linux-stable.git/drivers/gpu, branch linux-3.11.y Linux kernel stable tree drm/nvc0-/gr: fix a number of missing explicit array terminators... 2013-11-29T18:42:15+00:00 Ben Skeggs bskeggs@redhat.com 2013-11-04T23:28:26+00:00 3cc16ca407c0284e4a4ee72a360b264e068772c2 commit 13d2b35a065399fb447c84e80368927e5f8bf086 upstream. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 13d2b35a065399fb447c84e80368927e5f8bf086 upstream.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/i915/dp: workaround BIOS eDP bpp clamping issue 2013-11-20T20:31:39+00:00 Jani Nikula jani.nikula@intel.com 2013-10-21T07:52:07+00:00 747b00783906993edb8289641d92663e87b3a3f3 commit c6cd2ee2d59111a07cd9199564c9bdcb2d11e5cf upstream. This isn't a real fix to the problem, but rather a stopgap measure while trying to find a proper solution. There are several laptops out there that fail to light up the eDP panel in UEFI boot mode. They seem to be mostly IVB machines, including but apparently not limited to Dell XPS 13, Asus TX300, Asus UX31A, Asus UX32VD, Acer Aspire S7. They seem to work in CSM or legacy boot. The difference between UEFI and CSM is that the BIOS provides a different VBT to the kernel. The UEFI VBT typically specifies 18 bpp and 1.62 GHz link for eDP, while CSM VBT has 24 bpp and 2.7 GHz link. We end up clamping to 18 bpp in UEFI mode, which we can fit in the 1.62 Ghz link, and for reasons yet unknown fail to light up the panel. Dithering from 24 to 18 bpp itself seems to work; if we use 18 bpp with 2.7 GHz link, the eDP panel lights up. So essentially this is a link speed issue, and *not* a bpp clamping issue. The bug raised its head since commit 657445fe8660100ad174600ebfa61536392b7624 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat May 4 10:09:18 2013 +0200 Revert "drm/i915: revert eDP bpp clamping code changes" which started clamping bpp *before* computing the link requirements, and thus affecting the required bandwidth. Clamping after the computations kept the link at 2.7 GHz. Even though the BIOS tells us to use 18 bpp through the VBT, it happily boots up at 24 bpp and 2.7 GHz itself! Use this information to selectively ignore the VBT provided value. We can't ignore the VBT eDP bpp altogether, as there are other laptops that do require the clamping to be used due to EDID reporting higher bpp than the panel can support. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59841 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67950 Tested-by: Ulf Winkelvos <ulf@winkelvos.de> Tested-by: jkp <jkp@iki.fi> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [Jani: stable 3.11 backport] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c6cd2ee2d59111a07cd9199564c9bdcb2d11e5cf upstream.

This isn't a real fix to the problem, but rather a stopgap measure while
trying to find a proper solution.

There are several laptops out there that fail to light up the eDP panel
in UEFI boot mode. They seem to be mostly IVB machines, including but
apparently not limited to Dell XPS 13, Asus TX300, Asus UX31A, Asus
UX32VD, Acer Aspire S7. They seem to work in CSM or legacy boot.

The difference between UEFI and CSM is that the BIOS provides a
different VBT to the kernel. The UEFI VBT typically specifies 18 bpp and
1.62 GHz link for eDP, while CSM VBT has 24 bpp and 2.7 GHz link. We end
up clamping to 18 bpp in UEFI mode, which we can fit in the 1.62 Ghz
link, and for reasons yet unknown fail to light up the panel.

Dithering from 24 to 18 bpp itself seems to work; if we use 18 bpp with
2.7 GHz link, the eDP panel lights up. So essentially this is a link
speed issue, and *not* a bpp clamping issue.

The bug raised its head since
commit 657445fe8660100ad174600ebfa61536392b7624
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sat May 4 10:09:18 2013 +0200

    Revert "drm/i915: revert eDP bpp clamping code changes"

which started clamping bpp *before* computing the link requirements, and
thus affecting the required bandwidth. Clamping after the computations
kept the link at 2.7 GHz.

Even though the BIOS tells us to use 18 bpp through the VBT, it happily
boots up at 24 bpp and 2.7 GHz itself! Use this information to
selectively ignore the VBT provided value.

