linux-stable.git/drivers/gpu, branch v4.19.5

drm/amd/amdgpu/dm: Fix dm_dp_create_fake_mst_encoder()

2018-11-27T15:13:05+00:00

[ Upstream commit 63237f8748bdf46dccf79ef8f98f05e9fe799162 ]

[why]
Removing connector reusage from DM to match the rest of the tree ended
up revealing an issue that was surprisingly subtle. The original amdgpu
code for DC that was submitted appears to have left a chunk in
dm_dp_create_fake_mst_encoder() that tries to find a "master encoder",
the likes of which isn't actually used or stored anywhere. It does so at
the wrong time as well by trying to access parts of the drm_connector
from the encoder init before it's actually been initialized. This
results in a NULL pointer deref on MST hotplugs:

[  160.696613] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[  160.697234] PGD 0 P4D 0
[  160.697814] Oops: 0010 [#1] SMP PTI
[  160.698430] CPU: 2 PID: 64 Comm: kworker/2:1 Kdump: loaded Tainted: G           O      4.19.0Lyude-Test+ #2
[  160.699020] Hardware name: HP HP ZBook 15 G4/8275, BIOS P70 Ver. 01.22 05/17/2018
[  160.699672] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper]
[  160.700322] RIP: 0010:          (null)
[  160.700920] Code: Bad RIP value.
[  160.701541] RSP: 0018:ffffc9000029fc78 EFLAGS: 00010206
[  160.702183] RAX: 0000000000000000 RBX: ffff8804440ed468 RCX: ffff8804440e9158
[  160.702778] RDX: 0000000000000000 RSI: ffff8804556c5700 RDI: ffff8804440ed000
[  160.703408] RBP: ffff880458e21800 R08: 0000000000000002 R09: 000000005fca0a25
[  160.704002] R10: ffff88045a077a3d R11: ffff88045a077a3c R12: ffff8804440ed000
[  160.704614] R13: ffff880458e21800 R14: ffff8804440e9000 R15: ffff8804440e9000
[  160.705260] FS:  0000000000000000(0000) GS:ffff88045f280000(0000) knlGS:0000000000000000
[  160.705854] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  160.706478] CR2: ffffffffffffffd6 CR3: 000000000200a001 CR4: 00000000003606e0
[  160.707124] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  160.707724] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  160.708372] Call Trace:
[  160.708998]  ? dm_dp_add_mst_connector+0xed/0x1d0 [amdgpu]
[  160.709625]  ? drm_dp_add_port+0x2fa/0x470 [drm_kms_helper]
[  160.710284]  ? wake_up_q+0x54/0x70
[  160.710877]  ? __mutex_unlock_slowpath.isra.18+0xb3/0x110
[  160.711512]  ? drm_dp_dpcd_access+0xe7/0x110 [drm_kms_helper]
[  160.712161]  ? drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper]
[  160.712762]  ? drm_dp_check_and_send_link_address+0xa3/0xd0 [drm_kms_helper]
[  160.713408]  ? drm_dp_mst_link_probe_work+0x4b/0x80 [drm_kms_helper]
[  160.714013]  ? process_one_work+0x1a1/0x3a0
[  160.714667]  ? worker_thread+0x30/0x380
[  160.715326]  ? wq_update_unbound_numa+0x10/0x10
[  160.715939]  ? kthread+0x112/0x130
[  160.716591]  ? kthread_create_worker_on_cpu+0x70/0x70
[  160.717262]  ? ret_from_fork+0x35/0x40
[  160.717886] Modules linked in: amdgpu(O) vfat fat snd_hda_codec_generic joydev i915 chash gpu_sched ttm i2c_algo_bit drm_kms_helper snd_hda_codec_hdmi hp_wmi syscopyarea iTCO_wdt sysfillrect sparse_keymap sysimgblt fb_sys_fops snd_hda_intel usbhid wmi_bmof drm snd_hda_codec btusb snd_hda_core intel_rapl btrtl x86_pkg_temp_thermal btbcm btintel coretemp snd_pcm crc32_pclmul bluetooth psmouse snd_timer snd pcspkr i2c_i801 mei_me i2c_core soundcore mei tpm_tis wmi tpm_tis_core hp_accel ecdh_generic lis3lv02d tpm video rfkill acpi_pad input_polldev hp_wireless pcc_cpufreq crc32c_intel serio_raw tg3 xhci_pci xhci_hcd [last unloaded: amdgpu]
[  160.720141] CR2: 0000000000000000

Somehow the connector reusage DM was using for MST connectors managed to
paper over this issue entirely; hence why this was never caught until
now.

[how]
Since this code isn't used anywhere and seems useless anyway, we can
just drop it entirely. This appears to fix the issue on my HP ZBook with
an AMD WX4150.

Signed-off-by: Lyude Paul 
Reviewed-by: Harry Wentland 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

drm/amd/display: Drop reusing drm connector for MST

2018-11-27T15:13:05+00:00

[ Upstream commit 0e6613e46fed29316f33acf86e1d1568288638b5 ]

[why]
It is not safe to keep existing connector while entire topology
has been removed. Could lead potential impact to uapi.
Entirely unregister all the connectors on the topology,
and use a new set of connectors when the topology is plugged back
on.

[How]
Remove the drm connector entirely each time when the
corresponding MST topology is gone.
When hotunplug a connector (e.g., DP2)
1. Remove connector from userspace.
2. Drop it's reference.
When hotplug back on:
1. Detect new topology, and create new connectors.
2. Notify userspace with sysfs hotplug event.
3. Reprobe new connectors, and reassign CRTC from old (e.g., DP2)
to new (e.g., DP3) connector.

Signed-off-by: Jerry (Fangzhi) Zuo 
Reviewed-by: Harry Wentland 
Reviewed-by: Lyude Paul 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

drm/amd/display: Stop leaking planes

2018-11-27T15:13:05+00:00

[ Upstream commit 02680efbb10be0d2c867fe722ae23d588f6bebef ]

[Why]
drm_plane_cleanup does not free the plane.

[How]
Call drm_primary_helper_destroy which will also free the plane.

Signed-off-by: Harry Wentland 
Acked-by: Alex Deucher 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

Revert "drm/exynos/decon5433: implement frame counter"

2018-11-27T15:13:04+00:00

[ Upstream commit 6ca469e22a30992b4478d2ab88737c70667c1e00 ]

This reverts commit 0586feba322e1de05075700eb4b835c8b683e62b

This patch makes it to need get_vblank_counter callback in crtc
to get frame counter from decon driver.

However, drm_dev->max_vblank_count is a member unique to
vendor's DRM driver but in case of ARM DRM, some CRTC devices
don't provide the frame counter value. As a result, this patch
made extension and clone mode not working.

Instead of this patch, we may need separated max_vblank_count
which belongs to each CRTC device, or need to implement frame
counter emulation for them who don't support HW frame counter.

Signed-off-by: Inki Dae 
Signed-off-by: Sasha Levin

drm/edid: Add 6 bpc quirk for BOE panel.

2018-11-27T15:12:59+00:00

[ Upstream commit 922dceff8dc1fb4dafc9af78139ba65671408103 ]

BOE panel (ID: 0x0771) that reports "DFP 1.x compliant TMDS".
But it's 6bpc panel only instead of 8 bpc.

Add panel ID to edid quirk list and set 6 bpc as default to
work around this issue.

Cc: Jani Nikula 
Cc: Maarten Lankhorst 
Cc: Gustavo Padovan 
Cc: Cooper Chiou 
Signed-off-by: Lee, Shawn C >
Signed-off-by: Daniel Vetter 
Link: https://patchwork.freedesktop.org/patch/msgid/1540792173-7288-1-git-send-email-shawn.c.lee@intel.com
Signed-off-by: Sasha Levin

drm/i915: Replace some PAGE_SIZE with I915_GTT_PAGE_SIZE

2018-11-27T15:12:58+00:00

commit f6e35cda66146106cfeb85ed65696e0f8e793fee upstream.

Use I915_GTT_PAGE_SIZE when talking about GTT pages rather than
physical pages.

There are some PAGE_SHIFTs left though. Not sure if we want to
introduce I915_GTT_PAGE_SHIFT or what?

