linux-stable.git/drivers/gpu, branch v4.19.166

drm/dp_aux_dev: check aux_dev before use in drm_dp_aux_dev_get_by_minor()

2020-12-30T10:26:13+00:00

commit 73b62cdb93b68d7e2c1d373c6a411bc00c53e702 upstream.

I observed this when unplugging a DP monitor whilst a computer is asleep
and then waking it up. This left DP chardev nodes still being present on
the filesystem and accessing these device nodes caused an oops because
drm_dp_aux_dev_get_by_minor() assumes a device exists if it is opened.
This can also be reproduced by creating a device node with mknod(1) and
issuing an open(2)

[166164.933198] BUG: kernel NULL pointer dereference, address: 0000000000000018
[166164.933202] #PF: supervisor read access in kernel mode
[166164.933204] #PF: error_code(0x0000) - not-present page
[166164.933205] PGD 0 P4D 0
[166164.933208] Oops: 0000 [#1] PREEMPT SMP NOPTI
[166164.933211] CPU: 4 PID: 99071 Comm: fwupd Tainted: G        W
5.8.0-rc6+ #1
[166164.933213] Hardware name: LENOVO 20RD002VUS/20RD002VUS, BIOS R16ET25W
(1.11 ) 04/21/2020
[166164.933232] RIP: 0010:drm_dp_aux_dev_get_by_minor+0x29/0x70
[drm_kms_helper]
[166164.933234] Code: 00 0f 1f 44 00 00 55 48 89 e5 41 54 41 89 fc 48 c7
c7 60 01 a4 c0 e8 26 ab 30 d7 44 89 e6 48 c7 c7 80 01 a4 c0 e8 47 94 d6 d6
<8b> 50 18 49 89 c4 48 8d 78 18 85 d2 74 33 8d 4a 01 89 d0 f0 0f b1
[166164.933236] RSP: 0018:ffffb7d7c41cbbf0 EFLAGS: 00010246
[166164.933237] RAX: 0000000000000000 RBX: ffff8a90001fe900 RCX: 0000000000000000
[166164.933238] RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffffffc0a40180
[166164.933239] RBP: ffffb7d7c41cbbf8 R08: 0000000000000000 R09: ffff8a93e157d6d0
[166164.933240] R10: 0000000000000000 R11: ffffffffc0a40188 R12: 0000000000000003
[166164.933241] R13: ffff8a9402200e80 R14: ffff8a90001fe900 R15: 0000000000000000
[166164.933244] FS:  00007f7fb041eb00(0000) GS:ffff8a9411500000(0000)
knlGS:0000000000000000
[166164.933245] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[166164.933246] CR2: 0000000000000018 CR3: 00000000352c2003 CR4: 00000000003606e0
[166164.933247] Call Trace:
[166164.933264]  auxdev_open+0x1b/0x40 [drm_kms_helper]
[166164.933278]  chrdev_open+0xa7/0x1c0
[166164.933282]  ? cdev_put.part.0+0x20/0x20
[166164.933287]  do_dentry_open+0x161/0x3c0
[166164.933291]  vfs_open+0x2d/0x30
[166164.933297]  path_openat+0xb27/0x10e0
[166164.933306]  ? atime_needs_update+0x73/0xd0
[166164.933309]  do_filp_open+0x91/0x100
[166164.933313]  ? __alloc_fd+0xb2/0x150
[166164.933316]  do_sys_openat2+0x210/0x2d0
[166164.933318]  do_sys_open+0x46/0x80
[166164.933320]  __x64_sys_openat+0x20/0x30
[166164.933328]  do_syscall_64+0x52/0xc0
[166164.933336]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