We can't ignore the VBT eDP bpp altogether, as there are other laptops
that do require the clamping to be used due to EDID reporting higher bpp
than the panel can support.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59841
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67950
Tested-by: Ulf Winkelvos <ulf@winkelvos.de>
Tested-by: jkp <jkp@iki.fi>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[Jani: stable 3.11 backport]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/i915: Fix the PPT fdi lane bifurcate state handling on ivb 2013-11-13T03:08:12+00:00 Daniel Vetter daniel.vetter@ffwll.ch 2013-10-29T11:04:08+00:00 51528f7f9d6795fa67accdc5543a51949c416a42 commit 1fbc0d789d12fec313c91912fc11733fdfbab863 upstream. Originally I've thought that this is leftover hw state dirt from the BIOS. But after way too much helpless flailing around on my part I've noticed that the actual bug is when we change the state of an already active pipe. For example when we change the fdi lines from 2 to 3 without switching off outputs in-between we'll never see the crucial on->off transition in the ->modeset_global_resources hook the current logic relies on. Patch version 2 got this right by instead also checking whether the pipe is indeed active. But that in turn broke things when pipes have been turned off through dpms since the bifurcate enabling is done in the ->crtc_mode_set callback. To address this issues discussed with Ville in the patch review move the setting of the bifurcate bit into the ->crtc_enable hook. That way we won't wreak havoc with this state when userspace puts all other outputs into dpms off state. This also moves us forward with our overall goal to unify the modeset and dpms on paths (which we need to have to allow runtime pm in the dpms off state). Unfortunately this requires us to move the bifurcate helpers around a bit. Also update the commit message, I've misanalyzed the bug rather badly. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70507 Tested-by: Jan-Michael Brummer <jan.brummer@tabos.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1fbc0d789d12fec313c91912fc11733fdfbab863 upstream.

Originally I've thought that this is leftover hw state dirt from the
BIOS. But after way too much helpless flailing around on my part I've
noticed that the actual bug is when we change the state of an already
active pipe.

For example when we change the fdi lines from 2 to 3 without switching
off outputs in-between we'll never see the crucial on->off transition
in the ->modeset_global_resources hook the current logic relies on.

Patch version 2 got this right by instead also checking whether the
pipe is indeed active. But that in turn broke things when pipes have
been turned off through dpms since the bifurcate enabling is done in
the ->crtc_mode_set callback.

To address this issues discussed with Ville in the patch review move
the setting of the bifurcate bit into the ->crtc_enable hook. That way
we won't wreak havoc with this state when userspace puts all other
outputs into dpms off state. This also moves us forward with our
overall goal to unify the modeset and dpms on paths (which we need to
have to allow runtime pm in the dpms off state).

Unfortunately this requires us to move the bifurcate helpers around a
bit.

Also update the commit message, I've misanalyzed the bug rather badly.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70507
Tested-by: Jan-Michael Brummer <jan.brummer@tabos.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/i915: No LVDS hardware on Intel D410PT and D425KT 2013-11-13T03:08:11+00:00 Rob Pearce rob@flitspace.org.uk 2013-10-27T16:13:42+00:00 d727a6888ac39dee06bbefcda50596a7c85105aa commit 645378d85ee524e429aa4cf52806047b56cdc596 upstream. The Intel D410PT(LW) and D425KT Mini-ITX desktop boards both show up as having LVDS but the hardware is not populated. This patch adds them to the list of such systems. Patch is against 3.11.4 v2: Patch revised to match the D425KT exactly as the D425KTW does have LVDS. According to Intel's documentation, the D410PTL and D410PLTW don't. Signed-off-by: Rob Pearce <rob@flitspace.org.uk> [danvet: Pimp commit message to my liking and add cc: stable.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 645378d85ee524e429aa4cf52806047b56cdc596 upstream.

The Intel D410PT(LW) and D425KT Mini-ITX desktop boards both show up as
having LVDS but the hardware is not populated. This patch adds them to
the list of such systems. Patch is against 3.11.4

v2: Patch revised to match the D425KT exactly as the D425KTW does have
LVDS.  According to Intel's documentation, the D410PTL and D410PLTW
don't.

Signed-off-by: Rob Pearce <rob@flitspace.org.uk>
[danvet: Pimp commit message to my liking and add cc: stable.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/i915: Add support for pipe_bpp readout 2013-11-13T03:08:11+00:00 Ville Syrjälä ville.syrjala@linux.intel.com 2013-10-21T07:52:06+00:00 4eef610aa86d861efcb43ce4a8f741c55e806bf3 commit 4f56d12ebb28fceac4c6e60c8993fbfc122e1399 upstream. On CTG+ read out the pipe bpp setting from hardware and fill it into pipe config. Also check it appropriately. v2: Don't do the pipe_bpp extraction inside the PCH only code block on ILK+. Avoid the PIPECONF read as we already have read it for the PIPECONF_EANBLE check. Note: This is already in drm-intel-next-queued as commit 42571aefafb1d330ef84eb29418832f72e7dfb4c Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Fri Sep 6 23:29:00 2013 +0300 drm/i915: Add support for pipe_bpp readout but is needed for the following bugfix. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4f56d12ebb28fceac4c6e60c8993fbfc122e1399 upstream.

On CTG+ read out the pipe bpp setting from hardware and fill it into
pipe config. Also check it appropriately.

v2: Don't do the pipe_bpp extraction inside the PCH only code block on
    ILK+.
    Avoid the PIPECONF read as we already have read it for the
    PIPECONF_EANBLE check.

