffff888100bedbf8 R14: ffff88810f515688 R15: 0000000000000000 FS: 00007ff0159249c0(0000) GS:ffff88840e940000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff01528e550 CR3: 0000000002a10000 CR4: 00000000003506e0 Call Trace: <TASK> ? dm_write_reg_func+0x21/0x80 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] dc_stream_set_dither_option+0xfb/0x130 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] amdgpu_dm_crtc_configure_crc_source+0x10b/0x190 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] amdgpu_dm_atomic_commit_tail+0x20a8/0x2a90 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] ? free_unref_page_commit+0x98/0x170 ? free_unref_page+0xcc/0x150 commit_tail+0x94/0x120 drm_atomic_helper_commit+0x10f/0x140 drm_atomic_commit+0x94/0xc0 ? drm_plane_get_damage_clips.cold+0x1c/0x1c drm_client_modeset_commit_atomic+0x203/0x250 drm_client_modeset_commit_locked+0x56/0x150 drm_client_modeset_commit+0x21/0x40 drm_fb_helper_lastclose+0x42/0x70 amdgpu_driver_lastclose_kms+0xa/0x10 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] drm_release+0xda/0x110 __fput+0x89/0x240 task_work_run+0x5c/0x90 do_exit+0x333/0xae0 do_group_exit+0x2d/0x90 __x64_sys_exit_group+0x14/0x20 do_syscall_64+0x5b/0x80 ? exit_to_user_mode_prepare+0x1e/0x140 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7ff016ceaca1 Code: Unable to access opcode bytes at RIP 0x7ff016ceac77. RSP: 002b:00007ffe7a2357e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00007ff016e15a00 RCX: 00007ff016ceaca1 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffffffffffffff78 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ff016e15a00 R13: 0000000000000000 R14: 00007ff016e1aee8 R15: 00007ff016e1af00 </TASK> Since this issue only happens in a transition state on DC, this commit replace BREAK_TO_DEBUGGER with DC_LOG_DC. Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 7222f5841ff49709ca666b05ff336776e0664a20 ]

[Why & How]
DC now uses a new commit sequence which is more robust since it
addresses cases where we need to reorganize pipes based on planes and
other parameters. As a result, this new commit sequence reset the DC
state by cleaning plane states and re-creating them accordingly with the
need. For this reason, the dce_transform_set_pixel_storage_depth can be
invoked after a plane state is destroyed and before its re-creation. In
this situation and on DCE devices, DC will hit a condition that will
trigger a dmesg log that looks like this:

Console: switching to colour frame buffer device 240x67
------------[ cut here ]------------
[..]
Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 5603 07/28/2020
RIP: 0010:dce_transform_set_pixel_storage_depth+0x3f8/0x480 [amdgpu]
[..]
RSP: 0018:ffffc9000202b850 EFLAGS: 00010293
RAX: ffffffffa081d100 RBX: ffff888110790000 RCX: 000000000000000c
RDX: ffff888100bedbf8 RSI: 0000000000001a50 RDI: ffff88810463c900
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000007
R10: 0000000000000001 R11: 0000000000000f00 R12: ffff88810f500010
R13: ffff888100bedbf8 R14: ffff88810f515688 R15: 0000000000000000
FS:  00007ff0159249c0(0000) GS:ffff88840e940000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ff01528e550 CR3: 0000000002a10000 CR4: 00000000003506e0
Call Trace:
 <TASK>
 ? dm_write_reg_func+0x21/0x80 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8]
 dc_stream_set_dither_option+0xfb/0x130 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8]
 amdgpu_dm_crtc_configure_crc_source+0x10b/0x190 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8]
 amdgpu_dm_atomic_commit_tail+0x20a8/0x2a90 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8]
 ? free_unref_page_commit+0x98/0x170
 ? free_unref_page+0xcc/0x150
 commit_tail+0x94/0x120
 drm_atomic_helper_commit+0x10f/0x140
 drm_atomic_commit+0x94/0xc0
 ? drm_plane_get_damage_clips.cold+0x1c/0x1c
 drm_client_modeset_commit_atomic+0x203/0x250
 drm_client_modeset_commit_locked+0x56/0x150
 drm_client_modeset_commit+0x21/0x40
 drm_fb_helper_lastclose+0x42/0x70
 amdgpu_driver_lastclose_kms+0xa/0x10 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8]
 drm_release+0xda/0x110
 __fput+0x89/0x240
 task_work_run+0x5c/0x90
 do_exit+0x333/0xae0
 do_group_exit+0x2d/0x90
 __x64_sys_exit_group+0x14/0x20
 do_syscall_64+0x5b/0x80
 ? exit_to_user_mode_prepare+0x1e/0x140
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7ff016ceaca1
Code: Unable to access opcode bytes at RIP 0x7ff016ceac77.
RSP: 002b:00007ffe7a2357e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 00007ff016e15a00 RCX: 00007ff016ceaca1
RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffffffffffffff78 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007ff016e15a00
R13: 0000000000000000 R14: 00007ff016e1aee8 R15: 00007ff016e1af00
 </TASK>