(gdb) disassemble drm_dp_aux_dev_get_by_minor+0x29
Dump of assembler code for function drm_dp_aux_dev_get_by_minor:
   0x0000000000017b10 <+0>:     callq  0x17b15 
   0x0000000000017b15 <+5>:     push   %rbp
   0x0000000000017b16 <+6>:     mov    %rsp,%rbp
   0x0000000000017b19 <+9>:     push   %r12
   0x0000000000017b1b <+11>:    mov    %edi,%r12d
   0x0000000000017b1e <+14>:    mov    $0x0,%rdi
   0x0000000000017b25 <+21>:    callq  0x17b2a 
   0x0000000000017b2a <+26>:    mov    %r12d,%esi
   0x0000000000017b2d <+29>:    mov    $0x0,%rdi
   0x0000000000017b34 <+36>:    callq  0x17b39 
   0x0000000000017b39 <+41>:    mov    0x18(%rax),%edx <=========
   0x0000000000017b3c <+44>:    mov    %rax,%r12
   0x0000000000017b3f <+47>:    lea    0x18(%rax),%rdi
   0x0000000000017b43 <+51>:    test   %edx,%edx
   0x0000000000017b45 <+53>:    je     0x17b7a 
   0x0000000000017b47 <+55>:    lea    0x1(%rdx),%ecx
   0x0000000000017b4a <+58>:    mov    %edx,%eax
   0x0000000000017b4c <+60>:    lock cmpxchg %ecx,(%rdi)
   0x0000000000017b50 <+64>:    jne    0x17b76 
   0x0000000000017b52 <+66>:    test   %edx,%edx
   0x0000000000017b54 <+68>:    js     0x17b6d 
   0x0000000000017b56 <+70>:    test   %ecx,%ecx
   0x0000000000017b58 <+72>:    js     0x17b6d 
   0x0000000000017b5a <+74>:    mov    $0x0,%rdi
   0x0000000000017b61 <+81>:    callq  0x17b66 
   0x0000000000017b66 <+86>:    mov    %r12,%rax
   0x0000000000017b69 <+89>:    pop    %r12
   0x0000000000017b6b <+91>:    pop    %rbp
   0x0000000000017b6c <+92>:    retq
   0x0000000000017b6d <+93>:    xor    %esi,%esi
   0x0000000000017b6f <+95>:    callq  0x17b74 
   0x0000000000017b74 <+100>:   jmp    0x17b5a 
   0x0000000000017b76 <+102>:   mov    %eax,%edx
   0x0000000000017b78 <+104>:   jmp    0x17b43 
   0x0000000000017b7a <+106>:   xor    %r12d,%r12d
   0x0000000000017b7d <+109>:   jmp    0x17b5a 
End of assembler dump.

(gdb) list *drm_dp_aux_dev_get_by_minor+0x29
0x17b39 is in drm_dp_aux_dev_get_by_minor (drivers/gpu/drm/drm_dp_aux_dev.c:65).
60      static struct drm_dp_aux_dev *drm_dp_aux_dev_get_by_minor(unsigned index)
61      {
62              struct drm_dp_aux_dev *aux_dev = NULL;
63
64              mutex_lock(&aux_idr_mutex);
65              aux_dev = idr_find(&aux_idr, index);
66              if (!kref_get_unless_zero(&aux_dev->refcount))
67                      aux_dev = NULL;
68              mutex_unlock(&aux_idr_mutex);
69
(gdb) p/x &((struct drm_dp_aux_dev *)(0x0))->refcount
$8 = 0x18

Looking at the caller, checks on the minor are pushed down to
drm_dp_aux_dev_get_by_minor()

static int auxdev_open(struct inode *inode, struct file *file)
{
    unsigned int minor = iminor(inode);
    struct drm_dp_aux_dev *aux_dev;

    aux_dev = drm_dp_aux_dev_get_by_minor(minor); <====
    if (!aux_dev)
        return -ENODEV;

    file->private_data = aux_dev;
    return 0;
}

Fixes: e94cb37b34eb ("drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers.")
Cc:  # v4.6+
Signed-off-by: Zwane Mwaikambo 
Reviewed-by: Lyude Paul 
[added Cc to stable]
Signed-off-by: Lyude Paul 
Link: https://patchwork.freedesktop.org/patch/msgid/alpine.DEB.2.21.2010122231070.38717@montezuma.home
Signed-off-by: Greg Kroah-Hartman

drm/omap: dmm_tiler: fix return error code in omap_dmm_probe()

2020-12-30T10:25:54+00:00

[ Upstream commit 723ae803218da993143387bf966042eccefac077 ]

Return -ENOMEM when allocating refill memory failed.

Fixes: 71e8831f6407 ("drm/omap: DMM/TILER support for OMAP4+ platform")
Reported-by: Hulk Robot 
Signed-off-by: Yang Yingliang 
Signed-off-by: Thomas Zimmermann 
Link: https://patchwork.freedesktop.org/patch/msgid/20201117061045.3452287-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin

drm/msm/dsi_pll_10nm: restore VCO rate during restore_state

2020-12-30T10:25:51+00:00

[ Upstream commit a4ccc37693a271330a46208afbeaed939d54fdbb ]

PHY disable/enable resets PLL registers to default values. Thus in
addition to restoring several registers we also need to restore VCO rate
settings.

Signed-off-by: Dmitry Baryshkov 
Fixes: c6659785dfb3 ("drm/msm/dsi/pll: call vco set rate explicitly")
Signed-off-by: Rob Clark 
Signed-off-by: Sasha Levin

drm/tve200: Fix handling of platform_get_irq() error

2020-12-30T10:25:49+00:00

[ Upstream commit 77bb5aaf2bb8180e7d1bb70b4df306f511707a7d ]

platform_get_irq() returns -ERRNO on error.  In such case comparison
to 0 would pass the check.

Fixes: 179c02fe90a4 ("drm/tve200: Add new driver for TVE200")
Signed-off-by: Krzysztof Kozlowski 
Acked-by: Linus Walleij 
Signed-off-by: Sam Ravnborg 
Link: https://patchwork.freedesktop.org/patch/msgid/20200827071107.27429-2-krzk@kernel.org
Signed-off-by: Sasha Levin

drm/gma500: fix double free of gma_connector

2020-12-30T10:25:49+00:00

[ Upstream commit 4e19d51ca5b28a1d435a844c7b2a8e1b1b6fa237 ]

clang static analysis reports this problem:

cdv_intel_dp.c:2101:2: warning: Attempt to free released memory
        kfree(gma_connector);
        ^~~~~~~~~~~~~~~~~~~~

In cdv_intel_dp_init() when the call to cdv_intel_edp_panel_vdd_off()
fails, the handler calls cdv_intel_dp_destroy(connector) which does
the first free of gma_connector. So adjust the goto label and skip
the second free.

Fixes: d112a8163f83 ("gma500/cdv: Add eDP support")
Signed-off-by: Tom Rix 
Signed-off-by: Daniel Vetter 
Link: https://patchwork.freedesktop.org/patch/msgid/20201003193928.18869-1-trix@redhat.com
Signed-off-by: Sasha Levin

drm/tegra: sor: Disable clocks on error in tegra_sor_init()

2020-12-30T10:25:46+00:00

[ Upstream commit bf3a3cdcad40e5928a22ea0fd200d17fd6d6308d ]

Fix the missing clk_disable_unprepare() before return from
tegra_sor_init() in the error handling case.

Signed-off-by: Qinglang Miao 
Signed-off-by: Thierry Reding 
Signed-off-by: Sasha Levin

drm/tegra: replace idr_init() by idr_init_base()

2020-12-30T10:25:45+00:00

[ Upstream commit 41f71629b4c432f8dd47d70ace813be5f79d4d75 ]

idr_init() uses base 0 which is an invalid identifier for this driver.
The new function idr_init_base allows IDR to set the ID lookup from
base 1. This avoids all lookups that otherwise starts from 0 since
0 is always unused.

References: commit 6ce711f27500 ("idr: Make 1-based IDRs more efficient")

Signed-off-by: Deepak R Varma 
Signed-off-by: Thierry Reding 
Signed-off-by: Sasha Levin

drm: fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi

2020-12-30T10:25:43+00:00

commit a34a0a632dd991a371fec56431d73279f9c54029 upstream

drm_dp_mst_allocate_vcpi() invokes
drm_dp_mst_topology_get_port_validated(), which increases the refcount
of the "port".

These reference counting issues take place in two exception handling
paths separately. Either when “slots” is less than 0 or when
drm_dp_init_vcpi() returns a negative value, the function forgets to
reduce the refcnt increased drm_dp_mst_topology_get_port_validated(),
which results in a refcount leak.

Fix these issues by pulling up the error handling when "slots" is less
than 0, and calling drm_dp_mst_topology_put_port() before termination
when drm_dp_init_vcpi() returns a negative value.

