linux-stable.git/drivers/gpu, branch v4.20.4

drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclock

2019-01-22T20:10:01+00:00

commit 66a8d5bfb518f9f12d47e1d2dce1732279f9451e upstream.

Strict requirement of pixclock to be zero breaks support of SDL 1.2
which contains hardcoded table of supported video modes with non-zero
pixclock values[1].

To better understand which pixclock values are considered valid and how
driver should handle these values, I briefly examined few existing fbdev
drivers and documentation in Documentation/fb/. And it looks like there
are no strict rules on that and actual behaviour varies:

	* some drivers treat (pixclock == 0) as "use defaults" (uvesafb.c);
	* some treat (pixclock == 0) as invalid value which leads to
	  -EINVAL (clps711x-fb.c);
	* some pass converted pixclock value to hardware (uvesafb.c);
	* some are trying to find nearest value from predefined table
          (vga16fb.c, video_gx.c).

Given this, I believe that it should be safe to just ignore this value if
changing is not supported. It seems that any portable fbdev application
which was not written only for one specific device working under one
specific kernel version should not rely on any particular behaviour of
pixclock anyway.

However, while enabling SDL1 applications to work out of the box when
there is no /etc/fb.modes with valid settings, this change affects the
video mode choosing logic in SDL. Depending on current screen
resolution, contents of /etc/fb.modes and resolution requested by
application, this may lead to user-visible difference (not always):
image will be displayed in a right way, but it will be aligned to the
left instead of center. There is no "right behaviour" here as well, as
emulated fbdev, opposing to old fbdev drivers, simply ignores any
requsts of video mode changes with resolutions smaller than current.

The easiest way to reproduce this problem is to install sdl-sopwith[2],
remove /etc/fb.modes file if it exists, and then try to run sopwith
from console without X. At least in Fedora 29, sopwith may be simply
installed from standard repositories.

[1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c, vesa_timings
[2] http://sdl-sopwith.sourceforge.net/

Signed-off-by: Ivan Mironov 
Cc: stable@vger.kernel.org
Fixes: 79e539453b34e ("DRM: i915: add mode setting support")
Fixes: 771fe6b912fca ("drm/radeon: introduce kernel modesetting for radeon hardware")
Fixes: 785b93ef8c309 ("drm/kms: move driver specific fb common code to helper functions (v2)")
Signed-off-by: Daniel Vetter 
Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-3-mironov.ivan@gmail.com
Signed-off-by: Greg Kroah-Hartman

gpu/drm: Fix lock held when returning to user space.

2019-01-22T20:09:57+00:00

commit 4089e272ac61603931beb024d4d640de2cb390e0 upstream.

We need to call drm_modeset_acquire_fini() when drm_atomic_state_alloc()
failed or call drm_modeset_acquire_init() after drm_atomic_state_alloc()
succeeded.

Signed-off-by: Tetsuo Handa 
Reported-by: syzbot 
Signed-off-by: Daniel Vetter 
Link: https://patchwork.freedesktop.org/patch/msgid/1547115571-21219-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman

drm/vkms: Fix plane duplicate_state

2019-01-22T20:09:57+00:00

commit 7cdf33ab02e01300e7e6289acbac9cd8759f8712 upstream.

We need to handle allocation failures and bail out. While at it, tune
the allocation failures down to debug level.

syzbot injected an allocation failure and then hit this WARN_ON.

Reported-by: syzbot+eb6e5365f23c02517dda@syzkaller.appspotmail.com
Signed-off-by: Daniel Vetter 
Cc: Haneen Mohammed 
Cc: Sean Paul 
Cc: Daniel Vetter 
Cc: Rodrigo Siqueira 
Cc: Gustavo Padovan 
Reviewed-by: Eric Anholt 
Link: https://patchwork.freedesktop.org/patch/msgid/20181128101033.4840-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman

drm/rockchip: add missing of_node_put

2019-01-22T20:09:53+00:00

commit a17ce9960b3628b9f546c454741a1cad551d5695 upstream.

The device node iterators perform an of_node_get on each iteration, so a
jump out of the loop requires an of_node_put.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// 
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@

 for_each_child_of_node(root, child) {
   ... when != of_node_put(child)
       when != e = child
+  of_node_put(child);
?  break;
   ...
}
... when != child
// 

Fixes: 1f0f01515172 ("drm/rockchip: Add support for Rockchip Soc RGB output interface")
Cc: stable@vger.kernel.org
Signed-off-by: Julia Lawall 
[added fixes and cc-stable]
Signed-off-by: Heiko Stuebner 
Link: https://patchwork.freedesktop.org/patch/msgid/1547369264-24831-4-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Greg Kroah-Hartman

drm/i915/gvt: Fix mmap range check

2019-01-22T20:09:52+00:00

commit 51b00d8509dc69c98740da2ad07308b630d3eb7d upstream.