Note: This is already in drm-intel-next-queued as
commit 42571aefafb1d330ef84eb29418832f72e7dfb4c
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Fri Sep 6 23:29:00 2013 +0300

    drm/i915: Add support for pipe_bpp readout

but is needed for the following bugfix.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/i915: Add HSW CRT output readout support 2013-11-13T03:08:11+00:00 Ville Syrjälä ville.syrjala@linux.intel.com 2013-09-24T11:24:05+00:00 9741538fbf9191a46b80333e003a49ea34d789d3 commit 7195a50b5c7e00cc3312934fd022c3006b533d12 upstream. Call intel_ddi_get_config() to get the pipe_bpp settings from DDI. The sync polarity settings from DDI are irrelevant for CRT output, so override them with data from the ADPA register. Note: This is already merged in drm-intel-next-queued as commit 6801c18c0a43386bb44712cbc028a7e05adb9f0d Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Tue Sep 24 14:24:05 2013 +0300 drm/i915: Add HSW CRT output readout support but is required for the following edp bpp bugfix. v2: Extract intel_crt_get_flags() Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69691 Tested-by: Qingshuai Tian <qingshuai.tian@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7195a50b5c7e00cc3312934fd022c3006b533d12 upstream.

Call intel_ddi_get_config() to get the pipe_bpp settings from
DDI.

The sync polarity settings from DDI are irrelevant for CRT
output, so override them with data from the ADPA register.

Note: This is already merged in drm-intel-next-queued as

commit 6801c18c0a43386bb44712cbc028a7e05adb9f0d
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Tue Sep 24 14:24:05 2013 +0300

    drm/i915: Add HSW CRT output readout support

but is required for the following edp bpp bugfix.

v2: Extract intel_crt_get_flags()

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69691
Tested-by: Qingshuai Tian <qingshuai.tian@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/radeon: make missing smc ucode non-fatal (r7xx-SI) 2013-11-13T03:08:11+00:00 Alex Deucher alexander.deucher@amd.com 2013-10-16T15:36:30+00:00 25f1734b8fc6531dce3b8c9de5423bee71b76035 commit d83671126dc8e7c0b56c9970ea5ffd08c3b0c645 upstream. Prevent driver load problems if the smc is missing. bug: https://bugzilla.kernel.org/show_bug.cgi?id=63011 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit d83671126dc8e7c0b56c9970ea5ffd08c3b0c645 upstream.

Prevent driver load problems if the smc is missing.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=63011

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/radeon/atom: workaround vbios bug in transmitter table on rs780 2013-11-13T03:08:11+00:00 Alex Deucher alexander.deucher@amd.com 2013-10-10T20:45:27+00:00 1417cc5548ba834a8ecef56f86ae682670b12490 commit c23632d4e57c0dd20bf50eca08fa0eb8ad3ff680 upstream. Some rs780 asics seem to be affected as well. See: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=91f3a6aaf280294b07c05dfe606e6c27b7ba3c72 Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=60791 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c23632d4e57c0dd20bf50eca08fa0eb8ad3ff680 upstream.

Some rs780 asics seem to be affected as well.

See:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=91f3a6aaf280294b07c05dfe606e6c27b7ba3c72

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=60791

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm: Prevent overwriting from userspace underallocating core ioctl structs 2013-11-13T03:08:11+00:00 Chris Wilson chris@chris-wilson.co.uk 2013-10-16T10:22:44+00:00 8528076a9922966b93b7b12e104cd3fdcd8fee3f commit b062672e305ce071f21eb9e18b102c2a430e0999 upstream. Apply the protections from commit 1b2f1489633888d4a06028315dc19d65768a1c05 Author: Dave Airlie <airlied@redhat.com> Date: Sat Aug 14 20:20:34 2010 +1000 drm: block userspace under allocating buffer and having drivers overwrite it (v2) to the core ioctl structs as well, for we found one instance where there is a 32-/64-bit size mismatch and were guilty of writing beyond the end of the user's buffer. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Airlie <airlied@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b062672e305ce071f21eb9e18b102c2a430e0999 upstream.

Apply the protections from

commit 1b2f1489633888d4a06028315dc19d65768a1c05
Author: Dave Airlie <airlied@redhat.com>
Date:   Sat Aug 14 20:20:34 2010 +1000

    drm: block userspace under allocating buffer and having drivers overwrite it (v2)

to the core ioctl structs as well, for we found one instance where there
is a 32-/64-bit size mismatch and were guilty of writing beyond the end
of the user's buffer.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/i915: Retry DP aux_ch communications with a different clock after failure 2013-11-13T03:08:11+00:00 Chris Wilson chris@chris-wilson.co.uk 2013-07-21T15:00:03+00:00 ef4ea0912a5dd2b67353f83acd09d651650cba8f commit bc86625a4ff7574d4d4dba79723457711eb784e0 upstream. The w/a db makes the recommendation to both use a non-default value for the initial clock and then to retry with an alternative clock for Haswell with the Lakeport PCH. "On LPT:H, use a divider value of 63 decimal (03Fh). If there is a failure, retry at least three times with 63, then retry at least three times with 72 decimal (048h)." Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit bc86625a4ff7574d4d4dba79723457711eb784e0 upstream.

The w/a db makes the recommendation to both use a non-default value for
the initial clock and then to retry with an alternative clock for
Haswell with the Lakeport PCH.

"On LPT:H, use a divider value of 63 decimal (03Fh). If there is a
failure, retry at least three times with 63, then retry at least three
times with 72 decimal (048h)."

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>