linux-stable.git/drivers/gpu, branch v4.20.3

drm/amdgpu: Don't fail resume process if resuming atomic state fails

2019-01-16T21:03:25+00:00

commit 2d1af6a11cb9d88e0e3dd10258904c437fe1b315 upstream.

This is an ugly one unfortunately. Currently, all DRM drivers supporting
atomic modesetting will save the state that userspace had set before
suspending, then attempt to restore that state on resume. This probably
worked very well at one point, like many other things, until DP MST came
into the picture. While it's easy to restore state on normal display
connectors that were disconnected during suspend regardless of their
state post-resume, this can't really be done with MST because of the
fact that setting up a downstream sink requires performing sideband
transactions between the source and the MST hub, sending out the ACT
packets, etc.

Because of this, there isn't really a guarantee that we can restore the
atomic state we had before suspend once we've resumed. This sucks pretty
bad, but so far I haven't run into any compositors that this actually
causes serious issues with. Most compositors will notice the hotplug we
send afterwards, and then reprobe state.

Since nouveau and i915 also don't fail the suspend/resume process due to
failing to restore the atomic state, let's make amdgpu match this
behavior. Better to resume the GPU properly, then to stop the process
half way because of a potentially unavoidable atomic commit failure.

Eventually, we'll have a real fix for this problem on the DRM level. But
we've got some more important low-hanging fruit to deal with first.

Signed-off-by: Lyude Paul 
Reviewed-by: Harry Wentland 
Cc: Jerry Zuo 
Cc:  # v4.15+
Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-3-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: Don't ignore rc from drm_dp_mst_topology_mgr_resume()

2019-01-16T21:03:25+00:00

commit fe7553bef8d676d1d8b40666868b33ec39b9df5d upstream.

drm_dp_mst_topology_mgr_resume() returns whether or not it managed to
find the topology in question after a suspend resume cycle, and the
driver is supposed to check this value and disable MST accordingly if
it's gone-in addition to sending a hotplug in order to notify userspace
that something changed during suspend.

Currently, amdgpu just makes the mistake of ignoring the return code
from drm_dp_mst_topology_mgr_resume() which means that if a topology was
removed in suspend, amdgpu never notices and assumes it's still
connected which leads to all sorts of problems.

So, fix this by actually checking the rc from
drm_dp_mst_topology_mgr_resume(). Also, reformat the rest of the
function while we're at it to fix the over-indenting.

Signed-off-by: Lyude Paul 
Reviewed-by: Harry Wentland 
Cc: Jerry Zuo 
Cc:  # v4.15+
Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-2-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman

drm/i915: Unwind failure on pinning the gen7 ppgtt

2019-01-16T21:03:25+00:00

commit 280d479b310298dfeb1d6f9a1617eca37beb6ce4 upstream.

If we fail to pin the ggtt vma slot for the ppgtt page tables, we need
to unwind the locals before reporting the error. Or else on subsequent
attempts to bind the page tables into the ggtt, we will already believe
that the vma has been pinned and continue on blithely. If something else
should happen to be at that location, choas ensues.

Fixes: a2bbf7148342 ("drm/i915/gtt: Only keep gen6 page directories pinned while active")
Signed-off-by: Chris Wilson 
Cc: Joonas Lahtinen 
Cc: Mika Kuoppala 
Cc: Matthew Auld 
Cc:  # v4.19+
Reviewed-by: Matthew Auld 
Link: https://patchwork.freedesktop.org/patch/msgid/20181222030623.21710-1-chris@chris-wilson.co.uk
(cherry picked from commit d4de753526f4d99f541f1b6ed1d963005c09700c)
Signed-off-by: Jani Nikula 
Signed-off-by: Greg Kroah-Hartman

drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2

2019-01-16T21:03:25+00:00

commit 62d85b3bf9d978ed4b6b2aeef5cf0ccf1423906e upstream.

SDL 1.2 sets all fields related to the pixel format to zero in some
cases[1]. Prior to commit db05c48197759 ("drm: fb-helper: Reject all
pixel format changing requests"), there was an unintentional workaround
for this that existed for more than a decade. First in device-specific DRM
drivers, then here in drm_fb_helper.c.