This is to fix missed mmap range check on vGPU bar2 region
and only allow to map vGPU allocated GMADDR range, which means
user space should support sparse mmap to get proper offset for
mmap vGPU aperture. And this takes care of actual pgoff in mmap
request as original code always does from beginning of vGPU
aperture.

Fixes: 659643f7d814 ("drm/i915/gvt/kvmgt: add vfio/mdev support to KVMGT")
Cc: "Monroy, Rodrigo Axel" 
Cc: "Orrala Contreras, Alfredo" 
Cc: stable@vger.kernel.org # v4.10+
Reviewed-by: Hang Yuan 
Signed-off-by: Zhenyu Wang 
Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: Don't fail resume process if resuming atomic state fails

2019-01-16T21:03:25+00:00

commit 2d1af6a11cb9d88e0e3dd10258904c437fe1b315 upstream.

This is an ugly one unfortunately. Currently, all DRM drivers supporting
atomic modesetting will save the state that userspace had set before
suspending, then attempt to restore that state on resume. This probably
worked very well at one point, like many other things, until DP MST came
into the picture. While it's easy to restore state on normal display
connectors that were disconnected during suspend regardless of their
state post-resume, this can't really be done with MST because of the
fact that setting up a downstream sink requires performing sideband
transactions between the source and the MST hub, sending out the ACT
packets, etc.

Because of this, there isn't really a guarantee that we can restore the
atomic state we had before suspend once we've resumed. This sucks pretty
bad, but so far I haven't run into any compositors that this actually
causes serious issues with. Most compositors will notice the hotplug we
send afterwards, and then reprobe state.

Since nouveau and i915 also don't fail the suspend/resume process due to
failing to restore the atomic state, let's make amdgpu match this
behavior. Better to resume the GPU properly, then to stop the process
half way because of a potentially unavoidable atomic commit failure.

Eventually, we'll have a real fix for this problem on the DRM level. But
we've got some more important low-hanging fruit to deal with first.

Signed-off-by: Lyude Paul 
Reviewed-by: Harry Wentland 
Cc: Jerry Zuo 
Cc:  # v4.15+
Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-3-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: Don't ignore rc from drm_dp_mst_topology_mgr_resume()

2019-01-16T21:03:25+00:00

commit fe7553bef8d676d1d8b40666868b33ec39b9df5d upstream.

drm_dp_mst_topology_mgr_resume() returns whether or not it managed to
find the topology in question after a suspend resume cycle, and the
driver is supposed to check this value and disable MST accordingly if
it's gone-in addition to sending a hotplug in order to notify userspace
that something changed during suspend.

Currently, amdgpu just makes the mistake of ignoring the return code
from drm_dp_mst_topology_mgr_resume() which means that if a topology was
removed in suspend, amdgpu never notices and assumes it's still
connected which leads to all sorts of problems.

So, fix this by actually checking the rc from
drm_dp_mst_topology_mgr_resume(). Also, reformat the rest of the
function while we're at it to fix the over-indenting.

Signed-off-by: Lyude Paul 
Reviewed-by: Harry Wentland 
Cc: Jerry Zuo 
Cc:  # v4.15+
Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-2-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman

drm/i915: Unwind failure on pinning the gen7 ppgtt

2019-01-16T21:03:25+00:00

commit 280d479b310298dfeb1d6f9a1617eca37beb6ce4 upstream.

If we fail to pin the ggtt vma slot for the ppgtt page tables, we need
to unwind the locals before reporting the error. Or else on subsequent
attempts to bind the page tables into the ggtt, we will already believe
that the vma has been pinned and continue on blithely. If something else
should happen to be at that location, choas ensues.

Fixes: a2bbf7148342 ("drm/i915/gtt: Only keep gen6 page directories pinned while active")
Signed-off-by: Chris Wilson 
Cc: Joonas Lahtinen 
Cc: Mika Kuoppala 
Cc: Matthew Auld 
Cc:  # v4.19+
Reviewed-by: Matthew Auld 
Link: https://patchwork.freedesktop.org/patch/msgid/20181222030623.21710-1-chris@chris-wilson.co.uk
(cherry picked from commit d4de753526f4d99f541f1b6ed1d963005c09700c)
Signed-off-by: Jani Nikula 
Signed-off-by: Greg Kroah-Hartman

drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2

2019-01-16T21:03:25+00:00

commit 62d85b3bf9d978ed4b6b2aeef5cf0ccf1423906e upstream.

SDL 1.2 sets all fields related to the pixel format to zero in some
cases[1]. Prior to commit db05c48197759 ("drm: fb-helper: Reject all
pixel format changing requests"), there was an unintentional workaround
for this that existed for more than a decade. First in device-specific DRM
drivers, then here in drm_fb_helper.c.

