linux-stable.git/drivers/gpu, branch v5.10.74

drm/amdgpu: fix gart.bo pin_count leak

2021-10-17T08:43:33+00:00

[ Upstream commit 66805763a97f8f7bdf742fc0851d85c02ed9411f ]

gmc_v{9,10}_0_gart_disable() isn't called matched with
correspoding gart_enbale function in SRIOV case. This will
lead to gart.bo pin_count leak on driver unload.

Cc: Hawking Zhang 
Signed-off-by: Leslie Shi 
Signed-off-by: Guchun Chen 
Reviewed-by: Christian König 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

drm/nouveau/debugfs: fix file release memory leak

2021-10-13T08:04:28+00:00

[ Upstream commit f5a8703a9c418c6fc54eb772712dfe7641e3991c ]

When using single_open() for opening, single_release() should be
called, otherwise the 'op' allocated in single_open() will be leaked.

Fixes: 6e9fc177399f ("drm/nouveau/debugfs: add copy of sysfs pstate interface ported to debugfs")
Reported-by: Hulk Robot 
Signed-off-by: Yang Yingliang 
Reviewed-by: Karol Herbst 
Signed-off-by: Karol Herbst 
Link: https://patchwork.freedesktop.org/patch/msgid/20210911075023.3969054-2-yangyingliang@huawei.com
Signed-off-by: Maarten Lankhorst 
Signed-off-by: Sasha Levin

drm/nouveau/kms/nv50-: fix file release memory leak

2021-10-13T08:04:28+00:00

[ Upstream commit 0b3d4945cc7e7ea1acd52cb06dfa83bfe265b6d5 ]

When using single_open() for opening, single_release() should be
called, otherwise the 'op' allocated in single_open() will be leaked.

Fixes: 12885ecbfe62 ("drm/nouveau/kms/nvd9-: Add CRC support")
Reported-by: Hulk Robot 
Signed-off-by: Yang Yingliang 
Reviewed-by: Karol Herbst 
Signed-off-by: Karol Herbst 
Link: https://patchwork.freedesktop.org/patch/msgid/20210911075023.3969054-1-yangyingliang@huawei.com
Signed-off-by: Maarten Lankhorst 
Signed-off-by: Sasha Levin

drm/nouveau: avoid a use-after-free when BO init fails

2021-10-13T08:04:28+00:00

[ Upstream commit bcf34aa5082ee2343574bc3f4d1c126030913e54 ]

nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code
back to the caller. On failures, ttm_bo_init() invokes the provided
destructor which should de-initialize and free the memory.

Thus, when nouveau_bo_init() returns an error the gem object has already
been released and the memory freed by nouveau_bo_del_ttm().

Fixes: 019cbd4a4feb ("drm/nouveau: Initialize GEM object before TTM object")
Cc: Thierry Reding 
Signed-off-by: Jeremy Cline 
Reviewed-by: Lyude Paul 
Reviewed-by: Karol Herbst 
Signed-off-by: Karol Herbst 
Link: https://patchwork.freedesktop.org/patch/msgid/20201203000220.18238-1-jcline@redhat.com
Signed-off-by: Maarten Lankhorst 
Signed-off-by: Sasha Levin

drm/sun4i: dw-hdmi: Fix HDMI PHY clock setup

2021-10-13T08:04:28+00:00

[ Upstream commit c64c8e04a12ed3e2238761e26cda78e72550dc98 ]

Recent rework, which made HDMI PHY driver a platform device, inadvertely
reversed clock setup order. HW is very touchy about it. Proper way is to
handle controllers resets and clocks first and HDMI PHYs second.

Currently, without this fix, first mode set completely fails (nothing on
HDMI monitor) on H3 era PHYs. On H6, it still somehow work.

Move HDMI PHY reset & clocks handling to sun8i_hdmi_phy_init() which
will assure that code is executed after controllers reset & clocks are
handled. Additionally, add sun8i_hdmi_phy_deinit() which will deinit
them at controllers driver unload.

Tested on A64, H3, H6 and R40.

Fixes: 9bf3797796f5 ("drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device")
Signed-off-by: Jernej Skrabec 
Signed-off-by: Maxime Ripard 
Link: https://patchwork.freedesktop.org/patch/msgid/20210915175836.3158839-1-jernej.skrabec@gmail.com
Signed-off-by: Maarten Lankhorst 
Signed-off-by: Sasha Levin

drm/nouveau/kms/tu102-: delay enabling cursor until after assign_windows

2021-10-13T08:04:23+00:00

commit f732e2e34aa08493fdd762f3daa4e5f16bbf1e45 upstream.

Prevent NVD core channel error code 67 occuring and hanging display,
managed to reproduce on GA102 while testing suspend/resume scenarios.

Required extension of earlier commit to fix interactions with EFI.