Cc: Chris Wilson 
Suggested-by: Chris Wilson  # at least some of it :)
Signed-off-by: Ville Syrjälä 
Link: https://patchwork.freedesktop.org/patch/msgid/20180913150405.706-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson 
Signed-off-by: Greg Kroah-Hartman

drm/i915: Fix hpd handling for pins with two encoders

2018-11-21T08:19:28+00:00

commit 44a7276b30c3c15f2b7790a5729640597fb6a1df upstream.

In my haste to remove irq_port[] I accidentally changed the
way we deal with hpd pins that are shared by multiple encoders
(DP and HDMI for pre-DDI platforms). Previously we would only
handle such pins via ->hpd_pulse(), but now we queue up the
hotplug work for the HDMI encoder directly. Worse yet, we now
count each hpd twice and this increment the hpd storm count
twice as fast. This can lead to spurious storms being detected.

Go back to the old way of doing things, ie. delegate to
->hpd_pulse() for any pin which has an encoder with that hook
implemented. I don't really like the idea of adding irq_port[]
back so let's loop through the encoders first to check if we
have an encoder with ->hpd_pulse() for the pin, and then go
through all the pins and decided on the correct course of action
based on the earlier findings.

I have occasionally toyed with the idea of unifying the pre-DDI
HDMI and DP encoders into a single encoder as well. Besides the
hotplug processing it would have the other benefit of preventing
userspace from trying to enable both encoders at the same time.
That is simply illegal as they share the same clock/data pins.
We have some testcases that will attempt that and thus fail on
many older machines. But for now let's stick to fixing just the
hotplug code.

Cc: stable@vger.kernel.org # 4.19+
Cc: Lyude Paul 
Cc: Rodrigo Vivi 
Fixes: b6ca3eee18ba ("drm/i915: Nuke dev_priv->irq_port[]")
Signed-off-by: Ville Syrjälä 
Link: https://patchwork.freedesktop.org/patch/msgid/20181108200424.28371-1-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul 
(cherry picked from commit 5a3aeca97af1b6b3498d59a7fd4e8bb95814c108)
Signed-off-by: Joonas Lahtinen 
Signed-off-by: Greg Kroah-Hartman

drm/i915: Fix NULL deref when re-enabling HPD IRQs on systems with MST

2018-11-21T08:19:28+00:00

commit 541ff7e96c13cd5d67f6021d233f8e1c3df49278 upstream.

Turns out that if you trigger an HPD storm on a system that has an MST
topology connected to it, you'll end up causing the kernel to eventually
hit a NULL deref:

[  332.339041] BUG: unable to handle kernel NULL pointer dereference at 00000000000000ec
[  332.340906] PGD 0 P4D 0
[  332.342750] Oops: 0000 [#1] SMP PTI
[  332.344579] CPU: 2 PID: 25 Comm: kworker/2:0 Kdump: loaded Tainted: G           O      4.18.0-rc3short-hpd-storm+ #2
[  332.346453] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET71WW (1.35 ) 09/14/2018
[  332.348361] Workqueue: events intel_hpd_irq_storm_reenable_work [i915]
[  332.350301] RIP: 0010:intel_hpd_irq_storm_reenable_work.cold.3+0x2f/0x86 [i915]
[  332.352213] Code: 00 00 ba e8 00 00 00 48 c7 c6 c0 aa 5f a0 48 c7 c7 d0 73 62 a0 4c 89 c1 4c 89 04 24 e8 7f f5 af e0 4c 8b 04 24 44 89 f8 29 e8 <41> 39 80 ec 00 00 00 0f 85 43 13 fc ff 41 0f b6 86 b8 04 00 00 41
[  332.354286] RSP: 0018:ffffc90000147e48 EFLAGS: 00010006
[  332.356344] RAX: 0000000000000005 RBX: ffff8802c226c9d4 RCX: 0000000000000006
[  332.358404] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff88032dc95570
[  332.360466] RBP: 0000000000000005 R08: 0000000000000000 R09: ffff88031b3dc840
[  332.362528] R10: 0000000000000000 R11: 000000031a069602 R12: ffff8802c226ca20
[  332.364575] R13: ffff8802c2268000 R14: ffff880310661000 R15: 000000000000000a
[  332.366615] FS:  0000000000000000(0000) GS:ffff88032dc80000(0000) knlGS:0000000000000000
[  332.368658] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  332.370690] CR2: 00000000000000ec CR3: 000000000200a003 CR4: 00000000003606e0
[  332.372724] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  332.374773] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  332.376798] Call Trace:
[  332.378809]  process_one_work+0x1a1/0x350
[  332.380806]  worker_thread+0x30/0x380
[  332.382777]  ? wq_update_unbound_numa+0x10/0x10
[  332.384772]  kthread+0x112/0x130
[  332.386740]  ? kthread_create_worker_on_cpu+0x70/0x70
[  332.388706]  ret_from_fork+0x35/0x40
[  332.390651] Modules linked in: i915(O) vfat fat joydev btusb btrtl btbcm btintel bluetooth ecdh_generic iTCO_wdt wmi_bmof i2c_algo_bit drm_kms_helper intel_rapl syscopyarea sysfillrect x86_pkg_temp_thermal sysimgblt coretemp fb_sys_fops crc32_pclmul drm psmouse pcspkr mei_me mei i2c_i801 lpc_ich mfd_core i2c_core tpm_tis tpm_tis_core thinkpad_acpi wmi tpm rfkill video crc32c_intel serio_raw ehci_pci xhci_pci ehci_hcd xhci_hcd [last unloaded: i915]
[  332.394963] CR2: 00000000000000ec