Since this issue only happens in a transition state on DC, this commit
replace BREAK_TO_DEBUGGER with DC_LOG_DC.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/mipi-dsi: Set the fwnode for mipi_dsi_device 2023-05-30T11:44:01+00:00 Saravana Kannan saravanak@google.com 2023-03-10T06:39:09+00:00 22b8ac608af5b8a859ed9dc0b15f31dea26cdbb0 [ Upstream commit a26cc2934331b57b5a7164bff344f0a2ec245fc0 ] After commit 3fb16866b51d ("driver core: fw_devlink: Make cycle detection more robust"), fw_devlink prints an error when consumer devices don't have their fwnode set. This used to be ignored silently. Set the fwnode mipi_dsi_device so fw_devlink can find them and properly track their dependencies. This fixes errors like this: [ 0.334054] nwl-dsi 30a00000.mipi-dsi: Failed to create device link with regulator-lcd-1v8 [ 0.346964] nwl-dsi 30a00000.mipi-dsi: Failed to create device link with backlight-dsi Reported-by: Martin Kepplinger <martin.kepplinger@puri.sm> Link: https://lore.kernel.org/lkml/2a8e407f4f18c9350f8629a2b5fa18673355b2ae.camel@puri.sm/ Fixes: 068a00233969 ("drm: Add MIPI DSI bus support") Signed-off-by: Saravana Kannan <saravanak@google.com> Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> Link: https://lore.kernel.org/r/20230310063910.2474472-1-saravanak@google.com Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a26cc2934331b57b5a7164bff344f0a2ec245fc0 ]

After commit 3fb16866b51d ("driver core: fw_devlink: Make cycle
detection more robust"), fw_devlink prints an error when consumer
devices don't have their fwnode set. This used to be ignored silently.

Set the fwnode mipi_dsi_device so fw_devlink can find them and properly
track their dependencies.

This fixes errors like this:
[    0.334054] nwl-dsi 30a00000.mipi-dsi: Failed to create device link with regulator-lcd-1v8
[    0.346964] nwl-dsi 30a00000.mipi-dsi: Failed to create device link with backlight-dsi

Reported-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Link: https://lore.kernel.org/lkml/2a8e407f4f18c9350f8629a2b5fa18673355b2ae.camel@puri.sm/
Fixes: 068a00233969 ("drm: Add MIPI DSI bus support")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Link: https://lore.kernel.org/r/20230310063910.2474472-1-saravanak@google.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/amd/display: Fix hang when skipping modeset 2023-05-17T09:36:05+00:00 Aurabindo Pillai aurabindo.pillai@amd.com 2023-03-24T14:42:37+00:00 d60f15682a5ce51e8119c1b9ff522494554e33b5 commit da5e14909776edea4462672fb4a3007802d262e7 upstream. [Why&How] When skipping full modeset since the only state change was a front porch change, the DC commit sequence requires extra checks to handle non existant plane states being asked to be removed from context. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit da5e14909776edea4462672fb4a3007802d262e7 upstream.