Previous code containing this workaround just ignores pixel format fields
from userspace code. Not a good thing either, as this way, driver may
silently use pixel format different from what client actually requested,
and this in turn will lead to displaying garbage on the screen. I think
that returning EINVAL to userspace in this particular case is the right
option, so I decided to left code from problematic commit untouched
instead of just reverting it entirely.

Here is the steps required to reproduce this problem exactly:
	1) Compile fceux[2] with SDL 1.2.15 and without GTK or OpenGL
	   support. SDL should be compiled with fbdev support (which is
	   on by default).
	2) Create /etc/fb.modes with following contents (values seems
	   not used, and just required to trigger problematic code in
	   SDL):

		mode "test"
		    geometry 1 1 1 1 1
		    timings 1 1 1 1 1 1 1
		endmode

	3) Create ~/.fceux/fceux.cfg with following contents:

		SDL.Hotkeys.Quit = 27
		SDL.DoubleBuffering = 1

	4) Ensure that screen resolution is at least 1280x960 (e.g.
	   append "video=Virtual-1:1280x960-32" to the kernel cmdline
	   for qemu/QXL).

	5) Try to run fceux on VT with some ROM file[3]:

		# ./fceux color_test.nes

[1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c,
    FB_SetVideoMode()
[2] http://www.fceux.com
[3] Example ROM: https://github.com/bokuweb/rustynes/blob/master/roms/color_test.nes

Reported-by: saahriktu 
Suggested-by: saahriktu 
Cc: stable@vger.kernel.org
Fixes: db05c48197759 ("drm: fb-helper: Reject all pixel format changing requests")
Signed-off-by: Ivan Mironov 
[danvet: Delete misleading comment.]
Signed-off-by: Daniel Vetter 
Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com
Signed-off-by: Greg Kroah-Hartman

drm/amd/display: Fix MST dp_blank REG_WAIT timeout

2019-01-16T21:03:25+00:00

commit 8c9d90eebd23b6d40ddf4ce5df5ca2b932336a06 upstream.

Need to blank stream before deallocate MST payload.

[drm:generic_reg_wait [amdgpu]] *ERROR* REG_WAIT timeout 10us * 3000 tries - dce110_stream_encoder_dp_blank line:944
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2201 at /var/lib/dkms/amdgpu/18.50-690240/build/amd/amdgpu/../display/dc/dc_helper.c:249 generic_reg_wait+0xe7/0x160 [amdgpu]
Call Trace:
 dce110_stream_encoder_dp_blank+0x11c/0x180 [amdgpu]
 core_link_disable_stream+0x40/0x230 [amdgpu]
 ? generic_reg_update_ex+0xdb/0x130 [amdgpu]
 dce110_reset_hw_ctx_wrap+0xb7/0x1f0 [amdgpu]
 dce110_apply_ctx_to_hw+0x30/0x430 [amdgpu]
 ? dce110_apply_ctx_for_surface+0x206/0x260 [amdgpu]
 dc_commit_state+0x2ba/0x4d0 [amdgpu]
 amdgpu_dm_atomic_commit_tail+0x297/0xd70 [amdgpu]
 ? amdgpu_bo_pin_restricted+0x58/0x260 [amdgpu]
 ? wait_for_completion_timeout+0x1f/0x120
 ? wait_for_completion_interruptible+0x1c/0x160
 commit_tail+0x3d/0x60 [drm_kms_helper]
 drm_atomic_helper_commit+0xf6/0x100 [drm_kms_helper]
 drm_atomic_connector_commit_dpms+0xe5/0xf0 [drm]
 drm_mode_obj_set_property_ioctl+0x14f/0x250 [drm]
 drm_mode_connector_property_set_ioctl+0x2e/0x40 [drm]
 drm_ioctl+0x1e0/0x430 [drm]
 ? drm_mode_connector_set_obj_prop+0x70/0x70 [drm]
 ? ep_read_events_proc+0xb0/0xb0
 ? ep_scan_ready_list.constprop.18+0x1e6/0x1f0
 ? timerqueue_add+0x52/0x80
 amdgpu_drm_ioctl+0x49/0x80 [amdgpu]
 do_vfs_ioctl+0x90/0x5f0
 SyS_ioctl+0x74/0x80
 do_syscall_64+0x74/0x140
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2
---[ end trace 3ed7b77a97d60f72 ]---

Signed-off-by: Jerry (Fangzhi) Zuo 
Reviewed-by: Hersen Wu 
Acked-by: Harry Wentland 
Acked-by: Alex Deucher 
Tested-by: Lyude Paul 
Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman