linux-stable.git/drivers/gpu, branch v4.19.48 Linux kernel stable tree drm/sun4i: dsi: Enforce boundaries on the start delay 2019-05-31T13:46:35+00:00 Maxime Ripard maxime.ripard@bootlin.com 2019-02-11T14:41:24+00:00 1a686177acdec679c90200c0f5db04155a1c4493 [ Upstream commit efa31801203ac2f5c6a82a28cb991c7163ee0f1d ] The Allwinner BSP makes sure that we don't end up with a null start delay or with a delay larger than vtotal. The former condition is likely to happen now with the reworked start delay, so make sure we enforce the same boundaries. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/c9889cf5f7a3d101ef380905900b45a182596f56.1549896081.git-series.maxime.ripard@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit efa31801203ac2f5c6a82a28cb991c7163ee0f1d ]

The Allwinner BSP makes sure that we don't end up with a null start delay
or with a delay larger than vtotal.

The former condition is likely to happen now with the reworked start delay,
so make sure we enforce the same boundaries.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c9889cf5f7a3d101ef380905900b45a182596f56.1549896081.git-series.maxime.ripard@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/sun4i: dsi: Change the start delay calculation 2019-05-31T13:46:34+00:00 Maxime Ripard maxime.ripard@bootlin.com 2019-02-11T14:41:23+00:00 476e87eb7f78b344c2312c74cc289b1843deadd8 [ Upstream commit da676c6aa6413d59ab0a80c97bbc273025e640b2 ] The current calculation for the video start delay in the current DSI driver is that it is the total vertical size, minus the front porch and sync length, plus 1. This equals to the active vertical size plus the back porch plus 1. That 1 is coming in the Allwinner BSP from an variable that is set to 1. However, if we look at the Allwinner BSP more closely, and especially in the "legacy" code for the display (in drivers/video/sunxi/legacy/), we can see that this variable is actually computed from the porches and the sync minus 10, clamped between 8 and 100. This fixes the start delay symptom we've seen on some panels (vblank timeouts with vertical white stripes at the bottom of the panel). Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/6e5f72e68f47ca0223877464bf12f0c3f3978de8.1549896081.git-series.maxime.ripard@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit da676c6aa6413d59ab0a80c97bbc273025e640b2 ]

The current calculation for the video start delay in the current DSI driver
is that it is the total vertical size, minus the front porch and sync length,
plus 1. This equals to the active vertical size plus the back porch plus 1.

That 1 is coming in the Allwinner BSP from an variable that is set to 1.
However, if we look at the Allwinner BSP more closely, and especially in
the "legacy" code for the display (in drivers/video/sunxi/legacy/), we can
see that this variable is actually computed from the porches and the sync
minus 10, clamped between 8 and 100.

This fixes the start delay symptom we've seen on some panels (vblank
timeouts with vertical white stripes at the bottom of the panel).

Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e5f72e68f47ca0223877464bf12f0c3f3978de8.1549896081.git-series.maxime.ripard@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm: Wake up next in drm_read() chain if we are forced to putback the event 2019-05-31T13:46:34+00:00 Chris Wilson chris@chris-wilson.co.uk 2017-08-04T08:23:28+00:00 00734a9e7329acc48e575f697ee4118998c1dac0 [ Upstream commit 60b801999c48b6c1dd04e653a38e2e613664264e ] After an event is sent, we try to copy it into the user buffer of the first waiter in drm_read() and if the user buffer doesn't have enough room we put it back onto the list. However, we didn't wake up any subsequent waiter, so that event may sit on the list until either a new vblank event is sent or a new waiter appears. Rare, but in the worst case may lead to a stuck process. Testcase: igt/drm_read/short-buffer-wakeup Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170804082328.17173-1-chris@chris-wilson.co.uk Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 60b801999c48b6c1dd04e653a38e2e613664264e ]

After an event is sent, we try to copy it into the user buffer of the
first waiter in drm_read() and if the user buffer doesn't have enough
room we put it back onto the list. However, we didn't wake up any
subsequent waiter, so that event may sit on the list until either a new
vblank event is sent or a new waiter appears. Rare, but in the worst
case may lead to a stuck process.

Testcase: igt/drm_read/short-buffer-wakeup
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170804082328.17173-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/drv: Hold ref on parent device during drm_device lifetime 2019-05-31T13:46:34+00:00 Noralf Trønnes noralf@tronnes.org 2019-02-25T14:42:26+00:00 d6dea92a4862db146612ad9cd8bd1f452ef258f4 [ Upstream commit 56be6503aab2bc3a30beae408071b9be5e1bae51 ] This makes it safe to access drm_device->dev after the parent device has been removed/unplugged. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-2-noralf@tronnes.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 56be6503aab2bc3a30beae408071b9be5e1bae51 ]

This makes it safe to access drm_device->dev after the parent device has
been removed/unplugged.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-2-noralf@tronnes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/v3d: Handle errors from IRQ setup. 2019-05-31T13:46:34+00:00 Eric Anholt eric@anholt.net 2019-03-08T17:43:35+00:00 473bc1af7a22ccfa0b282c3575b59f0a5b0c41b8 [ Upstream commit fc22771547e7e8a63679f0218e943d72b107de65 ] Noted in review by Dave Emett for V3D 4.2 support. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190308174336.7866-1-eric@anholt.net Reviewed-by: Dave Emett <david.emett@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fc22771547e7e8a63679f0218e943d72b107de65 ]

Noted in review by Dave Emett for V3D 4.2 support.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308174336.7866-1-eric@anholt.net
Reviewed-by: Dave Emett <david.emett@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/omap: dsi: Fix PM for display blank with paired dss_pll calls 2019-05-31T13:46:34+00:00 Tony Lindgren tony@atomide.com 2019-02-07T15:45:16+00:00 676aec9b8f11ca6acaf22555d9001b5262dab871 [ Upstream commit fe4ed1b457943113ee1138c939fbdeede4af6cf3 ] Currently dsi_display_init_dsi() calls dss_pll_enable() but it is not paired with dss_pll_disable() in dsi_display_uninit_dsi(). This leaves the DSS clocks enabled when the display is blanked wasting about extra 5mW of power while idle. The clock that is left on by not calling dss_pll_disable() is DSS_CLKCTRL bit 10 OPTFCLKEN_SYS_CLK that is the source clock for DSI PLL. We can fix this issue by by making the current dsi_pll_uninit() into dsi_pll_disable(). This way we can just call dss_pll_disable() from dsi_display_uninit_dsi() and the code becomes a bit easier to follow. However, we need to also consider that DSI PLL can be muxed for DVI too as pointed out by Tomi Valkeinen <tomi.valkeinen@ti.com>. In the DVI case, we want to unconditionally disable the clocks. To get around this issue, we separate out the DSI lane handling from dsi_pll_enable() and dsi_pll_disable() as suggested by Tomi in an earlier experimental patch. So we must only toggle the DSI regulator based on the vdds_dsi_enabled flag from dsi_display_init_dsi() and dsi_display_uninit_dsi(). We need to make these two changes together to avoid breaking things for DVI when fixing the DSI clock handling. And this all causes a slight renumbering of the error path for dsi_display_init_dsi(). Suggested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit fe4ed1b457943113ee1138c939fbdeede4af6cf3 ]

Currently dsi_display_init_dsi() calls dss_pll_enable() but it is not
paired with dss_pll_disable() in dsi_display_uninit_dsi(). This leaves
the DSS clocks enabled when the display is blanked wasting about extra
5mW of power while idle.

The clock that is left on by not calling dss_pll_disable() is
DSS_CLKCTRL bit 10 OPTFCLKEN_SYS_CLK that is the source clock for
DSI PLL.

We can fix this issue by by making the current dsi_pll_uninit() into
dsi_pll_disable(). This way we can just call dss_pll_disable() from
dsi_display_uninit_dsi() and the code becomes a bit easier to follow.

However, we need to also consider that DSI PLL can be muxed for DVI too
as pointed out by Tomi Valkeinen <tomi.valkeinen@ti.com>. In the DVI
case, we want to unconditionally disable the clocks. To get around this
issue, we separate out the DSI lane handling from dsi_pll_enable() and
dsi_pll_disable() as suggested by Tomi in an earlier experimental patch.

So we must only toggle the DSI regulator based on the vdds_dsi_enabled
flag from dsi_display_init_dsi() and dsi_display_uninit_dsi().

We need to make these two changes together to avoid breaking things
for DVI when fixing the DSI clock handling. And this all causes a
slight renumbering of the error path for dsi_display_init_dsi().

Suggested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/amd/display: Set stream->mode_changed when connectors change 2019-05-31T13:46:32+00:00 Nicholas Kazlauskas nicholas.kazlauskas@amd.com 2019-02-08T18:21:05+00:00 62e79f4c6bc05c32be43e2532fe12c082429af27 [ Upstream commit b9952f93cd2cf5fca82b06a8179c0f5f7b769e83 ] [Why] The kms_plane@plane-position-covered-pipe-*-planes subtests can produce a sequence of atomic commits such that neither active_changed nor mode_changed but connectors_changed. When this happens we remove the old stream from the context and add a new stream but the new stream doesn't have mode_changed=true set. This incorrect programming sequence causes CRC mismatches to occur in the test. The stream->mode_changed value should be set whenever a new stream is created. [How] A new stream is created whenever drm_atomic_crtc_needs_modeset is true. We previously covered the active_changed and mode_changed conditions for the CRTC but connectors_changed is also checked within drm_atomic_crtc_needs_modeset. So just use drm_atomic_crtc_needs_modeset directly to determine the mode_changed flag. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit b9952f93cd2cf5fca82b06a8179c0f5f7b769e83 ]

[Why]
The kms_plane@plane-position-covered-pipe-*-planes subtests can produce
a sequence of atomic commits such that neither active_changed nor
mode_changed but connectors_changed.

When this happens we remove the old stream from the context and add
a new stream but the new stream doesn't have mode_changed=true set.

This incorrect programming sequence causes CRC mismatches to occur in
the test.

The stream->mode_changed value should be set whenever a new stream
is created.

[How]
A new stream is created whenever drm_atomic_crtc_needs_modeset is true.
We previously covered the active_changed and mode_changed conditions
for the CRTC but connectors_changed is also checked within
drm_atomic_crtc_needs_modeset.

So just use drm_atomic_crtc_needs_modeset directly to determine the
mode_changed flag.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/amd/display: Fix Divide by 0 in memory calculations 2019-05-31T13:46:32+00:00 Murton Liu murton.liu@amd.com 2019-02-15T20:05:43+00:00 fc5293ab6c48710eed5df3b40e808e3a3c560e2d [ Upstream commit 59979bf8be1784ebfc44215031c6c88ca22ae65d ] Check if we get any values equal to 0, and set to 1 if so. Signed-off-by: Murton Liu <murton.liu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 59979bf8be1784ebfc44215031c6c88ca22ae65d ]

Check if we get any values equal to 0, and set to 1 if so.

Signed-off-by: Murton Liu <murton.liu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tinydrm/mipi-dbi: Use dma-safe buffers for all SPI transfers 2019-05-31T13:46:32+00:00 Noralf Trønnes noralf@tronnes.org 2019-02-22T12:43:29+00:00 b6bc2024942303fa44c7d0d75a485e9872b0130a [ Upstream commit a89bfc5d9a0732d84b4de311e27133daa0586316 ] Buffers passed to spi_sync() must be dma-safe even for tiny buffers since some SPI controllers use DMA for all transfers. Example splat with CONFIG_DMA_API_DEBUG enabled: [ 23.750467] DMA-API: dw_dmac_pci 0000:00:15.0: device driver maps memory from stack [probable addr=000000001e49185d] [ 23.750529] WARNING: CPU: 1 PID: 1296 at kernel/dma/debug.c:1161 check_for_stack+0xb7/0x190 [ 23.750533] Modules linked in: mmc_block(+) spi_pxa2xx_platform(+) pwm_lpss_pci pwm_lpss spi_pxa2xx_pci sdhci_pci cqhci intel_mrfld_pwrbtn extcon_intel_mrfld sdhci intel_mrfld_adc led_class mmc_core ili9341 mipi_dbi tinydrm backlight ti_ads7950 industrialio_triggered_buffer kfifo_buf intel_soc_pmic_mrfld hci_uart btbcm [ 23.750599] CPU: 1 PID: 1296 Comm: modprobe Not tainted 5.0.0-rc7+ #236 [ 23.750605] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 [ 23.750620] RIP: 0010:check_for_stack+0xb7/0x190 [ 23.750630] Code: 8b 6d 50 4d 85 ed 75 04 4c 8b 6d 10 48 89 ef e8 2f 8b 44 00 48 89 c6 4a 8d 0c 23 4c 89 ea 48 c7 c7 88 d0 82 b4 e8 40 7c f9 ff <0f> 0b 8b 05 79 00 4b 01 85 c0 74 07 5b 5d 41 5c 41 5d c3 8b 05 54 [ 23.750637] RSP: 0000:ffff97bbc0292fa0 EFLAGS: 00010286 [ 23.750646] RAX: 0000000000000000 RBX: ffff97bbc0290000 RCX: 0000000000000006 [ 23.750652] RDX: 0000000000000007 RSI: 0000000000000002 RDI: ffff94b33e115450 [ 23.750658] RBP: ffff94b33c8578b0 R08: 0000000000000002 R09: 00000000000201c0 [ 23.750664] R10: 00000006ecb0ccc6 R11: 0000000000034f38 R12: 000000000000316c [ 23.750670] R13: ffff94b33c84b250 R14: ffff94b33dedd5a0 R15: 0000000000000001 [ 23.750679] FS: 0000000000000000(0000) GS:ffff94b33e100000(0063) knlGS:00000000f7faf690 [ 23.750686] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 23.750691] CR2: 00000000f7f54faf CR3: 000000000722c000 CR4: 00000000001006e0 [ 23.750696] Call Trace: [ 23.750713] debug_dma_map_sg+0x100/0x340 [ 23.750727] ? dma_direct_map_sg+0x3b/0xb0 [ 23.750739] spi_map_buf+0x25a/0x300 [ 23.750751] __spi_pump_messages+0x2a4/0x680 [ 23.750762] __spi_sync+0x1dd/0x1f0 [ 23.750773] spi_sync+0x26/0x40 [ 23.750790] mipi_dbi_typec3_command_read+0x14d/0x240 [mipi_dbi] [ 23.750802] ? spi_finalize_current_transfer+0x10/0x10 [ 23.750821] mipi_dbi_typec3_command+0x1bc/0x1d0 [mipi_dbi] Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190222124329.23046-1-noralf@tronnes.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit a89bfc5d9a0732d84b4de311e27133daa0586316 ]