[Why&How]

When skipping full modeset since the only state change was a front porch
change, the DC commit sequence requires extra checks to handle non
existant plane states being asked to be removed from context.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/exynos: move to use request_irq by IRQF_NO_AUTOEN flag 2023-05-17T09:36:05+00:00 Tian Tao tiantao6@hisilicon.com 2021-03-15T11:49:37+00:00 3f231e30cdeb18d2af68af63e6650bb7f5652450 commit a4e5eed2c6a689ef2b6ad8d7ae86665c69039379 upstream. After this patch cbe16f35bee68 genirq: Add IRQF_NO_AUTOEN for request_irq/nmi() is merged. request_irq() after setting IRQ_NOAUTOEN as below irq_set_status_flags(irq, IRQ_NOAUTOEN); request_irq(dev, irq...); can be replaced by request_irq() with IRQF_NO_AUTOEN flag. v2: Fix the problem of using wrong flags Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit a4e5eed2c6a689ef2b6ad8d7ae86665c69039379 upstream.

After this patch cbe16f35bee68 genirq: Add IRQF_NO_AUTOEN for
request_irq/nmi() is merged. request_irq() after setting
IRQ_NOAUTOEN as below

irq_set_status_flags(irq, IRQ_NOAUTOEN);
request_irq(dev, irq...);
can be replaced by request_irq() with IRQF_NO_AUTOEN flag.

v2:
Fix the problem of using wrong flags

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup() 2023-05-17T09:36:05+00:00 Akhil P Oommen quic_akhilpo@quicinc.com 2022-12-21T15:09:56+00:00 65a8b6d129cfcf63a2b8a36a63d275479ba6a217 commit dbeedbcb268d055d8895aceca427f897e12c2b50 upstream. Fix the below kernel panic due to null pointer access: [ 18.504431] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048 [ 18.513464] Mem abort info: [ 18.516346] ESR = 0x0000000096000005 [ 18.520204] EC = 0x25: DABT (current EL), IL = 32 bits [ 18.525706] SET = 0, FnV = 0 [ 18.528878] EA = 0, S1PTW = 0 [ 18.532117] FSC = 0x05: level 1 translation fault [ 18.537138] Data abort info: [ 18.540110] ISV = 0, ISS = 0x00000005 [ 18.544060] CM = 0, WnR = 0 [ 18.547109] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000112826000 [ 18.553738] [0000000000000048] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 18.562690] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP **Snip** [ 18.696758] Call trace: [ 18.699278] adreno_gpu_cleanup+0x30/0x88 [ 18.703396] a6xx_destroy+0xc0/0x130 [ 18.707066] a6xx_gpu_init+0x308/0x424 [ 18.710921] adreno_bind+0x178/0x288 [ 18.714590] component_bind_all+0xe0/0x214 [ 18.718797] msm_drm_bind+0x1d4/0x614 [ 18.722566] try_to_bring_up_aggregate_device+0x16c/0x1b8 [ 18.728105] __component_add+0xa0/0x158 [ 18.732048] component_add+0x20/0x2c [ 18.735719] adreno_probe+0x40/0xc0 [ 18.739300] platform_probe+0xb4/0xd4 [ 18.743068] really_probe+0xfc/0x284 [ 18.746738] __driver_probe_device+0xc0/0xec [ 18.751129] driver_probe_device+0x48/0x110 [ 18.755421] __device_attach_driver+0xa8/0xd0 [ 18.759900] bus_for_each_drv+0x90/0xdc [ 18.763843] __device_attach+0xfc/0x174 [ 18.767786] device_initial_probe+0x20/0x2c [ 18.772090] bus_probe_device+0x40/0xa0 [ 18.776032] deferred_probe_work_func+0x94/0xd0 [ 18.780686] process_one_work+0x190/0x3d0 [ 18.784805] worker_thread+0x280/0x3d4 [ 18.788659] kthread+0x104/0x1c0 [ 18.791981] ret_from_fork+0x10/0x20 [ 18.795654] Code: f9400408 aa0003f3 aa1f03f4 91142015 (f9402516) [ 18.801913] ---[ end trace 0000000000000000 ]--- [ 18.809039] Kernel panic - not syncing: Oops: Fatal exception Fixes: 17e822f7591f ("drm/msm: fix unbalanced pm_runtime_enable in adreno_gpu_{init, cleanup}") Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/515605/ Link: https://lore.kernel.org/r/20221221203925.v2.1.Ib978de92c4bd000b515486aad72e96c2481f84d0@changeid Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit dbeedbcb268d055d8895aceca427f897e12c2b50 upstream.