Fixes: 1e797f556c61 ("drm/dp: Split drm_dp_mst_allocate_vcpi")
Cc:  # v4.12+
Signed-off-by: Xiyu Yang 
Signed-off-by: Xin Tan 
Signed-off-by: Xin Xiong 
Reviewed-by: Lyude Paul 
Signed-off-by: Lyude Paul 
Link: https://patchwork.freedesktop.org/patch/msgid/20200719154545.GA41231@xin-virtual-machine
[sudip: use old functions before rename]
Signed-off-by: Sudip Mukherjee 
Signed-off-by: Greg Kroah-Hartman

drm/xen-front: Fix misused IS_ERR_OR_NULL checks

2020-12-30T10:25:43+00:00

commit 14dee058610446aa464254fc5c8e88c7535195e0 upstream

The patch c575b7eeb89f: "drm/xen-front: Add support for Xen PV
display frontend" from Apr 3, 2018, leads to the following static
checker warning:

	drivers/gpu/drm/xen/xen_drm_front_gem.c:140 xen_drm_front_gem_create()
	warn: passing zero to 'ERR_CAST'

drivers/gpu/drm/xen/xen_drm_front_gem.c
   133  struct drm_gem_object *xen_drm_front_gem_create(struct drm_device *dev,
   134                                                  size_t size)
   135  {
   136          struct xen_gem_object *xen_obj;
   137
   138          xen_obj = gem_create(dev, size);
   139          if (IS_ERR_OR_NULL(xen_obj))
   140                  return ERR_CAST(xen_obj);

Fix this and the rest of misused places with IS_ERR_OR_NULL in the
driver.

Fixes:  c575b7eeb89f: "drm/xen-front: Add support for Xen PV display frontend"

Signed-off-by: Oleksandr Andrushchenko 
Reported-by: Dan Carpenter 
Reviewed-by: Dan Carpenter 
Cc: 
Link: https://lore.kernel.org/r/20200813062113.11030-3-andr2000@gmail.com
Signed-off-by: Juergen Gross 
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee 
Signed-off-by: Greg Kroah-Hartman

drm/atomic_helper: Stop modesets on unregistered connectors harder

2020-12-02T07:48:08+00:00

commit de9f8eea5a44b0b756d3d6345af7f8e630a3c8c0 upstream.

Unfortunately, it appears our fix in:
commit b5d29843d8ef ("drm/atomic_helper: Allow DPMS On<->Off changes
for unregistered connectors")

Which attempted to work around the problems introduced by:
commit 4d80273976bf ("drm/atomic_helper: Disallow new modesets on
unregistered connectors")

Is still not the right solution, as modesets can still be triggered
outside of drm_atomic_set_crtc_for_connector().

So in order to fix this, while still being careful that we don't break
modesets that a driver may perform before being registered with
userspace, we replace connector->registered with a tristate member,
connector->registration_state. This allows us to keep track of whether
or not a connector is still initializing and hasn't been exposed to
userspace, is currently registered and exposed to userspace, or has been
legitimately removed from the system after having once been present.

Using this info, we can prevent userspace from performing new modesets
on unregistered connectors while still allowing the driver to perform
modesets on unregistered connectors before the driver has finished being
registered.

Changes since v1:
- Fix WARN_ON() in drm_connector_cleanup() that CI caught with this
  patchset in igt@drv_module_reload@basic-reload-inject and
  igt@drv_module_reload@basic-reload by checking if the connector is
  registered instead of unregistered, as calling drm_connector_cleanup()
  on a connector that hasn't been registered with userspace yet should
  stay valid.
- Remove unregistered_connector_check(), and just go back to what we
  were doing before in commit 4d80273976bf ("drm/atomic_helper: Disallow
  new modesets on unregistered connectors") except replacing
  READ_ONCE(connector->registered) with drm_connector_is_unregistered().
  This gets rid of the behavior of allowing DPMS On<->Off, but that should
  be fine as it's more consistent with the UAPI we had before - danvet
- s/drm_connector_unregistered/drm_connector_is_unregistered/ - danvet
- Update documentation, fix some typos.

Fixes: b5d29843d8ef ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors")
Cc: Ville Syrjälä 
Cc: Daniel Vetter 
Cc: Rodrigo Vivi 
Cc: stable@vger.kernel.org
Cc: David Airlie 
Signed-off-by: Lyude Paul 
Reviewed-by: Daniel Vetter 
Link: https://patchwork.freedesktop.org/patch/msgid/20181016203946.9601-1-lyude@redhat.com
(cherry picked from commit 39b50c603878f4f8ae541ac4088a805d588abc79)
Fixes: e96550956fbc ("drm/atomic_helper: Disallow new modesets on unregistered connectors")
Fixes: 34ca26a98ad6 ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors")
Cc: stable@vger.kernel.org
Signed-off-by: Joonas Lahtinen 
Cc: Christoph Niedermaier 
Signed-off-by: Greg Kroah-Hartman