linux-stable.git/drivers/gpu, branch v4.4.166

drm/ast: Remove existing framebuffers before loading driver

2018-12-01T08:46:41+00:00

commit 5478ad10e7850ce3d8b7056db05ddfa3c9ddad9a upstream.

If vesafb attaches to the AST device, it configures the framebuffer memory
for uncached access by default. When ast.ko later tries to attach itself to
the device, it wants to use write-combining on the framebuffer memory, but
vesefb's existing configuration for uncached access takes precedence. This
results in reduced performance.

Removing the framebuffer's configuration before loding the AST driver fixes
the problem. Other DRM drivers already contain equivalent code.

Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1112963
Signed-off-by: Thomas Zimmermann 
Cc: 
Tested-by: Y.C. Chen 
Reviewed-by: Jean Delvare 
Tested-by: Jean Delvare 
Signed-off-by: Dave Airlie 
Signed-off-by: Greg Kroah-Hartman

drm/ast: fixed cursor may disappear sometimes

2018-12-01T08:46:34+00:00

commit 7989b9ee8bafe5cc625381dd0c3c4586de27ca26 upstream.

Signed-off-by: Y.C. Chen 
Cc: 
Reviewed-by: Dave Airlie 
Signed-off-by: Dave Airlie 
Signed-off-by: Greg Kroah-Hartman

drm/ast: change resolution may cause screen blurred

2018-12-01T08:46:34+00:00

commit 1a37bd823891568f8721989aed0615835632d81a upstream.

The value of pitches is not correct while calling mode_set.
The issue we found so far on following system:
- Debian8 with XFCE Desktop
- Ubuntu with KDE Desktop
- SUSE15 with KDE Desktop

Signed-off-by: Y.C. Chen 
Cc: 
Tested-by: Jean Delvare 
Reviewed-by: Jean Delvare 
Signed-off-by: Dave Airlie 
Signed-off-by: Greg Kroah-Hartman

drm/i915/hdmi: Add HDMI 2.0 audio clock recovery N values

2018-11-21T08:27:45+00:00

commit 6503493145cba4413ecd3d4d153faeef4a1e9b85 upstream.

HDMI 2.0 594Mhz modes were incorrectly selecting 25.200Mhz Automatic N value
mode instead of HDMI specification values.

V2: Fix 88.2 Hz N value

Cc: Jani Nikula 
Cc: stable@vger.kernel.org
Signed-off-by: Clint Taylor 
Signed-off-by: Jani Nikula 
Link: https://patchwork.freedesktop.org/patch/msgid/1540493521-1746-2-git-send-email-clinton.a.taylor@intel.com
(cherry picked from commit 5a400aa3c562c4a726b4da286e63c96db905ade1)
Signed-off-by: Joonas Lahtinen 
Signed-off-by: Greg Kroah-Hartman

drm/dp_mst: Check if primary mstb is null

2018-11-21T08:27:44+00:00

commit 23d8003907d094f77cf959228e2248d6db819fa7 upstream.

Unfortunately drm_dp_get_mst_branch_device which is called from both
drm_dp_mst_handle_down_rep and drm_dp_mst_handle_up_rep seem to rely
on that mgr->mst_primary is not NULL, which seem to be wrong as it can be
cleared with simultaneous mode set, if probing fails or in other case.
mgr->lock mutex doesn't protect against that as it might just get
assigned to NULL right before, not simultaneously.

There are currently bugs 107738, 108616 bugs which crash in
drm_dp_get_mst_branch_device, caused by this issue.

v2: Refactored the code, as it was nicely noticed.
    Fixed Bugzilla bug numbers(second was 108616, but not 108816)
    and added links.

[changed title and added stable cc]
Signed-off-by: Lyude Paul 
Signed-off-by: Stanislav Lisovskiy 
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108616
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107738
Link: https://patchwork.freedesktop.org/patch/msgid/20181109090012.24438-1-stanislav.lisovskiy@intel.com
Signed-off-by: Greg Kroah-Hartman

drm/rockchip: Allow driver to be shutdown on reboot/kexec

2018-11-21T08:27:44+00:00

commit 7f3ef5dedb146e3d5063b6845781ad1bb59b92b5 upstream.