Fix the below kernel panic due to null pointer access:
[   18.504431] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048
[   18.513464] Mem abort info:
[   18.516346]   ESR = 0x0000000096000005
[   18.520204]   EC = 0x25: DABT (current EL), IL = 32 bits
[   18.525706]   SET = 0, FnV = 0
[   18.528878]   EA = 0, S1PTW = 0
[   18.532117]   FSC = 0x05: level 1 translation fault
[   18.537138] Data abort info:
[   18.540110]   ISV = 0, ISS = 0x00000005
[   18.544060]   CM = 0, WnR = 0
[   18.547109] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000112826000
[   18.553738] [0000000000000048] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[   18.562690] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
**Snip**
[   18.696758] Call trace:
[   18.699278]  adreno_gpu_cleanup+0x30/0x88
[   18.703396]  a6xx_destroy+0xc0/0x130
[   18.707066]  a6xx_gpu_init+0x308/0x424
[   18.710921]  adreno_bind+0x178/0x288
[   18.714590]  component_bind_all+0xe0/0x214
[   18.718797]  msm_drm_bind+0x1d4/0x614
[   18.722566]  try_to_bring_up_aggregate_device+0x16c/0x1b8
[   18.728105]  __component_add+0xa0/0x158
[   18.732048]  component_add+0x20/0x2c
[   18.735719]  adreno_probe+0x40/0xc0
[   18.739300]  platform_probe+0xb4/0xd4
[   18.743068]  really_probe+0xfc/0x284
[   18.746738]  __driver_probe_device+0xc0/0xec
[   18.751129]  driver_probe_device+0x48/0x110
[   18.755421]  __device_attach_driver+0xa8/0xd0
[   18.759900]  bus_for_each_drv+0x90/0xdc
[   18.763843]  __device_attach+0xfc/0x174
[   18.767786]  device_initial_probe+0x20/0x2c
[   18.772090]  bus_probe_device+0x40/0xa0
[   18.776032]  deferred_probe_work_func+0x94/0xd0
[   18.780686]  process_one_work+0x190/0x3d0
[   18.784805]  worker_thread+0x280/0x3d4
[   18.788659]  kthread+0x104/0x1c0
[   18.791981]  ret_from_fork+0x10/0x20
[   18.795654] Code: f9400408 aa0003f3 aa1f03f4 91142015 (f9402516)
[   18.801913] ---[ end trace 0000000000000000 ]---
[   18.809039] Kernel panic - not syncing: Oops: Fatal exception

Fixes: 17e822f7591f ("drm/msm: fix unbalanced pm_runtime_enable in adreno_gpu_{init, cleanup}")
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/515605/
Link: https://lore.kernel.org/r/20221221203925.v2.1.Ib978de92c4bd000b515486aad72e96c2481f84d0@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>