Buffers passed to spi_sync() must be dma-safe even for tiny buffers since
some SPI controllers use DMA for all transfers.

Example splat with CONFIG_DMA_API_DEBUG enabled:

[   23.750467] DMA-API: dw_dmac_pci 0000:00:15.0: device driver maps memory from stack [probable addr=000000001e49185d]
[   23.750529] WARNING: CPU: 1 PID: 1296 at kernel/dma/debug.c:1161 check_for_stack+0xb7/0x190
[   23.750533] Modules linked in: mmc_block(+) spi_pxa2xx_platform(+) pwm_lpss_pci pwm_lpss spi_pxa2xx_pci sdhci_pci cqhci intel_mrfld_pwrbtn extcon_intel_mrfld sdhci intel_mrfld_adc led_class mmc_core ili9341 mipi_dbi tinydrm backlight ti_ads7950 industrialio_triggered_buffer kfifo_buf intel_soc_pmic_mrfld hci_uart btbcm
[   23.750599] CPU: 1 PID: 1296 Comm: modprobe Not tainted 5.0.0-rc7+ #236
[   23.750605] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
[   23.750620] RIP: 0010:check_for_stack+0xb7/0x190
[   23.750630] Code: 8b 6d 50 4d 85 ed 75 04 4c 8b 6d 10 48 89 ef e8 2f 8b 44 00 48 89 c6 4a 8d 0c 23 4c 89 ea 48 c7 c7 88 d0 82 b4 e8 40 7c f9 ff <0f> 0b 8b 05 79 00 4b 01 85 c0 74 07 5b 5d 41 5c 41 5d c3 8b 05 54
[   23.750637] RSP: 0000:ffff97bbc0292fa0 EFLAGS: 00010286
[   23.750646] RAX: 0000000000000000 RBX: ffff97bbc0290000 RCX: 0000000000000006
[   23.750652] RDX: 0000000000000007 RSI: 0000000000000002 RDI: ffff94b33e115450
[   23.750658] RBP: ffff94b33c8578b0 R08: 0000000000000002 R09: 00000000000201c0
[   23.750664] R10: 00000006ecb0ccc6 R11: 0000000000034f38 R12: 000000000000316c
[   23.750670] R13: ffff94b33c84b250 R14: ffff94b33dedd5a0 R15: 0000000000000001
[   23.750679] FS:  0000000000000000(0000) GS:ffff94b33e100000(0063) knlGS:00000000f7faf690
[   23.750686] CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
[   23.750691] CR2: 00000000f7f54faf CR3: 000000000722c000 CR4: 00000000001006e0
[   23.750696] Call Trace:
[   23.750713]  debug_dma_map_sg+0x100/0x340
[   23.750727]  ? dma_direct_map_sg+0x3b/0xb0
[   23.750739]  spi_map_buf+0x25a/0x300
[   23.750751]  __spi_pump_messages+0x2a4/0x680
[   23.750762]  __spi_sync+0x1dd/0x1f0
[   23.750773]  spi_sync+0x26/0x40
[   23.750790]  mipi_dbi_typec3_command_read+0x14d/0x240 [mipi_dbi]
[   23.750802]  ? spi_finalize_current_transfer+0x10/0x10
[   23.750821]  mipi_dbi_typec3_command+0x1bc/0x1d0 [mipi_dbi]

Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190222124329.23046-1-noralf@tronnes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm/amd/display: fix releasing planes when exiting odm 2019-05-31T13:46:31+00:00 Dmytro Laktyushkin Dmytro.Laktyushkin@amd.com 2019-03-07T18:26:13+00:00 70611b1b81c4ec8ce99d3c00107e89697ec1f495 [ Upstream commit bc2193992b00488f5734613ac95b78ef2d2803ab ] Releasing planes should not release the 2nd odm pipe right away, this change leaves us with 2 pipes with null planes and same stream when planes are released during odm. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit bc2193992b00488f5734613ac95b78ef2d2803ab ]

Releasing planes should not release the 2nd odm pipe right away,
this change leaves us with 2 pipes with null planes and same stream
when planes are released during odm.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>