Leaving the DRM driver enabled on reboot or kexec has the annoying
effect of leaving the display generating transactions whilst the
IOMMU has been shut down.

In turn, the IOMMU driver (which shares its interrupt line with
the VOP) starts warning either on shutdown or when entering the
secondary kernel in the kexec case (nothing is expected on that
front).

A cheap way of ensuring that things are nicely shut down is to
register a shutdown callback in the platform driver.

Signed-off-by: Marc Zyngier 
Tested-by: Vicente Bergas 
Signed-off-by: Heiko Stuebner 
Link: https://patchwork.freedesktop.org/patch/msgid/20180805124807.18169-1-marc.zyngier@arm.com
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

drm/omap: fix memory barrier bug in DMM driver

2018-11-21T08:27:38+00:00

[ Upstream commit 538f66ba204944470a653a4cccc5f8befdf97c22 ]

A DMM timeout "timed out waiting for done" has been observed on DRA7
devices. The timeout happens rarely, and only when the system is under
heavy load.

Debugging showed that the timeout can be made to happen much more
frequently by optimizing the DMM driver, so that there's almost no code
between writing the last DMM descriptors to RAM, and writing to DMM
register which starts the DMM transaction.

The current theory is that a wmb() does not properly ensure that the
data written to RAM is observable by all the components in the system.

This DMM timeout has caused interesting (and rare) bugs as the error
handling was not functioning properly (the error handling has been fixed
in previous commits):

 * If a DMM timeout happened when a GEM buffer was being pinned for
   display on the screen, a timeout error would be shown, but the driver
   would continue programming DSS HW with broken buffer, leading to
   SYNCLOST floods and possible crashes.

 * If a DMM timeout happened when other user (say, video decoder) was
   pinning a GEM buffer, a timeout would be shown but if the user
   handled the error properly, no other issues followed.

 * If a DMM timeout happened when a GEM buffer was being released, the
   driver does not even notice the error, leading to crashes or hang
   later.

This patch adds wmb() and readl() calls after the last bit is written to
RAM, which should ensure that the execution proceeds only after the data
is actually in RAM, and thus observable by DMM.

The read-back should not be needed. Further study is required to understand
if DMM is somehow special case and read-back is ok, or if DRA7's memory
barriers do not work correctly.

Signed-off-by: Tomi Valkeinen 
Signed-off-by: Peter Ujfalusi 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

gpu: host1x: fix error return code in host1x_probe()

2018-11-10T15:41:39+00:00

[ Upstream commit 7b2c63de20080c18d0de35b292ad61fc9bc8328e ]

platform_get_irq() returns an error code, but the host1x driver
ignores it and always returns -ENXIO. This is not correct and,
prevents -EPROBE_DEFER from being propagated properly.

Notice that platform_get_irq() no longer returns 0 on error:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af

Print and propagate the return value of platform_get_irq on failure.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva 
Signed-off-by: Thierry Reding 
Signed-off-by: Sasha Levin

drm/nouveau/fbcon: fix oops without fbdev emulation

2018-11-10T15:41:37+00:00

[ Upstream commit 4813766325374af6ed0b66879ba6a0bbb05c83b6 ]

This is similar to an earlier commit 52dfcc5ccfbb ("drm/nouveau: fix for
disabled fbdev emulation"), but protects all occurrences of helper.fbdev
in the source.

I see oops in nouveau_fbcon_accel_save_disable() called from
nouveau_fbcon_set_suspend_work() on Linux 3.13 when
CONFIG_DRM_FBDEV_EMULATION option is disabled.

Signed-off-by: Pavel Roskin 
Reviewed-by: Daniel Vetter 
Signed-off-by: Ben Skeggs 
Signed-off-by: Sasha Levin

drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7

2018-10-20T07:52:33+00:00

[ Upstream commit caaa4c8a6be2a275bd14f2369ee364978ff74704 ]

A wrong register bit was examinated for checking SDMA status so it reports
false failures. This typo only appears on gfx_v7. gfx_v8 checks the correct
bit.

Acked-by: Alex Deucher 
Signed-off-by: Amber Lin 
Reviewed-by: Felix Kuehling 
Signed-off-by: Felix Kuehling 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman