linux-stable.git/drivers/gpu, branch v4.4.72

drm/nouveau/tmr: fully separate alarm execution/pending lists

2017-06-14T11:16:25+00:00

commit b4e382ca7586a63b6c1e5221ce0863ff867c2df6 upstream.

Reusing the list_head for both is a bad idea.  Callback execution is done
with the lock dropped so that alarms can be rescheduled from the callback,
which means that with some unfortunate timing, lists can get corrupted.

The execution list should not require its own locking, the single function
that uses it can only be called from a single context.

Signed-off-by: Ben Skeggs 
Signed-off-by: Greg Kroah-Hartman

drm/vmwgfx: Make sure backup_handle is always valid

2017-06-14T11:16:25+00:00

commit 07678eca2cf9c9a18584e546c2b2a0d0c9a3150c upstream.

When vmw_gb_surface_define_ioctl() is called with an existing buffer,
we end up returning an uninitialized variable in the backup_handle.

The fix is to first initialize backup_handle to 0 just to be sure, and
second, when a user-provided buffer is found, we will use the
req->buffer_handle as the backup_handle.

Reported-by: Murray McAllister 
Signed-off-by: Sinclair Yeh 
Reviewed-by: Deepak Rawat 
Signed-off-by: Greg Kroah-Hartman

drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl()

2017-06-14T11:16:25+00:00

commit ee9c4e681ec4f58e42a83cb0c22a0289ade1aacf upstream.

The 'req->mip_levels' parameter in vmw_gb_surface_define_ioctl() is
a user-controlled 'uint32_t' value which is used as a loop count limit.
This can lead to a kernel lockup and DoS. Add check for 'req->mip_levels'.

References:
https://bugzilla.redhat.com/show_bug.cgi?id=1437431

Signed-off-by: Vladis Dronov 
Reviewed-by: Sinclair Yeh 
Signed-off-by: Greg Kroah-Hartman

drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve()

2017-06-14T11:16:25+00:00

commit f0c62e9878024300319ba2438adc7b06c6b9c448 upstream.

If vmalloc() fails then we need to a bit of cleanup before returning.

Fixes: fb1d9738ca05 ("drm/vmwgfx: Add DRM driver for VMware Virtual GPU")
Signed-off-by: Dan Carpenter 
Reviewed-by: Sinclair Yeh 
Signed-off-by: Greg Kroah-Hartman

drm/msm: Expose our reservation object when exporting a dmabuf.

2017-06-14T11:16:23+00:00

commit 43523eba79bda8f5b4c27f8ffe20ea078d20113a upstream.

Without this, polling on the dma-buf (and presumably other devices
synchronizing against our rendering) would return immediately, even
while the BO was busy.

Signed-off-by: Eric Anholt 
Reviewed-by: Daniel Vetter 
Cc: Rob Clark 
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Rob Clark 
Signed-off-by: Rob Clark 
Signed-off-by: Greg Kroah-Hartman

drm/amdgpu/ci: disable mclk switching for high refresh rates (v2)

2017-06-14T11:16:21+00:00

commit 0a646f331db0eb9efc8d3a95a44872036d441d58 upstream.

Even if the vblank period would allow it, it still seems to
be problematic on some cards.

v2: fix logic inversion (Nils)

bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868

Acked-by: Christian König 
Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

drm/gma500/psb: Actually use VBT mode when it is found

2017-06-07T10:06:01+00:00

commit 82bc9a42cf854fdf63155759c0aa790bd1f361b0 upstream.

With LVDS we were incorrectly picking the pre-programmed mode instead of
the prefered mode provided by VBT. Make sure we pick the VBT mode if
one is provided. It is likely that the mode read-out code is still wrong
but this patch fixes the immediate problem on most machines.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78562
Signed-off-by: Patrik Jakobsson 
Link: http://patchwork.freedesktop.org/patch/msgid/20170418114332.12183-1-patrik.r.jakobsson@gmail.com
Signed-off-by: Greg Kroah-Hartman

drm/radeon: Unbreak HPD handling for r600+

2017-06-07T10:06:00+00:00

commit 3d18e33735a02b1a90aecf14410bf3edbfd4d3dc upstream.

We end up reading the interrupt register for HPD5, and then writing it
to HPD6 which on systems without anything using HPD5 results in
permanently disabling hotplug on one of the display outputs after the
first time we acknowledge a hotplug interrupt from the GPU.

This code is really bad. But for now, let's just fix this. I will
hopefully have a large patch series to refactor all of this soon.

Reviewed-by: Christian König 
Signed-off-by: Lyude 
Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

drm/radeon/ci: disable mclk switching for high refresh rates (v2)

2017-06-07T10:06:00+00:00

commit 58d7e3e427db1bd68f33025519a9468140280a75 upstream.

Even if the vblank period would allow it, it still seems to
be problematic on some cards.

v2: fix logic inversion (Nils)

bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868

Acked-by: Christian König 
Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

drm/edid: Add 10 bpc quirk for LGD 764 panel in HP zBook 17 G2

2017-05-25T12:30:17+00:00

commit e345da82bd6bdfa8492f80b3ce4370acfd868d95 upstream.

The builtin eDP panel in the HP zBook 17 G2 supports 10 bpc,
as advertised by the Laptops product specs and verified via
injecting a fixed edid + photometer measurements, but edid
reports unknown depth, so drivers fall back to 6 bpc.

Add a quirk to get the full 10 bpc.

Signed-off-by: Mario Kleiner 
Acked-by: Harry Wentland 
Signed-off-by: Daniel Vetter 
Link: http://patchwork.freedesktop.org/patch/msgid/1492787108-23959-1-git-send-email-mario.kleiner.de@gmail.com
Signed-off-by: Greg Kroah-Hartman