Previous code containing this workaround just ignores pixel format fields
from userspace code. Not a good thing either, as this way, driver may
silently use pixel format different from what client actually requested,
and this in turn will lead to displaying garbage on the screen. I think
that returning EINVAL to userspace in this particular case is the right
option, so I decided to left code from problematic commit untouched
instead of just reverting it entirely.

Here is the steps required to reproduce this problem exactly:
	1) Compile fceux[2] with SDL 1.2.15 and without GTK or OpenGL
	   support. SDL should be compiled with fbdev support (which is
	   on by default).
	2) Create /etc/fb.modes with following contents (values seems
	   not used, and just required to trigger problematic code in
	   SDL):

		mode "test"
		    geometry 1 1 1 1 1
		    timings 1 1 1 1 1 1 1
		endmode

	3) Create ~/.fceux/fceux.cfg with following contents:

		SDL.Hotkeys.Quit = 27
		SDL.DoubleBuffering = 1

	4) Ensure that screen resolution is at least 1280x960 (e.g.
	   append "video=Virtual-1:1280x960-32" to the kernel cmdline
	   for qemu/QXL).

	5) Try to run fceux on VT with some ROM file[3]:

		# ./fceux color_test.nes

[1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c,
    FB_SetVideoMode()
[2] http://www.fceux.com
[3] Example ROM: https://github.com/bokuweb/rustynes/blob/master/roms/color_test.nes

Reported-by: saahriktu 
Suggested-by: saahriktu 
Cc: stable@vger.kernel.org
Fixes: db05c48197759 ("drm: fb-helper: Reject all pixel format changing requests")
Signed-off-by: Ivan Mironov 
[danvet: Delete misleading comment.]
Signed-off-by: Daniel Vetter 
Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com
Signed-off-by: Greg Kroah-Hartman

drm/amd/display: Fix MST dp_blank REG_WAIT timeout

2019-01-16T21:03:25+00:00

commit 8c9d90eebd23b6d40ddf4ce5df5ca2b932336a06 upstream.

Need to blank stream before deallocate MST payload.

[drm:generic_reg_wait [amdgpu]] *ERROR* REG_WAIT timeout 10us * 3000 tries - dce110_stream_encoder_dp_blank line:944
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2201 at /var/lib/dkms/amdgpu/18.50-690240/build/amd/amdgpu/../display/dc/dc_helper.c:249 generic_reg_wait+0xe7/0x160 [amdgpu]
Call Trace:
 dce110_stream_encoder_dp_blank+0x11c/0x180 [amdgpu]
 core_link_disable_stream+0x40/0x230 [amdgpu]
 ? generic_reg_update_ex+0xdb/0x130 [amdgpu]
 dce110_reset_hw_ctx_wrap+0xb7/0x1f0 [amdgpu]
 dce110_apply_ctx_to_hw+0x30/0x430 [amdgpu]
 ? dce110_apply_ctx_for_surface+0x206/0x260 [amdgpu]
 dc_commit_state+0x2ba/0x4d0 [amdgpu]
 amdgpu_dm_atomic_commit_tail+0x297/0xd70 [amdgpu]
 ? amdgpu_bo_pin_restricted+0x58/0x260 [amdgpu]
 ? wait_for_completion_timeout+0x1f/0x120
 ? wait_for_completion_interruptible+0x1c/0x160
 commit_tail+0x3d/0x60 [drm_kms_helper]
 drm_atomic_helper_commit+0xf6/0x100 [drm_kms_helper]
 drm_atomic_connector_commit_dpms+0xe5/0xf0 [drm]
 drm_mode_obj_set_property_ioctl+0x14f/0x250 [drm]
 drm_mode_connector_property_set_ioctl+0x2e/0x40 [drm]
 drm_ioctl+0x1e0/0x430 [drm]
 ? drm_mode_connector_set_obj_prop+0x70/0x70 [drm]
 ? ep_read_events_proc+0xb0/0xb0
 ? ep_scan_ready_list.constprop.18+0x1e6/0x1f0
 ? timerqueue_add+0x52/0x80
 amdgpu_drm_ioctl+0x49/0x80 [amdgpu]
 do_vfs_ioctl+0x90/0x5f0
 SyS_ioctl+0x74/0x80
 do_syscall_64+0x74/0x140
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2
---[ end trace 3ed7b77a97d60f72 ]---

Signed-off-by: Jerry (Fangzhi) Zuo 
Reviewed-by: Hersen Wu 
Acked-by: Harry Wentland 
Acked-by: Alex Deucher 
Tested-by: Lyude Paul 
Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: Add new VegaM pci id

2019-01-16T21:03:24+00:00

commit f6653a0e0877572c87f6dab5351e7bd6b6b7100c upstream.

Add a new pci id.

Reviewed-by: Leo Liu 
Signed-off-by: Alex Deucher 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

drm/rockchip: psr: do not dereference encoder before it is null checked.

2019-01-13T08:24:10+00:00

commit 4eda776c3cefcb1f01b2d85bd8753f67606282b5 upstream.

'encoder' is dereferenced before it is null sanity checked, hence we
potentially have a null pointer dereference bug. Instead, initialise
drm_drv from encoder->dev->dev_private after we are sure 'encoder' is
not null.

Fixes: 5182c1a556d7f ("drm/rockchip: add an common abstracted PSR driver")
Cc: stable@vger.kernel.org
Signed-off-by: Enric Balletbo i Serra 
Signed-off-by: Heiko Stuebner 
Link: https://patchwork.freedesktop.org/patch/msgid/20181013105654.11827-1-enric.balletbo@collabora.com
Signed-off-by: Greg Kroah-Hartman

drm/vc4: Set ->is_yuv to false when num_planes == 1

2019-01-13T08:24:09+00:00

commit 2b02a05bdc3a62d36e0d0b015351897109e25991 upstream.

When vc4_plane_state is duplicated ->is_yuv is left assigned to its
previous value, and we never set it back to false when switching to
a non-YUV format.

Fix that by setting ->is_yuv to false in the 'num_planes == 1' branch
of the vc4_plane_setup_clipping_and_scaling() function.

Fixes: fc04023fafecf ("drm/vc4: Add support for YUV planes.")
Cc: 
Signed-off-by: Boris Brezillon 
Reviewed-by: Eric Anholt 
Link: https://patchwork.freedesktop.org/patch/msgid/20181009132446.21960-1-boris.brezillon@bootlin.com
Signed-off-by: Greg Kroah-Hartman

drm/nouveau/drm/nouveau: Check rc from drm_dp_mst_topology_mgr_resume()

2019-01-13T08:24:09+00:00

commit b89fdf7ae8500feae1100d8b283176a44d31d698 upstream.

We need to actually make sure we check this on resume since otherwise we
won't know whether or not the topology is still there once we've
resumed, which will cause us to still think the topology is connected
even after it's been removed if the removal happens mid-suspend.

Signed-off-by: Lyude Paul 
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs 
Signed-off-by: Ben Skeggs 
Signed-off-by: Greg Kroah-Hartman

DRM: UDL: get rid of useless vblank initialization

2019-01-09T16:45:55+00:00

commit 32e932e37e6b6e13b66add307192c7ddd40a781d upstream.

UDL doesn't support vblank functionality so we don't need to
initialize vblank here (we are able to send page flip
completion events even without vblank initialization)

Moreover current drm_vblank_init call with num_crtcs > 0 causes
sending DRM_EVENT_FLIP_COMPLETE event with zero timestamp every
time. This breaks userspace apps (for example weston) which
relies on timestamp value.

Cc: stable@vger.kernel.org
Signed-off-by: Eugeniy Paltsev 
Signed-off-by: Daniel Vetter 
Link: https://patchwork.freedesktop.org/patch/msgid/20180928144126.21598-1-Eugeniy.Paltsev@synopsys.com
Signed-off-by: Greg Kroah-Hartman