linux-stable.git/drivers/gpu/drm, branch v5.2.5

drm/i915: Make the semaphore saturation mask global

2019-07-31T05:25:03+00:00

commit 44d89409a12eb8333735958509d7d591b461d13d upstream.

The idea behind keeping the saturation mask local to a context backfired
spectacularly. The premise with the local mask was that we would be more
proactive in attempting to use semaphores after each time the context
idled, and that all new contexts would attempt to use semaphores
ignoring the current state of the system. This turns out to be horribly
optimistic. If the system state is still oversaturated and the existing
workloads have all stopped using semaphores, the new workloads would
attempt to use semaphores and be deprioritised behind real work. The
new contexts would not switch off using semaphores until their initial
batch of low priority work had completed. Given sufficient backload load
of equal user priority, this would completely starve the new work of any
GPU time.

To compensate, remove the local tracking in favour of keeping it as
global state on the engine -- once the system is saturated and
semaphores are disabled, everyone stops attempting to use semaphores
until the system is idle again. One of the reason for preferring local
context tracking was that it worked with virtual engines, so for
switching to global state we could either do a complete check of all the
virtual siblings or simply disable semaphores for those requests. This
takes the simpler approach of disabling semaphores on virtual engines.

The downside is that the decision that the engine is saturated is a
local measure -- we are only checking whether or not this context was
scheduled in a timely fashion, it may be legitimately delayed due to user
priorities. We still have the same dilemma though, that we do not want
to employ the semaphore poll unless it will be used.

v2: Explain why we need to assume the worst wrt virtual engines.

Fixes: ca6e56f654e7 ("drm/i915: Disable semaphore busywaits on saturated systems")
Signed-off-by: Chris Wilson 
Cc: Tvrtko Ursulin 
Cc: Dmitry Rogozhkin 
Cc: Dmitry Ermilov 
Reviewed-by: Tvrtko Ursulin 
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074153.16055-8-chris@chris-wilson.co.uk
Signed-off-by: Joonas Lahtinen 
Signed-off-by: Greg Kroah-Hartman

drm/panel: Add support for Armadeus ST0700 Adapt

2019-07-31T05:24:59+00:00

commit c479450f61c7f1f248c9a54aedacd2a6ca521ff8 upstream.

This patch adds support for the Armadeus ST0700 Adapt. It comes with a
Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT and an adapter board so
that it can be connected on the TFT header of Armadeus Dev boards.

Cc: stable@vger.kernel.org # v4.19
Reviewed-by: Rob Herring 
Signed-off-by: Sébastien Szymanski 
Signed-off-by: Sam Ravnborg 
Link: https://patchwork.freedesktop.org/patch/msgid/20190507152713.27494-1-sebastien.szymanski@armadeus.com
Signed-off-by: Greg Kroah-Hartman

drm/msm: Depopulate platform on probe failure

2019-07-31T05:24:42+00:00

[ Upstream commit 4368a1539c6b41ac3cddc06f5a5117952998804c ]

add_display_components() calls of_platform_populate, and we depopluate
on pdev remove, but not when probe fails. So if we get a probe deferral
in one of the components, we won't depopulate the platform. This causes
the core to keep references to devices which should be destroyed, which
causes issues when those same devices try to re-initialize on the next
probe attempt.

I think this is the reason we had issues with the gmu's device-managed
resources on deferral (worked around in commit 94e3a17f33a5).

Reviewed-by: Rob Clark 
Signed-off-by: Sean Paul 
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-3-sean@poorly.run
Signed-off-by: Sasha Levin

drm/msm/adreno: Ensure that the zap shader region is big enough

2019-07-31T05:24:42+00:00

[ Upstream commit 6672e11cad662ce6631e04c38f92a140a99c042c ]

Before loading the zap shader we should ensure that the reserved memory
region is big enough to hold the loaded file.

Signed-off-by: Jordan Crouse 
Reviewed-by: Bjorn Andersson 
Reviewed-by: Jeffrey Hugo 
Signed-off-by: Rob Clark 
Signed-off-by: Sasha Levin

drm/rockchip: Properly adjust to a true clock in adjusted_mode

2019-07-31T05:24:40+00:00

[ Upstream commit 99b9683f2142b20bad78e61f7f829e8714e45685 ]

When fixing up the clock in vop_crtc_mode_fixup() we're not doing it
quite correctly.  Specifically if we've got the true clock 266666667 Hz,
we'll perform this calculation:
   266666667 / 1000 => 266666

Later when we try to set the clock we'll do clk_set_rate(266666 *
1000).  The common clock framework won't actually pick the proper clock
in this case since it always wants clocks <= the specified one.