This appears to be due to the fact that with an MST topology, not all
intel_connector structs will have ->encoder set. So, fix this by
skipping connectors without encoders in
intel_hpd_irq_storm_reenable_work().

For those wondering, this bug was found on accident while simulating HPD
storms using a Chamelium connected to a ThinkPad T450s (Broadwell).

Changes since v1:
- Check intel_connector->mst_port instead of intel_connector->encoder

Signed-off-by: Lyude Paul 
Reviewed-by: Ville Syrjälä 
Cc: stable@vger.kernel.org
Cc: Rodrigo Vivi 
Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-3-lyude@redhat.com
(cherry picked from commit fee61deecb1d850bf34f682a6a452e5ee51b7572)
Signed-off-by: Joonas Lahtinen 
Signed-off-by: Greg Kroah-Hartman

drm/i915: Fix possible race in intel_dp_add_mst_connector()

2018-11-21T08:19:28+00:00

commit 7c4512300cfa5a4dcc8c1c52ae61e3fa4bd11a39 upstream.

This hasn't caused any issues yet that I'm aware of, but as Ville
Syrjälä pointed out - we need to make sure that
intel_connector->mst_port is set before initializing MST connectors,
since in theory we could potentially check intel_connector->mst_port in
i915_hpd_poll_init_work() after registering the connector but before
having written it's value.

Signed-off-by: Lyude Paul 
Reviewed-by: Ville Syrjälä 
Cc: Rodrigo Vivi 
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181106213017.14563-2-lyude@redhat.com
(cherry picked from commit 66a5ab1034be801630816d1fa6cfc30db1a2f0b0)
Signed-off-by: Joonas Lahtinen 
Signed-off-by: Greg Kroah-Hartman

drm/i915/execlists: Force write serialisation into context image vs execution

2018-11-21T08:19:28+00:00

commit 0a823e8fd4fd67726697854578f3584ee3a49b1d upstream.

Ensure that the writes into the context image are completed prior to the
register mmio to trigger execution. Although previously we were assured
by the SDM that all writes are flushed before an uncached memory
transaction (our mmio write to submit the context to HW for execution),
we have empirical evidence to believe that this is not actually the
case.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108656
References: https://bugs.freedesktop.org/show_bug.cgi?id=108315
References: https://bugs.freedesktop.org/show_bug.cgi?id=106887
Signed-off-by: Chris Wilson 
Cc: Mika Kuoppala 
Cc: Tvrtko Ursulin 
Acked-by: Mika Kuoppala 
Link: https://patchwork.freedesktop.org/patch/msgid/20181108081740.25615-1-chris@chris-wilson.co.uk
Cc: stable@vger.kernel.org
(cherry picked from commit 987abd5c62f92ee4970b45aa077f47949974e615)
Signed-off-by: Joonas Lahtinen 
Signed-off-by: Greg Kroah-Hartman