Fixes: e78b1b545c6c ("drm/nouveau/kms/nv50: workaround EFI GOP window channel format differences")
Signed-off-by: Ben Skeggs 
Cc: Lyude Paul 
Cc: Karol Herbst 
Cc:  # v5.12+
Reviewed-by: Karol Herbst 
Signed-off-by: Karol Herbst 
Link: https://patchwork.freedesktop.org/patch/msgid/20210906005628.11499-2-skeggsb@gmail.com
Signed-off-by: Maarten Lankhorst 
Signed-off-by: Greg Kroah-Hartman

drm/i915/request: fix early tracepoints

2021-10-06T13:55:54+00:00

[ Upstream commit c83ff0186401169eb27ce5057d820b7a863455c3 ]

Currently we blow up in trace_dma_fence_init, when calling into
get_driver_name or get_timeline_name, since both the engine and context
might be NULL(or contain some garbage address) in the case of newly
allocated slab objects via the request ctor. Note that we also use
SLAB_TYPESAFE_BY_RCU here, which allows requests to be immediately
freed, but delay freeing the underlying page by an RCU grace period.
With this scheme requests can be re-allocated, at the same time as they
are also being read by some lockless RCU lookup mechanism.

In the ctor case, which is only called for new slab objects(i.e allocate
new page and call the ctor for each object) it's safe to reset the
context/engine prior to calling into dma_fence_init, since we can be
certain that no one is doing an RCU lookup which might depend on peeking
at the engine/context, like in active_engine(), since the object can't
yet be externally visible.

In the recycled case(which might also be externally visible) the request
refcount always transitions from 0->1 after we set the context/engine
etc, which should ensure it's valid to dereference the engine for
example, when doing an RCU list-walk, so long as we can also increment
the refcount first. If the refcount is already zero, then the request is
considered complete/released.  If it's non-zero, then the request might
be in the process of being re-allocated, or potentially still in flight,
however after successfully incrementing the refcount, it's possible to
carefully inspect the request state, to determine if the request is
still what we were looking for. Note that all externally visible
requests returned to the cache must have zero refcount.

One possible fix then is to move dma_fence_init out from the request
ctor. Originally this was how it was done, but it was moved in:

commit 855e39e65cfc33a73724f1cc644ffc5754864a20
Author: Chris Wilson 
Date:   Mon Feb 3 09:41:48 2020 +0000

    drm/i915: Initialise basic fence before acquiring seqno

where it looks like intel_timeline_get_seqno() relied on some of the
rq->fence state, but that is no longer the case since:

commit 12ca695d2c1ed26b2dcbb528b42813bd0f216cfc
Author: Maarten Lankhorst 
Date:   Tue Mar 23 16:49:50 2021 +0100

    drm/i915: Do not share hwsp across contexts any more, v8.

intel_timeline_get_seqno() could also be cleaned up slightly by dropping
the request argument.

Moving dma_fence_init back out of the ctor, should ensure we have enough
of the request initialised in case of trace_dma_fence_init.
Functionally this should be the same, and is effectively what we were
already open coding before, except now we also assign the fence->lock
and fence->ops, but since these are invariant for recycled
requests(which might be externally visible), and will therefore already
hold the same value, it shouldn't matter.

An alternative fix, since we don't yet have a fully initialised request
when in the ctor, is just setting the context/engine as NULL, but this
does require adding some extra handling in get_driver_name etc.

v2(Daniel):
  - Try to make the commit message less confusing

Fixes: 855e39e65cfc ("drm/i915: Initialise basic fence before acquiring seqno")
Signed-off-by: Matthew Auld 
Cc: Michael Mason 
Cc: Daniel Vetter 
Reviewed-by: Daniel Vetter 
Link: https://patchwork.freedesktop.org/patch/msgid/20210921134202.3803151-1-matthew.auld@intel.com
(cherry picked from commit be988eaee1cb208c4445db46bc3ceaf75f586f0b)
Signed-off-by: Jani Nikula 
Signed-off-by: Sasha Levin

drm/amdgpu: correct initial cp_hqd_quantum for gfx9

2021-10-06T13:55:50+00:00

commit 9f52c25f59b504a29dda42d83ac1e24d2af535d4 upstream.

didn't read the value of mmCP_HQD_QUANTUM from correct
register offset

Signed-off-by: Hawking Zhang 
Reviewed-by: Le Ma 
Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

drm/amd/display: Pass PCI deviceid into DC

2021-10-06T13:55:50+00:00

commit d942856865c733ff60450de9691af796ad71d7bc upstream.

[why]
pci deviceid not passed to dal dc, without proper break,
dcn2.x falls into dcn3.x code path

[how]
pass in pci deviceid, and break once dal_version initialized.

Reviewed-by: Zhan Liu 
Acked-by: Anson Jacob 
Signed-off-by: Charlene Liu 
Tested-by: Daniel Wheeler 
Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

amd/display: downgrade validation failure log level

2021-09-30T08:11:06+00:00

[ Upstream commit 7bbee36d71502ab9a341505da89a017c7ae2e6b2 ]

In amdgpu_dm_atomic_check, dc_validate_global_state is called. On
failure this logs a warning to the kernel journal. However warnings
shouldn't be used for atomic test-only commit failures: user-space
might be perfoming a lot of atomic test-only commits to find the
best hardware configuration.

Downgrade the log to a regular DRM atomic message. While at it, use
the new device-aware logging infrastructure.

This fixes error messages in the kernel when running gamescope [1].

[1]: https://github.com/Plagman/gamescope/issues/245

Reviewed-by: Nicholas Kazlauskas 
Signed-off-by: Simon Ser 
Cc: Alex Deucher 
Cc: Harry Wentland 
Cc: Nicholas Kazlauskas 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin