linux-stable.git/drivers/gpu, branch v4.4.32 Linux kernel stable tree drm/radeon: fix DP mode validation 2016-11-15T06:46:40+00:00 Alex Deucher alexander.deucher@amd.com 2016-05-11T20:16:53+00:00 2be0548e64f19ebf97f5f7f8dddaa5f4c9d05a8d commit ff0bd441bdfbfa09d05fdba9829a0401a46635c1 upstream. Switch the order of the loops to walk the rates on the top so we exhaust all DP 1.1 rate/lane combinations before trying DP 1.2 rate/lane combos. This avoids selecting rates that are supported by the monitor, but not the connector leading to valid modes getting rejected. bug: https://bugs.freedesktop.org/show_bug.cgi?id=95206 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ff0bd441bdfbfa09d05fdba9829a0401a46635c1 upstream.

Switch the order of the loops to walk the rates on the top
so we exhaust all DP 1.1 rate/lane combinations before trying
DP 1.2 rate/lane combos.

This avoids selecting rates that are supported by the monitor,
but not the connector leading to valid modes getting rejected.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=95206

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/radeon/dp: add back special handling for NUTMEG 2016-11-15T06:46:40+00:00 Alex Deucher alexander.deucher@amd.com 2016-03-04T00:26:24+00:00 ccc31f819918ee0c2681990b0366e920e374dfcd commit c8213a638f65bf487c10593c216525952cca3690 upstream. When I fixed the dp rate selection in: 092c96a8ab9d1bd60ada2ed385cc364ce084180e drm/radeon: fix dp link rate selection (v2) I accidently dropped the special handling for NUTMEG DP bridge chips. They require a fixed link rate. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Ken Moffat <zarniwhoop@ntlworld.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c8213a638f65bf487c10593c216525952cca3690 upstream.

When I fixed the dp rate selection in:
092c96a8ab9d1bd60ada2ed385cc364ce084180e
drm/radeon: fix dp link rate selection (v2)
I accidently dropped the special handling for NUTMEG
DP bridge chips.  They require a fixed link rate.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Ken Moffat <zarniwhoop@ntlworld.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/amdgpu: fix DP mode validation 2016-11-15T06:46:40+00:00 Alex Deucher alexander.deucher@amd.com 2016-05-11T20:21:03+00:00 227994b52c7355b6380885c86820fb3a2ac0e5c0 commit c47b9e0944e483309d66c807d650ac8b8ceafb57 upstream. Switch the order of the loops to walk the rates on the top so we exhaust all DP 1.1 rate/lane combinations before trying DP 1.2 rate/lane combos. This avoids selecting rates that are supported by the monitor, but not the connector leading to valid modes getting rejected. bug: https://bugs.freedesktop.org/show_bug.cgi?id=95206 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c47b9e0944e483309d66c807d650ac8b8ceafb57 upstream.

Switch the order of the loops to walk the rates on the top
so we exhaust all DP 1.1 rate/lane combinations before trying
DP 1.2 rate/lane combos.

This avoids selecting rates that are supported by the monitor,
but not the connector leading to valid modes getting rejected.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=95206

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/amdgpu/dp: add back special handling for NUTMEG 2016-11-15T06:46:40+00:00 Alex Deucher alexander.deucher@amd.com 2016-03-04T00:34:28+00:00 2e8cfc1fe9850281e0107610d4e1fc10276188f9 commit 02d27234759dc4fe14a880ec1e1dee108cb0b503 upstream. When I fixed the dp rate selection in: 3b73b168cffd9c392584d3f665021fa2190f8612 drm/amdgpu: fix dp link rate selection (v2) I accidently dropped the special handling for NUTMEG DP bridge chips. They require a fixed link rate. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 02d27234759dc4fe14a880ec1e1dee108cb0b503 upstream.

When I fixed the dp rate selection in:
3b73b168cffd9c392584d3f665021fa2190f8612
drm/amdgpu: fix dp link rate selection (v2)
I accidently dropped the special handling for NUTMEG
DP bridge chips.  They require a fixed link rate.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/exynos: fix error handling in exynos_drm_subdrv_open 2016-11-10T15:36:36+00:00 Arnd Bergmann arnd@arndb.de 2016-03-14T14:22:25+00:00 8a618bc7e5869fcd5c0e7c82bc4792ff81499623 commit 55c4b906aa2aec3fa66310ec03c6842e34a04b2a upstream. gcc-6 warns about a pointless loop in exynos_drm_subdrv_open: drivers/gpu/drm/exynos/exynos_drm_core.c: In function 'exynos_drm_subdrv_open': drivers/gpu/drm/exynos/exynos_drm_core.c:104:199: error: self-comparison always evaluates to false [-Werror=tautological-compare] list_for_each_entry_reverse(subdrv, &subdrv->list, list) { Here, the list_for_each_entry_reverse immediately terminates because the subdrv pointer is compared to itself as the loop end condition. If we were to take the current subdrv pointer as the start of the list (as we would do if list_for_each_entry_reverse() was not a macro), we would iterate backwards over the &exynos_drm_subdrv_list anchor, which would be even worse. Instead, we need to use list_for_each_entry_continue_reverse() to go back over each subdrv that was successfully opened until the first entry. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 55c4b906aa2aec3fa66310ec03c6842e34a04b2a upstream.

gcc-6 warns about a pointless loop in exynos_drm_subdrv_open:

drivers/gpu/drm/exynos/exynos_drm_core.c: In function 'exynos_drm_subdrv_open':
drivers/gpu/drm/exynos/exynos_drm_core.c:104:199: error: self-comparison always evaluates to false [-Werror=tautological-compare]
  list_for_each_entry_reverse(subdrv, &subdrv->list, list) {

Here, the list_for_each_entry_reverse immediately terminates because
the subdrv pointer is compared to itself as the loop end condition.

If we were to take the current subdrv pointer as the start of the
list (as we would do if list_for_each_entry_reverse() was not a macro),
we would iterate backwards over the &exynos_drm_subdrv_list anchor,
which would be even worse.

Instead, we need to use list_for_each_entry_continue_reverse()
to go back over each subdrv that was successfully opened until
the first entry.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/dp/mst: Check peer device type before attempting EDID read 2016-11-10T15:36:36+00:00 Ville Syrjälä ville.syrjala@linux.intel.com 2016-10-26T09:05:55+00:00 9702108e3def0fca8fe47949270a97e18f1e4e50 commit 4da5caa6a6f82cda3193bca855235b87debf78bd upstream. Only certain types of pdts have the DDC bus registered, so check for that before we attempt the EDID read. Othwewise we risk playing around with an i2c adapter that doesn't actually exist. Cc: Carlos Santa <carlos.santa@intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by: Carlos Santa <carlos.santa@intel.com> Tested-by: Kirill A. Shutemov <kirill@shutemov.name> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-5-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4da5caa6a6f82cda3193bca855235b87debf78bd upstream.

Only certain types of pdts have the DDC bus registered, so check for
that before we attempt the EDID read. Othwewise we risk playing around
with an i2c adapter that doesn't actually exist.

Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Carlos Santa <carlos.santa@intel.com>
Tested-by: Kirill A. Shutemov <kirill@shutemov.name>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-5-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/radeon: drop register readback in cayman_cp_int_cntl_setup 2016-11-10T15:36:36+00:00 Lucas Stach dev@lynxeye.de 2016-10-24T21:32:04+00:00 1262212d3b8e0e2f88f1276acebe4b921c43ac4a commit 537b4b462caa8bfb9726d9695b8e56e2d5e6b41e upstream. The read is taking a considerable amount of time (about 50us on this machine). The register does not ever hold anything other than the ring ID that is updated in this exact function, so there is no need for the read modify write cycle. This chops off a big chunk of the time spent in hardirq disabled context, as this function is called multiple times in the interrupt handler. With this change applied radeon won't show up in the list of the worst IRQ latency offenders anymore, where it was a regular before. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 537b4b462caa8bfb9726d9695b8e56e2d5e6b41e upstream.

The read is taking a considerable amount of time (about 50us on this
machine). The register does not ever hold anything other than the ring
ID that is updated in this exact function, so there is no need for
the read modify write cycle.

This chops off a big chunk of the time spent in hardirq disabled
context, as this function is called multiple times in the interrupt
handler. With this change applied radeon won't show up in the list
of the worst IRQ latency offenders anymore, where it was a regular
before.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/radeon/si_dpm: workaround for SI kickers 2016-11-10T15:36:36+00:00 Alex Deucher alexander.deucher@amd.com 2016-10-14T20:38:02+00:00 1734d4e1422148b8f9481719568bc5f2dd676077 commit 7dc86ef5ac91642dfc3eb93ee0f0458e702a343e upstream. Consolidate existing quirks. Fixes stability issues on some kickers. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7dc86ef5ac91642dfc3eb93ee0f0458e702a343e upstream.

Consolidate existing quirks. Fixes stability issues
on some kickers.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/radeon/si_dpm: Limit clocks on HD86xx part 2016-11-10T15:36:35+00:00 Tom St Denis tom.stdenis@amd.com 2016-10-13T16:38:07+00:00 231be2b99e4aaddd25c2b247f65d3c7c043c2738 commit fb9a5b0c1c9893db2e0d18544fd49e19d784a87d upstream. Limit clocks on a specific HD86xx part to avoid crashes (while awaiting an appropriate PP fix). Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fb9a5b0c1c9893db2e0d18544fd49e19d784a87d upstream.

Limit clocks on a specific HD86xx part to avoid
crashes (while awaiting an appropriate PP fix).

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "drm/radeon: fix DP link training issue with second 4K monitor" 2016-11-10T15:36:35+00:00 Michel Dänzer michel.daenzer@amd.com 2016-10-24T07:52:20+00:00 4b32256b2706f81cbf40c7bbe4ba65acfed7018e commit 9dc79965b21967caebde575f5f5d8bf1aa2c23ab upstream. This reverts commit 1a738347df2ee4977459a8776fe2c62196bdcb1b. It caused at least some Kaveri laptops to incorrectly report DisplayPort connectors as connected. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97857 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9dc79965b21967caebde575f5f5d8bf1aa2c23ab upstream.

This reverts commit 1a738347df2ee4977459a8776fe2c62196bdcb1b.

It caused at least some Kaveri laptops to incorrectly report DisplayPort
connectors as connected.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97857
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>