Let's solve this by using DIV_ROUND_UP.

Fixes: b59b8de31497 ("drm/rockchip: return a true clock rate to adjusted_mode")
Signed-off-by: Douglas Anderson 
Signed-off-by: Sean Paul 
Reviewed-by: Yakir Yang 
Signed-off-by: Heiko Stuebner 
Link: https://patchwork.freedesktop.org/patch/msgid/20190614224730.98622-1-dianders@chromium.org
Signed-off-by: Sasha Levin

drm/bridge: tfp410: fix use of cancel_delayed_work_sync

2019-07-31T05:24:39+00:00

[ Upstream commit b1622cb3be4557fd086831ca7426eafe5f1acc2e ]

We use delayed_work in HPD handling, and cancel any scheduled work in
tfp410_fini using cancel_delayed_work_sync(). However, we have only
initialized the delayed work if we actually have a HPD interrupt
configured in the DT, but in the tfp410_fini, we always cancel the work,
possibly causing a WARN().

Fix this by doing the cancel only if we actually had the delayed work
set up.

Signed-off-by: Tomi Valkeinen 
Signed-off-by: Andrzej Hajda 
Link: https://patchwork.freedesktop.org/patch/msgid/20190610135739.6077-2-tomi.valkeinen@ti.com
Signed-off-by: Sasha Levin

drm/amd/display: fix compilation error

2019-07-31T05:24:39+00:00

[ Upstream commit 88099f53cc3717437f5fc9cf84205c5b65118377 ]

this patch fixes below compilation error

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c: In
function ‘dcn10_apply_ctx_for_surface’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:2378:3:
error: implicit declaration of function ‘udelay’
[-Werror=implicit-function-declaration]
   udelay(underflow_check_delay_us);

Signed-off-by: Hariprasad Kelam 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

drm/amd/display: set link->dongle_max_pix_clk to 0 on a disconnect

2019-07-31T05:24:39+00:00

[ Upstream commit 233d87a579b8adcc6da5823fa507ecb6675e7562 ]

[Why]
Found issue in EDID Emulation where if we connect a display using
 a passive HDMI-DP dongle, disconnect it and then try to emulate
 a display using DP, we could not see 4K modes.  This was because
 on a disconnect, dongle_max_pix_clk was still set so when we
 emulate using DP, in dc_link_validate_mode_timing(), it would
 think we were still using a dongle and limit the modes we support.

[How]
In dc_link_detect(), set dongle_max_pix_clk to 0 when we detect
 a hotplug out ( if new_connection_type = dc_connection_none ).

Signed-off-by: Samson Tam 
Reviewed-by: Jun Lei 
Acked-by: Bhawanpreet Lakha 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin

drm/virtio: Add memory barriers for capset cache.

2019-07-31T05:24:39+00:00

[ Upstream commit 9ff3a5c88e1f1ab17a31402b96d45abe14aab9d7 ]

After data is copied to the cache entry, atomic_set is used indicate
that the data is the entry is valid without appropriate memory barriers.
Similarly the read side was missing the corresponding memory barriers.

Signed-off-by: David Riley 
Link: http://patchwork.freedesktop.org/patch/msgid/20190610211810.253227-5-davidriley@chromium.org
Signed-off-by: Gerd Hoffmann 
Signed-off-by: Sasha Levin

drm/amd/display: Update link rate from DPCD 10

2019-07-31T05:24:38+00:00

[ Upstream commit 53c81fc7875bc2dca358485dac3999e14ec91a00 ]

[WHY]
Some panels return a link rate of 0 (unknown) in DPCD 0. In this case,
an appropriate mode cannot be set, and certain panels will show
corruption as they are forced to use a mode they do not support.

[HOW]
Read DPCD 10 in the case where supported link rate from DPCD 0 is
unknown, and pass that value on to the reported link rate.
This re-introduces behaviour present in previous versions that appears
to have been accidentally removed.

Signed-off-by: Wesley Chalmers 
Reviewed-by: Anthony Koo 
Acked-by: Bhawanpreet Lakha 
Signed-off-by: Alex Deucher 
Signed-off-by: Sasha Levin